• europages
  • >
  • COMPANIES - SUPPLIERS - SERVICE PROVIDERS
  • >
  • manufacture of steel tubes

Results for

Manufacture of steel tubes - Import export

Tunisia

Verified by Europages

Electric Resistance Welded Tubes

Request for a quote

Portugal

Verified by Europages

Ornamental, structural, precision, process Carbon steel- stainless steels

Request for a quote

United States

347 (UNS S34700/1.4550) is a fully austenitic niobium stabilised stainless steel. The addition of Niobium reduces the creation of carbide precipitation in service between 430 to 900 degrees C and during welding processes and increases the mechanical strength of the material. This grade has good resistance to oxidation and corrosion along with good creep strength and can be used at temperatures where carbide precipitation may occur in non-stabilised grades e.g., 304. It is used principally in aerospace exhaust manifolds and engine components, chemical processing equipment running at high temperatures and in nuclear processing piping. Please note that we have a minimum order value of £10,000.

Request for a quote

United States

Surgical Implant 316L is a double melted stainless steel, regarded as a medical grade, this stainless steel is melted to achieve high levels of purity and cleanliness. It has excellent resistance to both general and intergranular corrosion, and pitting and crevice corrosion. The double melting allows for superior surface finish. Surgical implant 316L Stainless Steel is our most commonly sold medical stainless steel. Beyond removing impurities, this process, in combination with the unique nickel and chromium content of 316, tends to facilitate the formation of the surface chromium oxide layer that makes stainless steel corrosion resistant. There is some belief that surgical implant 316L forms a more substantial surface layer, and that this plays a strong role in protecting the host body from reactions to the nickel content of the material. Please note that we have a minimum order value of £10,000.

Request for a quote

United States

Stainless steel grades cover a wide range of compositions which result in the generation of a variety of microstructures and mechanical properties. This group of alloys is useful for the replacement of mild steel in structures and components. Stainless Steel tubes manufactured by Fine Tubes have an excellent combination of corrosion resistance, metallurgical stability and formabilityStainless steels are favoured because they are very cost effective. They also have an excellent combination of corrosion resistance, metallurgical stability, formability, and are easily welded. Their fabrication characteristics, good mechanical properties and attractive finished appearance make high quality stainless steel tubing a popular choice in a range of industries. Please note that we have a minimum order value of £10,000.

Request for a quote

United States

Fine Tubes manufactures a range of specialist stainless steel tubes used to produce high-performance and ultra high-performance liquid chromatography (HPLC and UPLC) columns. Our tubes are components in both liquid and gas chromatography columns which are used for analytical and preparative processes across the fields of biochemistry and analytical chemistry. Tightest Tolerance Control The control process during manufacture of these tubes is critical to meet the highest specifications demanded in this area. The percentage Cross Section Area Reduction (% CSAR) through pilgering and drawing is specific to each product’s dimensions and specifications. Surface Finish The ID surface finish is further refined by passivation, polishing or electro polishing processes. OD surfaces are finished down to 0.1μm (0.25μ") and ID down to 0.16μm (0.40μ") and 0.08μm (0.20μ") with electro polishing. Please note that we have a minimum order value of £10,000.

Request for a quote

United States

UNS NO8904, commonly known as 904L, is a low carbon high alloy austenitic stainless steel which is widely used in applications where the corrosion properties of AISI 316L and AISI 317L are not adequate. The addition of copper to this grade gives it corrosion resistant properties superior to the conventional chrome nickel stainless steels, in particular to sulphuric, phosphoric and acetic acids. However, there is limited use with hydrochloric acids. It also has a high resistance to pitting in chloride solutions, a high resistance to both crevice and stress corrosion cracking. Alloy 904L performs better than other austenitic stainless steels due to the higher alloying of nickel and molybdenum. The grade is non-magnetic in all conditions and has excellent formability and weldability. The austenitic structure also gives this grade excellent toughness, even down to cryogenic temperatures. Please note that we have a minimum order value of £10,000.

Request for a quote

United States

Welded and redrawn tube manufacturing employs elements of both the welded and seamless processes. A welded and redrawn tube is welded in a conventional manner but then transferred to our seamless mill, located in the same factory. Here the product is redrawn to achieve a welded and redrawn finish. The objective of redrawing is to achieve homogenisation of the weld following annealing by cold working. This refines the structure of the weld resulting in improvements that include: Better corrosion resistance Improved fatigue life Higher mechanical integrity Please note that we have a minimum order value of £10,000.

Request for a quote

United States

The high precision seamless tubes manufactured at Fine Tubes begin their journey as seamless tube extrusions, in a range of different sizes. This material is reduced in size several times until it gradually reaches the exact specifications our customers require. Each time we perform a reduction process, the tube needs to be cut, cleaned and heat treated before the next one can commence. Please note that we have a minimum order value of £10,000.

Request for a quote

Turkey

Welded Steel Tubes and Pipes Welded tubes for pressure purposes EN 10217-1 unalloyed tubes, room temperature Facts and Figures Diameter (OD)21,3 mm – 88,9 mm (hot stretch-reduced) 21,3 mm – 323,9 mm (cold formed) Wall thickness (WT)2,0 mm – 12,7 mm MaterialP195 TR1/TR2 P235 TR1/TR2 P265 TR1/TR2 VersionsBlack, galvanised, grooved, varnished, sheathed in PE, threaded, with sleeves Device pressure standardsAD-2000 W0 ATTEC Uluslararasi Dis Ticaret A.S. Barbaros Mah. Mor Sumbul Sk Varyap Meridian I Blok No: 1 Kat:17 D:238 Atasehir 34746 Istanbul/Turkiye Mr.Ahmet Becenoglu Export Marketing Manager Tel: +90 216 488 88 90 – 98 Fax:+90 216 488 98 38 Gsm:+90 532 787 90 89

Request for a quote

Turkey

SEAMLESS HOT ROLLED STEEL TUBES Seamless tubes for pressure purposes EN 10216-1 Unalloyed tubes, room temperature Seamless steel tubes of this standard have extraordinary pressure resistance at room temperature. Due to the production process, a great deal can be offered with regard to purpose optimized steel qualities. Upon request, an additional inspection can be carried out for a fee by an expert appointed by the customer. Facts and Figures Diameter (OD)21,3 mm – 610,0 mm Wall thickness (WT)2,0 mm – 60,0 mm MaterialPP195 TR1/TR2 P235 TR1/TR2 P265 TR2 Treatment condition+N Device pressure standardsAD-2000 W0 ATTEC Uluslararasi Dis Ticaret A.S. Barbaros Mah. Mor Sumbul Sk Varyap Meridian I Blok No: 1 Kat:17 D:238 Atasehir 34746 Istanbul/Turkiye Mr.Ahmet Becenoglu Export Marketing Manager Tel: +90 216 488 88 90 – 98 Fax:+90 216 488 98 38 Gsm:+90 532 787 90 89

Request for a quote

United States

Fine Tubes manufacturers medium and high-pressure tubing for a range of critical applications in several industries. Our products are crucial in oil and gas extraction projects, as well as in commercial and military aerospace programmes. Operating conditions can require our products to be rated up to 60,000psi operating pressure and with tensile strengths greater than 220ksi (1,515MPa). Oil and Gas Applications Our medium and high-pressure tubing is used in the most hostile downhole conditions including deepwater and sour oil well projects. Applications include precision instrumentation, chemical injection, and monitoring applications for downhole tools. Please note that we have a minimum order value of £10,000.

Request for a quote

United Kingdom

UKF Group stocks one of the largest ranges of perforated exhaust tube in Europe. Our Perforated Exhaust Tube finds application with automotive exhausts, and filtration systems. We offer standard 6011 pattern in Stainless Steel Grade 304 (1.4301) and Grade 409 (1.4512), from stock, in lengths up to 6 metres. Custom lengths and alternative patterns are available upon request.

Request for a quote

United States

Fine Tubes has a long history of manufacturing high-quality tubes for nuclear fuel rods, going back to the UK’s first generation of gas cooled reactors in the 1970s. Today we support customers worldwide at the earliest stages of design engineering for new builds, plant maintenance, global life extension projects and Small Modular Reactors (SMR). Nuclear Fuel Rods and Cans Our tubes are deployed in the nuclear fuel rods and cans of advanced gas-cooled reactors. Here they endure extreme temperatures and pressures. Precision, quality, and performance are crucial. Please note that we have a minimum order value of £10,000.

Request for a quote

Turkey

BOILER TUBES •EN 10216-2 •EN 10216-3 •EN 10217-2 •EN 10217-3 Seamless tubes for pressure purposes EN 10216-2 •unalloyed and alloyed tubes, increased temperature Seamless boiler tubes of this standard have extraordinary temperature and pressure resistance. Due to the production process, a great deal can be offered with regard to purpose-optimized steel qualities. Facts and Figures Diameter (OD)21,0 mm – 610 mm Wall thickness (WT)2,0 mm – 60,0 mm MaterialP195 GH P235 GH, P265 GH, 16Mo3 13CrMo4-5, 25CrMo4 10CrMo9-10 Treatment condition+N TestsTC1 (not including US testing) TC2 (including US testing) VersionsBlack, painted Device pressure standardsAD-2000 W0, AD 2000 W4, PED ATTEC Uluslararasi Dis Ticaret A.S. Barbaros Mah. Mor Sumbul Sk Varyap Meridian I Blok No: 1 Kat:17 D:238 Atasehir 34746 Istanbul/Turkiye Mr.Ahmet Becenoglu Export Marketing Manager Tel: +90 216 488 88 90 – 98 Fax:+90 216 488 98 38 Gsm:+90 532 787 90 89

Request for a quote

United States

The microstructures inside duplex stainless steels are approximately 50 per cent austenite and 50 per cent ferrite, and consequently duplex products share the physical properties of both ferritic and austenitic grades. Duplex stainless steels are resistant to the cracking caused by chloride stress corrosion in austenitic grades, and have improved resistance to localised corrosion. This family of stainless steels has roughly twice the yield strength of their counterpart austenitic grades . Higher hardness values provide better wear resistance for high precision tubes. Duplex stainless steel tubes have high hardness and wear resistance propertiesDuplex steels are easily welded and formed, similar to austenitic grades. Depending on chromium, nickel and molybdenum content, duplex stainless steels are divided into four main categories: lean duplex, duplex, super duplex and hyper duplex. Please note that we have a minimum order value of £10,000.

Request for a quote

United States

Grade 316 is the standard molybdenum-bearing grade, second inoverall volume production to 304 amongst the austenitic stainless steels. The molybdenum gives 316 better overall corrosion resistant properties than Grade 304, particularly higher resistance to pitting and crevice corrosion in chloride environments. Grade 316L, the low carbon version of 316 and has very high immunity from sensitization (grain boundary carbide precipitation). It is extensivly used in the oil and gas and chemical industries for its cost effective corrosion resistance and ease of fabrication. There is commonly no appreciable price difference between 316 and 316L stainless steel. The austenitic structure also gives these grades excellent toughness, even down to cryogenic temperatures. Compared to chromium-nickel austenitic stainless steels, 316L stainless steel offers higher creep, stress to rupture and tensile strength at elevated temperatures. Please note that we have a minimum order value of £10,000.

Request for a quote

Do you sell or make similar products?

Sign up to europages and have your products listed

Add my business

United States

21Cr-6Ni-9Mn is a high manganese nitrogen strengthened, austenitic stainless steel. It combines high strength in the annealed condition, excellent resistance to oxidation at high temperatures as well as good resistance to lead oxide and a high level of corrosion resistance at ambient temperatures. The alloy can be fabricated and formed much the same as type 304 and 316, and is readily wieldable. It remains nonmagnetic after severe cold work. Please note that we have a minimum order value of £10,000.

Request for a quote

United States

6 Mo (UNS S31254) is a super austenitic stainless steel with a high level of molybdenum and nitrogen, providing high resistance to pitting and crevice corrosion as well as high strength compared with conventional austenitic stainless steels such as 316L. The alloy can provide excellent resistance to stress corrosion cracking allowing tube cold formingand may be used without the necessity to re-anneal at testing up to 120°C. Please note that we have a minimum order value of £10,000.

Request for a quote

United States

316LN (UNS S31653) is a low-carbon, nitrogen-enhanced version of Type 316 molybdenum-bearing austenitic stainless steel. The Type 316 alloys are more resistant to general corrosion and pitting/crevice corrosion than the conventional chromium-nickel austenitic stainless steels such as Type 304. They also offer higher creep, stress-rupture and tensile strength at elevated temperature. The nitrogen in Type 316LN adds additional resistance to sensitization in some circumstances. The nitrogen content of Type 316LN stainless steel also provides some solid solution hardening, raising its minimum specified yield strength compared to Type 316L stainless steel. Like Types 316 and 316L, the Type 316LN alloy also offers good resistance to general corrosion and pitting/crevice corrosion. Please note that we have a minimum order value of £10,000.

Request for a quote

United States

316Ti (UNS S31635) is a titanium stabilised version of 316 molybdenum-bearing austenitic stainless steel. The 316 alloys are more resistant to general corrosion and pitting/crevice corrosion than the conventional chromium-nickel austenitic stainless steels such as 304. They also offer higher creep, stress-rupture and tensile strength at elevated temperature. High carbon Alloy 316 stainless steel can be susceptible to sensitisation, the formation of grain boundary chromium carbides at temperatures between approximately 900 and 1500°F (425 to 815°C) which can result in intergranular corrosion. Resistance to sensitisation is achieved in Alloy 316Ti with titanium additions to stabilise the structure against chromium carbide precipitation, which is the source of sensitisation. This stabilisation is achieved by an intermediate temperature heat treatment, during which the titanium reacts with carbon to form titanium carbides. Please note that we have a minimum order value of £10,000.

Request for a quote

United States

S20910 stainless steel provides a combination of good corrosion resistance and strength not found in any other commercial material available in its price range. This austenitic stainless steel has corrosion resistance greater than that provided by types 316 and 316L, plus approximately twice the yield strength at room temperature in the annealed condition. In addition S20910 stainless steel has very good mechanical properties at both elevated and sub-zero temperatures a well as outstanding cryogenic properties. And, unlike many austenitic stainless steels, 22-13-5 stainless steel can be heavily cold worked to enhance its yield strength and remain non-magnetic. Please note that we have a minimum order value of £10,000.

Request for a quote

United States

Alloys 304 (S30400) and 304L (S30403) stainless steels are variations of the 18 percent chromium – 8 percent nickel austenitic alloy, the most familiar and most frequently used alloy in the stainless steel family. High strength, excellent corrosion resistance and minimized carbon content make Alloy 304 and 304L Stainless Steels useful for applications where welding is required. Uses include architectural mouldings and trim, welded components of chemical, textile, paper, pharmaceutical and chemical industry processing equipment. Other advantages are its resistance to oxidation, excellent formability, ease of fabrication and cleaning, excellent strength to weight ratio and good toughness at cryogenic temperatures. For severely corrosive environments,the lower content of Type 304L is preferred because of its greater immunity to intergranular corrosion. Please note that we have a minimum order value of £10,000.

Request for a quote

United States

Duplex UNS S31803/1.4462 is a duplex stainless steel with approximately 50% ferrite and 50% austenite. This grade has good mechanical strength at room temperature, resistant to corrosive attack, including pitting and is resistant to stress corrosion cracking. The grade is a successful alternative to the normal 300 series austenitic stainless steels, where its higher strength and resistance to stress corrosion cracking is required in critical applications. Please note that we have a minimum order value of £10,000.

Request for a quote

Germany

precision steel tubes EN 10305-1 OD 4 - 210 mm | WT 0,5 - 20 mm EN 10305-2 OD 15 - 130 mm | WT 1 - 10 mm EN 10305-3 OD 15 - 93 mm | WT 1 - 3 mm EN 10305-4 OD 6 - 80 mm | WT 1 - 12,5 mm EN 10305-5 OD 10x10 - 100x100 | WT 1 - 5 mm

Request for a quote

United States

Grade 316 is the standard molybdenum-bearing grade, second in overall volume production to 304 amongst the austenitic stainless steels. The molybdenum gives 316 better overall corrosion resistant properties than Grade 304, particularly higher resistance to pitting and crevice corrosion in chloride environments. Grade 316L, the low carbon version of 316 and has very high immunity from sensitization (grain boundary carbide precipitation). It is extensively used in the oil and gas and chemical industries for its cost effective corrosion resistance and ease of fabrication. There is commonly no appreciable price difference between 316 and 316L stainless steel. The austenitic structure also gives these grades excellent toughness, even down to cryogenic temperatures. Compared to chromium-nickel austenitic stainless steels, 316L stainless steel offers higher creep, stress to rupture and tensile strength at elevated temperatures. Please note that we have a minimum order value of £10,000.

Request for a quote

United States

We deliver precision tubes specially engineered for aerospace engines that perform in the most extreme pressures and temperatures. Trusted by Major Engine OEMs Our aerospace engine tubes are trusted by major OEMs to operate in a variety of critical aircraft engine systems including fuel delivery, fire suppression, thrust reverser, drain lines, and bleed air systems. Please note that we have a minimum order value of £10,000.

Request for a quote

United Kingdom

We offer a comprehensive range of super mirror marine polished stainless steel tube in grade 316 (1.4401). The size range covers tubes from ½” (12.70mm) – 2.1/2” (63.50mm) with a 16 gauge (1.6mm) wall thickness. Suitable for marine environments and high-chloride exposure.

Request for a quote

Turkey

VISHAL STEEL INDIA is a leading worldwide supplier & exporter of Stainless Steel ASTM A312 / A213 / A249 316/316L Stainless Steel Seamless Pipes , Stainless Steel ASTM A312 / A213 / A249 316/316L Stainless Steel Welded Pipes , Stainless Steel ASTM A312 / A213 / A249 316/316L Seamless Pipes etc.

Request for a quote

Request for quotes

Create one request and get multiple quotes form verified suppliers.

  • Only relevant suppliers
  • Data privacy compliant
  • 100% free