Manual valves - Import export

Miniature ball valves and universal ball valves in brass, with 1/8 to 2″ thread or plug-in connection for hose 4 to 8 mm.

Manual slide valves as real shut-off valves, which allow the system to be vented when it is switched off. Available in sizes 1/8 to 1/2″. Other colors such as black or red, as well as special versions with spring return or latching are available on request.

The sliding gate manual valve for low temperature type 8056 in reinforced version is used for cryogenic control applications down to 200°C. Media such as hydrogen, nitrogen, oxygen, carbon dioxide, etc. can be shut off safely and can be controlled excellently, even in the low temperature range.

The sliding gate manual valve type for high temperature type 8053 in reinforced version is suitable for a wide range of process applications up to 530°C. Media such as steam, liquids, gases, etc. can thus be shut off safely and controlled excellently, even in the high temperature range.

The sliding gate manual valve type 8051 in short design is suitable for a wide range of process applications. Media such as steam, liquids, gases, etc. can be shut off safely with low actuating force and can be controlled excellently.

The sliding gate manual valve type 8050 in reinforced design and long construction is suitable for a wide range of process applications. Media such as steam, liquids, gases, etc. can be shut off safely with low actuating force and can be controlled excellently.

The sliding gate manual valve type 8050 in long design with on/off and control operation is suitable for a wide range of process applications. Media such as steam, liquids, gases, etc. can be shut off safely with low actuating force and can be controlled excellently.

The GEMÜ 653 and GEMÜ 654 2/2-way diaphragm valves have a stainless steel operator housing and are manually operated. The valve is available in two versions. GEMÜ 653 has a handwheel in high temperature and chemically resistant plastic. GEMÜ 654 has a stainless steel handwheel. Both types are also available with concealed bolt mounting (design D). An integral optical position indicator is standard. —Handwheel design allows minimal heat sink —CIP/SIP cleaning and sterilising capabilities, autoclave capability —The service life of the diaphragm is increased to a maximum (by the optional seal adjuster) —Stroke limiter available (optional)

The GEMÜ 487 Victoria® soft seated butterfly valve is manually operated. It has a metal hand lever or gearbox according to customer requirements. The butterfly valve is available in nominal sizes DN 25 - 600 and in various body versions such as Wafer, Lug and U section. — Approvals: Drinking water (DVGW, ACS, WRAS, Belgaqua), gas (DVGW) — Low torques — Simple installation — Modular construction — Extensive applications using a variety of materials — Advanced seal design - even for larger diameters — Body coating in accordance with ISO 12944-6 C5-M — Suitable for coastal and offshore areas as well as in buildings with high condensation problems and contamination

The GEMÜ C67 HPW CleanStar ultra pure 2/2-way diaphragm valve is manually operated. All medium wetted parts are made of PVDF or PTFE. —High purity due to cleanroom manufacturing —High Flow version —High flow rates —Minimal deadleg —Optional flow direction —Also available as T valve —The valve is available with ECTFE union nut as an option. Thus you achieve: brief equipment rinsing times, clearly improved Kv values (High Flow), high "MTBF" and reduced costs

The GEMÜ 601, GEMÜ 612 and GEMÜ 673 2/2-way diaphragm valves have a temperature resistant plastic handwheel and are manually operated. The GEMÜ 602 valve has a stainless steel handwheel and is manually operated. Bonnet and internals are made all of stainless steel. A seal adjuster to increase service life of the diaphragm and an integral optical position indicator are included as standard. —Hermetic separation between medium and operator —Optional flow direction and installation position —Long service life of the diaphragm due to patented seal adjuster (US-Pat. 5 377 956) —Valve body also available in multi-port designs (M-block and T-body) or as tank bottom valve body

The GEMÜ 507 2/2-way angle seat globe valve has an ergonomically designed plastic handwheel and is manually operated. The valve spindle is sealed by a self-adjusting gland packing providing low maintenance and reliable valve spindle sealing even after a long service life. A wiper ring fitted in front of the gland packing protects the seal against contamination and damage. A stainless steel bellows and a handwheel extension are available as options (not for operator size 0). —Various valve body connections (threaded sockets, threaded spigots, butt weld spigots) available —High flow rates due to angle seat design —Optionally for contact with foodstuffs as per directive (EC) No. 1935/20041 (K-no. 1935)

Control valves and directional valves clear, block or change the flow direction of the medium used. They control the direction of the volume flow, i.e. the exit direction of a cylinder, and through start-stop commands the travel distance of the stroke. Our product range includes manual, pneumatic and electro-pneumatic actuated valves in 3/2-, 5/2- and 5/3-directional design. Directional valves acc. to NAMUR, supply units, base plates, logistics modules and two-handed safety control valves add to the assortment.

Large selection of manual directional control valves with different actuating elements. With lever at 90° / 45° or on the front. With adapter system for mushroom buttons, push buttons or rotary switches. Available in sizes 1/8 and 1/4 to 3/2, 5/2 and 5/3.

Manually actuated directional valves with a wide range of actuating elements for panel mounting in 84 possible combinations. Whether in 3/2 – 5/2 way, NC or NO function, linear or built in at 90° – You can implement your application with this valve series.

The segment disc manual control valve type 5020 with manual actuator is a perfect choice for on/off and control applications of liquids and vapors, even if they are contaminated by particles.

Throttle valves, check valves, quick exhaust valves, manual slide valves

The hightemperature sliding gate control valve type 8024 in reinforced GS3 design with integrated positioner is suitable for a wide range of process applications up to 530°C. Media such as steam, liquids, gases, etc. can be precisely controlled even in the hightemperature range. Digital positioner type 8049 Pneumatic and electropneumatic positioner type 8047 Positioner with integrated process controller type 8049 IPC Positioner type 8047 and type 8049 also in explosionproof version Positioner with mounting acc. to NAMUR standard Metal bellows Limit switch Position feedback Manual override Pilot valve . . .

electropneumatic initiation via solenoid valve, e.g. 24 V DC electropneumatic pilot release via solenoid valve, e.g. 24 V DC protective cover filterregulatorlubricator to clean and lubricate the supply air manual on/off valve single/double band adaptor for surfacecritical materials telescopic guide for thin wire precision stock guide for thin materials special grippers for plate or profile materials mounting bracket with height adjustment via slotted holes heightadjustable base frames pullthru straighteners for strip and wire electropneumatic initiation via solenoid valve, e.g. 24 V DC electropneumatic pilot release via solenoid valve, e.g. 24 V DC complex electrical control units protective cover filterregulatorlubricator to clean and lubricate the supply air manual on/off valve

High resolution (dead band ± 0.6%) • Robust aluminium housing • Multiple options for adjustment and diagnostics • Metall valve coupling • Manual override • Fail safe feature available

The sliding gate control valve Type 8020 in reinforced GS3 with NAMUR interface for universal positioner assembly is suitable for a wide range of process applications. Media such as steam, liquids, gases, etc. are easy to handle. For high speed and cycling applications this valve is the clear choice. Pneumatic Electropneumatic Digital Without positioner for on/off operation Metal bellows Limit switch Position feedback Manual override Pilot valve . . .

The sliding gate control valve type 8020 with NAMUR interface for universal positioner assembly is suitable for a wide range of process applications. Media such as steam, liquids, gases, etc. are easy to handle. For high speed and cycling applications this valve is the clear choice. Pneumatic Electropneumatic Digital Without positioner for on/off operation Metal bellows Limit switch Position feedback Manual override Pilot valve . . .

Pneumatic right angle valve for high cycle applications and compact installations. In stainless steel suitable for neutral and aggressive media but also for a wide range of temperature applications. Whitworth pipe thread NPT thread Limit switch Pilot valve Manual override . . . Piston actuator of Brass (chrome plated) Stainless steel Polymer Stainless steel diaphragm actuator Low temperature version Degreased version, Silicon or PTFEfree version …

Pneumatic actuated threeway valve for neutral media made from bronze, perfect fit for high cycling applications. Whitworth pipe thread NPT thread Limit switch Pilot valve Manual override . . . Piston actuator of Brass (chrome plated) Stainless steel Polymer Stainless steel diaphragm actuator

The flanged valve with pneumatic actuator and body made of gray cast iron or spheroidal graphite iron in installation length and flange pattern according to DIN. Limit switch Pilot valve Manual override version with pressure relief

electropneumatic initiation via solenoid valve, e.g. 24 V DC electropneumatic pilot release via solenoid valve, e.g. 24 V DC protective cover filterregulatorlubricator to clean and lubricate the supply air manual on/off valve single/double band adaptor for surfacecritical materials telescopic guide for thin wire precision stock guide for thin materials special grippers for plate or profile materials mounting bracket with height adjustment via slotted holes heightadjustable base frames pullthru straighteners for strip and wire electropneumatic initiation via solenoid valve, e.g. 24 V DC electropneumatic pilot release via solenoid valve, e.g. 24 V DC complex electrical control units protective cover filterregulatorlubricator to clean and lubricate the supply air

• THERMO-AW valves are used for the reliable regulation of air,     superheated  steam and flue gas flows. The maximum permitted     temperature may be, depending on design, up to 600°C.  • In order to systematically avoid corrosion problems, we exclusively use     stainless steel alloys to make our THERMO-AW valves. Our standard     working materials are 1.4301, 1.4541 and 1.4571.  • THERMO-AW valves are controlled manually, electrically or pneumatically.     All brands can be used for the drive.  • THERMO-AW valves are metallically sealed and function without any     additional sealing materials.   • The leakage rate is less than 0.1 % (based on the cross-section).     THERMO-AW valevs are 100 % leak-proof against the surrounding area.  • Our construction departement together with our in-house production     allows us to deal with virtually any customer requests.  • Due to systematic standardisation in detail and our long-term experience,     THERMO-AW valves are not prone to malfun