Results for
FERPLAST SNC
Italy
MANUAL LIFTER FOR PALLETS MOD. FPSDJ 1010 - shipped fully assembled! Pallet lifter with hydraulic foot pump and rudder ( for low weight can use the pedal), steel frame with fork tip rounded, directional nylon wheels with brakes and double rollers, fixed width forks. WARNING: all the elevators are shipped pre-assembled, tested one by one before packing in a professional manner and with CE certification.
Request for a quoteFERPLAST SNC
Italy
MANUAL LIFTER FOR PALLETS MOD. FPSDJ 1016 - shipped fully assembled! Pallet lifter with hydraulic foot pump and rudder (for low weight can use the pedal), steel frame with fork tip rounded, directional nylon wheels with brakes and double rollers, fixed width forks. WARNING: all the elevators are shipped pre-assembled, tested one by one before packing in a professional manner and with CE certification. The elevators FPSDJ are very practical and robust, recommended where the paving is smooth (eg warehouses) where the occasional and not continuous lifting of pallets does not justify the purchase of a battery model. The structure and operation are similar to those of a standard pallet truck. You can lift the load both through rudder or pedal. For each pumping the forks are raised about 3 cm. The descent is done by pressing the lever on the rudder. And it is controlled and at a safety speed.
Request for a quoteFERPLAST SNC
Italy
MANUAL LIFTER FOR PALLETS MOD. FPSDJ 1012 - shipped fully assembled! Pallet lifter with hydraulic foot pump and rudder (for low weight can use the pedal), steel frame with fork tip rounded, directional nylon wheels with brakes and double rollers, fixed width forks. WARNING: all the elevators are shipped pre-assembled, tested one by one before packing in a professional manner and with CE certification. The elevators FPSDJ are very practical and robust, recommended where the paving is smooth (eg warehouses) where the occasional and not continuous lifting of pallets does not justify the purchase of a battery model. The structure and operation are similar to those of a standard pallet truck. You can lift the load both through rudder or pedal. For each pumping the forks are raised about 3 cm. The descent is done by pressing the lever on the rudder. And it is controlled and at a safety speed.
Request for a quoteSEMIN
France
TECHNICAL DETAILS Paste coating for a good finish on interior walls and ceilings. Provides excellent surface preparation before painting or hanging coverings. COMPOSITION AND APPEARANCE Emulsion resin, calcium carbonate, rheological agent and various additives. SEMIN ENDUIT DE LISSAGE is a water-based coating. The paste is white in colour. COVERINGS • Wallpaper • Paint • Wall covering SUITABLE SURFACES Interior walls and ceilings • Plasterboards • Plaster tiles • Concrete • Cement coating TECHNICAL CHARACTERISTICS • Density of paste : 1.9 • Granulometry : fine • pH : 7 Adhesion : complies with NFT 30 608 PACK SIZE 4 and 10 kg buckets on shrink-wrapped pallet. APPLICATION Apply manually using a smoothing trowel or a filling knife. The maximum thickness will be 2 mm per coat. Allow to harden and remove imperfections before sanding, if necessary. Print the SEMIN ENDUIT DE LISSAGE if applying satin-finish or gloss paint. Clean tools in water.
Request for a quoteTHOMSON MACHINERY BV
Netherlands
We have established ourselves as a renowned manufacturer, supplier and exporter of quality assured Manual Hydraulic Hand Pallet Truck. These trucks are manufactured using high-grade raw material and advanced machines to remain in tandem with set industry standards and norms. The offered trucks are known for their smooth performance, durability and accurate dimensions.
Request for a quoteFERPLAST SNC
Italy
MANUAL LIFTER FOR PALLETS MOD. FPSDJ 1030 - shipped fully assembled! Pallet lifter with hydraulic foot pump and rudder (for low weight can use the pedal), steel frame with fork tip rounded, directional nylon wheels with brakes and double rollers, fixed width forks. The telescopic structure of the elevator, thanks to the minimum height of the mast of 2080 mm, it allows to pass under the majority of doors and openings. The lifter height of 2080 mm also keeps raising the load to a height of about 15-20 cm.Over 20 cm of lifting, the structure begins to slip and the height of the trolley increases to reach 3.5 meters when the load is raised to 3 meters. WARNING: all the elevators are shipped pre-assembled, tested one by one before packing in a professional manner and with CE certification.
Request for a quoteFERPLAST SNC
Italy
SHORT MANUAL PALLET TRUCK MODEL FPBF25 L800 Structure in drawn steel with rounded fork tips. Hydraulic unit built entirely of steel mounted on high precision thrust bearing. Control lever 3 positions with adjustable lowering speed. Lifting operated rudder and automatic recall upright. Safety valves for hoist limit and overload. Directional wheels aluminum with rubber elastic diameter 200 mm. mounted on ball bearings. Load nylon rollers diameter 82 mm with double ball bearings.
Request for a quoteFERPLAST SNC
Italy
MMANUAL LIFTER FOR PALLETS MOD. FPSDJ 1500 - shipped fully assembled! Pallet lifter with hydraulic foot pump and rudder (for low weight can use the pedal), steel frame with fork tip rounded, directional nylon wheels with brakes and double rollers, fixed width forks. The model FP SDJ 1500 is equipped with double chain for lifting. WARNING: all the elevators are shipped pre-assembled, tested one by one before packing in a professional manner and with CE certification. The elevators FPSDJ are very practical and robust, recommended where the paving is smooth (eg warehouses) where the occasional and not continuous lifting of pallets does not justify the purchase of a battery model. The structure and operation are similar to those of a standard pallet truck. You can lift the load both through rudder or pedal. For each pumping the forks are raised about 3 cm. The descent is done by pressing the lever on the rudder. And it is controlled and at a safety speed.
Request for a quoteFERPLAST SNC
Italy
In Europe,50% pallets are under 300kg weight. To replace hydraulic pallet truck when under 300kg load. Pallets are simply lifted by pulling the handle backwards (the leverage principle). Saves a lot of time as no pumping is required. It differs from standard pallet trucks as completely mechanical and devoid of hydraulic system. Thanks to the low weight, the mechanic lifter can easily be carried to other floors, put into a truck or a car. Foldable.when not in use, it can be hung up on a hook on the wall. No hydraulic pump to repair, no oil can leak out,no seals to replace. Ideal for grocery stores, all kind of small stores, pharmaceutical industry, drugstores, offices, schools, hospitals etc.
Request for a quoteFERPLAST SNC
Italy
MANUAL PALLET TRUCK WITH LOWERED FORKS Special pallet truck with minimum fork height lower than normal pallet trucks. Indispensable for handling non-standard pallets, vending machines, machinery, etc. Available in models: FP SR 10-W 550: pallet truck with minimum fork height of mm. 36 - load 1000 Kg. FP BFL15 W 550: pallet truck with minimum fork height of mm. 52 - load 1500 Kg.
Request for a quoteFERPLAST SNC
Italy
MANUAL PALLET TRUCK LOAD 2200 Kg - forks mm. 1150x525 and mm. 800x525 (short) The hand pallet trucks of the Ferplast FPGS ECO 2200 series, with a load of 2200 kg, are robust and designed for use in industrial environments. They are characterized by: - Structure in drawn sheet steel with rounded fork tips. - Hydraulic unit built in cast iron with integrated oil tank to prevent leaks and rustproof chromed piston - Lifting with drawbar activation and automatic return to vertical position. - Safety valves for lifting and overload limit switches. - Immediate descent release valve - Directional wheels diameter 200 mm, in rubber. - Ergonomic tiller with 2 curves The FPGS ECO 2200 model with fork length mm. 1150 can be equipped with a single loading roller (model FPGS ECO 22/1150-1) or double loading roller (models FPGS ECO 22/1150-2). The loading rollers are made of polyurethane with a diameter of mm. 82 and ball bearings.
Request for a quoteFERPLAST SNC
Italy
LIFTER PALLET TRUCK PANTOGRAPH MOD. FP JF W550 E WITH ELECTRIC LIFTING Pantograph pallet truck lifter with manual push movement and electric lifting with a maximum height of mm. 800. It is normally used in manual palletizing and depalletizing operations to reduce physical effort and speed up operations. It can be used as a normal pallet truck. For the safety of the operator, when the load exceeds 400 mm from the ground, the stabilizers that prevent movement are activated.
Request for a quoteFERPLAST SNC
Italy
Wrapping Machine Mod. FP 15 SE/T with table cut for loading and unloading with pallet, and safety photocell, photocell height sensing pallet, digital panel with 3 programs winding, inverter for soft start, manual lock/cut of the film and automatic wrapping cycle (machine CE). NOTE: the machine is loaded from the side. When ordering, with a surcharge, it is possible to obtain the modification for the front load. UPON REQUEST WE CAN MAKE WITH WRAPPING MACHINES: Rotary table diameter mm. 1800 (pallets up to 1300x1300 mm)Place the pallets (EPAL) using a simple hand pallet truck, attach the film to the base of the pallet, select the wrapping program and press the start button. The machine automatically winding and stops. Cut the film manually. Attention: the pallet must not have the inner crosspieces on the side of the transpallet.
Request for a quoteFERPLAST SNC
Italy
SHORT MANUAL PALLET TRUCK MODEL FPBF25 L950 Structure in drawn steel with rounded fork tips. Hydraulic unit built entirely of steel mounted on high precision thrust bearing. Control lever 3 positions with adjustable lowering speed. Lifting operated rudder and automatic recall upright. Safety valves for hoist limit and overload. Directional wheels aluminum with rubber elastic diameter 200 mm. mounted on ball bearings. Load nylon rollers diameter 82 mm with double ball bearings.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
FERPLAST SNC
Italy
Rotary table diameter mm. 1000 mm. 2400 Capacity: from 1000 kg to 3000 kg Height from the ground: mm. 80 to mm. 500 Turntable with recess for pallet truck insertion. STRETCH FILM FOR MANUAL USE: The film normally used to manually wrap the pallets is 23 my, standard coils from about 5 kg. The white stretch film 30 my, is suitable to protect the contents of the pallets from sunlight. The white film is opaque. Can be used to hide valuable goods during transport. The type of films supplied by us is of premium quality and is suitable to be used on our machines. We recommend using only top quality film in that it significantly reduces packaging waste and problems caused by use of an unsuitable product.
Request for a quoteFERPLAST SNC
Italy
LIFTER PALLET TRUCK PANTOGRAPH MOD. FP JF W550 M WITH MANUAL LIFTING Lifter pallet truck pantograph with maximum lifting height mm. 800. Can be used as a standard transpallet but when the load exceeds 400 mm above the ground, stabilizers come into operation to prevent displacement. It is normally used in the operations of manual palletizing and de-palletizing to reduce physical exertion and increase productivity.
Request for a quoteFERPLAST SNC
Italy
STAINLESS STEEL MANUAL PALLET TRUCK MOD. FPGS25-I - CAPACITY 2500 Kg. The FPGS25-I hand pallet truck is built with an electropolished AISI 304 stainless steel structure and is therefore suitable for use in the food, pharmaceutical or chemical industry or in humid or saline environments. The internal pump is made of brass with excellent resistance to humidity and oxidation. It is a robust and versatile model that is suitable for handling pallets and pallets even with heavy weight. This model is characterized by: - Structure in AISI 304 stainless steel sheet - Hydraulic unit built in cast iron with integrated oil tank to prevent leaks and rustproof chromed piston - Lifting with drawbar activation and automatic return to vertical position. - Safety valves for lifting and overload limit switches. - Control valve for descent proportional to the weight exerted by the load. - Aluminum directional wheels with elastic rubber coating diameter 200 mm mounted on ball bearings.
Request for a quoteFERPLAST SNC
Italy
GALVANIZED MANUAL PALLET TRUCK MOD. FPGS25-G - CAPACITY 2500 Kg. The FGS25-G hand pallet truck is built with a galvanized structure and is therefore suitable for use in the pharmaceutical or chemical industry or in humid or saline environments such as fish markets and fishmongers. The internal pump is made of brass with excellent resistance to humidity and oxidation. This model is characterized by: - Structure in galvanized steel sheet -- Hydraulic unit built in cast iron with integrated oil tank to prevent leaks and rustproof chromed piston - Lifting with drawbar activation and automatic return to vertical position. - Safety valves for lifting and overload limit switches. - Control valve for descent proportional to the weight exerted by the load. - Aluminum directional wheels with elastic rubber coating diameter 200 mm. mounted on ball bearings. - Double nylon loading roller diameter mm.
Request for a quoteFERPLAST SNC
Italy
FP 15 SE STRETCH-WRAPPING MACHINE with electronic board and digital keyboard, inverter to control the progressive start and turntable rotation speed, 4 wrapping programs, electromagnetic clutch for film tension control, photocell for automatic reading of the pallet height, manual hook up/cutting of the film, and automatic wrapping cycle (CE-standard).
Request for a quoteFERPLAST SNC
Italy
MOTORIZED ROTARY TABLE WITH INTEGRATED ELECTRONIC SCALE Motorized rotary table for manual pallet and packs wrapping, mounted on a compact structure in painted steel that can be forklifted with a transpallet. The external electrical panel is equipped with a support stand. The table is fixed on a weighing platform with 4 load cells. Thanks to the integrated scale with weight indicator, it is possible to weigh the pallets or packages in real time before wrapping. TECHNICAL FEATURES WEIGHT INDICATOR 5-key functional waterproof keyboard 25 mm backlit LCD display. with 6 high-contrast digits and icons to indicate active functions IP54 ABS enclosure, easy to clean and resistant in harsh and corrosive environments Suitable for use on table, column or wall Adjustable angle fixing bracket supplied 24 bit A/D converter, 4 channels, max 200 conv./sec. autoselect and up to 8 signal linearization points Max 10,000e or multifield 3 x 3000e at 0.3 µV/d in version
Request for a quoteFERPLAST SNC
Italy
FPGS PRO MANUAL PALLET TRUCK LOAD 2500 Kg The manual pallet trucks of the FPGS PRO 2500 series, with a load of 2500 kg, are professional models, robust and suitable for handling pallets in industrial and logistic environments. They are also characterized by: - Structure in drawn sheet steel with rounded fork tips. - Hydraulic unit built in cast iron with integrated oil tank to prevent leaks and rustproof chromed piston - Lifting with drawbar activation and automatic return to vertical position. - Safety valves for lifting and overload limit switches. - Control valve for descent proportional to the weight exerted by the load. - Directional wheels diameter 200 mm, in polyurethane. - Ergonomic tiller with 3D design for optimal grip The FPGS PRO 2500 models are equipped with a double loading roller but on request they can also be equipped with a single loading roller. The rollers are made of polyurethane with a diameter of mm. 82 and with ball bearings.
Request for a quoteFERPLAST SNC
Italy
FPGS PRO MANUAL QUICK LIFT PALLET TRUCK LOAD 2500 Kg The manual pallet trucks of the FPGS PRO 2500 series, with a load of 2500 kg, are professional models, robust and suitable for handling pallets in industrial and logistic environments. The "Quick Lift" function allows you to lift loads quickly, thanks to the specific hydraulic pump. Two pump strokes allow you to lift loads up to 120 kg from the ground or three pump strokes for loads over 120 kg, compared to 5 pump strokes with a hand pallet truck equipped with a standard pump. Available in the following models: Pallet truck with forks mm 1150x525 with single roller Pallet truck with forks mm 1150x525 with double roller The FPGS PRO 2500 models are equipped with a double or single loading roller. The rollers are made of polyurethane with a diameter of mm. 82 and with ball bearings. Powder coating dried at a temperature of 250 °C to ensure maximum resistance to wear and atmospheric agents.
Request for a quoteFERPLAST SNC
Italy
Place the pallets (EPAL) using a simple hand pallet truck, attach the film to the base of the pallet, select the wrapping program and press the start button.The machine automatically winding and stops. Cut the film manually. Attention: the pallet must not have the inner crosspieces on the side of the transpallet. STRETCH FILM FOR WRAPPING MACHINES: The film normally used on winding machines is 23 my standard in rolls of approximately 16 kg. With 1 roll of film you are able to wrap an average of 60 pallets. The film is also available in white 30 my, suitable to protect the contents of the pallets from sunlight. The white film is opaque and can be used to hide valuable goods during transport. The type of films supplied by us is of premium quality and is suitable to be used on our machines. We recommend using only top quality film in that it significantly reduces packaging waste and failures due to the use of an unsuitable product.
Request for a quoteFERPLAST SNC
Italy
MANUAL LIFTER FOR PALLETS MOD. FPSDJ 1025 - shipped fully assembled! Pallet lifter with hydraulic foot pump and rudder (for low weight can use the pedal), steel frame with fork tip rounded, directional nylon wheels with brakes and double rollers, fixed width forks. The telescopic structure of the elevator with a minimum height 1840 mm allows to pass under doors and openings. The lifter maintains a height of 1840 mm also lifting the load at a height of about 15 cm. Over 15 cm lifting of the load, the structure begins to slip and the height of the trolley increases to reach 3 meters when the load is raised to 2.5 meters. WARNING: all the elevators are shipped pre-assembled, tested one by one before packing in a professional manner and with CE certification.
Request for a quoteFERPLAST SNC
Italy
MANUAL LIFTER FOR PALLETS MOD. FP SDJA 1016 with adjustable forks - shipped fully assembled! Pallet lifter with hydraulic foot pump and rudder (for low weight can use the pedal), steel frame with fork tip rounded, directional nylon wheels with brakes and double rollers, forks with adjustable width. Caution: the front supports have fixed width standard of 570 mm. WARNING: all the elevators are shipped pre-assembled, tested one by one before packing in a professional manner and with CE certification. The elevators FPSDJ are very practical and robust, recommended where the paving is smooth (eg warehouses) where the occasional and not continuous lifting of pallets does not justify the purchase of a battery model. The structure and operation are similar to those of a standard pallet truck. You can lift the load both through rudder or pedal. For each pumping the forks are raised about 3 cm The descent is done by pressing the lever on the rudder.
Request for a quoteFERPLAST SNC
Italy
MANUAL LIFTER FOR PALLETS MOD. FPSDJ 1016 AS with wide structure - shipped fully assembled! Lifts for pallet with hydraulic foot pump and steering or battery operation, steel structure with rounded tip of the forks, directional wheels in nylon with brakes and two front needle roller, fixed forks. (CE certificate). Version with forks width adjustable from 220 to 950 mm and wide frame. WARNING: all the elevators are shipped pre-assembled, tested one by one before packing in a professional manner and with CE certification. The elevators FPSDJ are very practical and robust, recommended where the paving is smooth (eg warehouses) where the occasional and not continuous lifting of pallets does not justify the purchase of a battery model. The structure and operation are similar to those of a standard pallet truck. You can lift the load both through rudder or pedal. For each pumping the forks are raised about 3 cm. The descent is done by pressing the lever on the rudder.
Request for a quoteResults for
Manual pallet - Import exportNumber of results
48 ProductsCountries
Company type
Category