Management system - Import export

A company with a global presence cannot operate without paying the utmost attention to the safety of its staff and visitors, the protection of the environment and the sustainability of the entire manufacturing process. The focus on health, safety and the environment has always been and will always be a priority within our company. Activities such as risk assessment, measuring HSE performance, etc. are routine for us. In 2019, M.E.G.A. S.p.A. received ISO 140012015 certification for its environmental management system.

With unique design, our aluminum dross recycling system manage the hot dross very effectively , the oxidation and metal loss will be terminated in a very short time, in-house metal recovery could be 70-80%, much higher than any other solutions.

Compact Rail Plus linear guides feature double row ball bearings for higher load capacities and rigid rails with convex raceways and new robust steel sliders with longitudinal protection and floating wipers, Compact Rail Plus has been designed for the most demanding applications in terms of high load capacities, high dynamics and work environment. All while maintaining the self-aligning capabilities that make this product family unique. Sliders are available in four versions: guiding slider (RV); floating slider (RP); extra-floating slider (RU) and rotating slider (RA). Combining two rails with different sliders makes it possible to create self-aligning systems that can compensate misalignment errors on two planes: axial up to 3.5 mm and radial up ±1.3°.

MVS 2M is a multichannel system allowing to distribute two, three or four channels of fluids and signals to a gas monitoring system (GMS).

The PURIMAR System has been designed and manufactured to meet IMO's requirements for Ballast Water Management System. At ballasting, the ballast water treatment process performed bt the PURIMAR System comprises two main unit operations : 1. mechanical separation(filtering) and 2. disinfection(electrolysis based chlorination). In the first step, the filter(50㎛ filter fineness) removes particles, sediments and organisms of the large size classes. 1. Convenient maintenance and repair · Modulated system · Easy maintenance and repair by crew/engineer · Global support and worldwide customer service network 2. Automation operation · Feedback control system of each unit equipment and HMI(Human machine Interface) · Automatic and manual operation · Automatic TRC (Treatment Rated Capacity) control Our Company S&SYS Co.,Ltd S&SYS has been established as a spin off the Machinery & Electric System team of the Samsung Heavy Industries on September 1, 2017.

Stainless Steel Cable Ladder Sets the industry standard for cable support systems worldwide. It has an unique combination of high strength, flexibility and lightweight design. Designed for maximum carrying strength in its class, high resistance to impact and environmental factors.

Building an effective measuring and test equipment management system can be challenging, e.g. for companies in the early stages or in need to rebuild their system from scratch. However, good planning and implementation of the set-up are crucial to ensure that measuring and testing equipment works reliably and precisely and thus the quality of your products or services is assured. We support you in implementing an effective system right from the start. We work closely with you to understand your requirements and goals and then develop a bespoke concept tailored to your specific needs. Our experienced team supports you in the selection and procurement of suitable measuring and testing equipment and takes care of the complete documentation of the entire process. We ensure that your system complies with applicable standards and that your employees can use and maintain the system effectively. That ensures reliable and accurate measurements, thus helping to improve your product quality.

Streamline your operations by incorporating the advantages of GemOne into your workflow, enhancing fleet efficiency. Seamlessly connect your rental software or ERP with automatic notifications to schedule periodic maintenance. Our seasoned team is prepared to work alongside you in integrating GemOne with your current company systems. Whether you have a dedicated IT team or wish to expand your integrated platform independently, we guide you in the right direction.

Powerful software for the operation, supervision and control of manual batching and weighing processes. - Designed to support all industrial andlaboratory scales - System for single and multiple locations - Transparent reporting of the entire recipe process - Touch screen optimized for production area interfaces - Supplied with integrated functions for production, lot consumption, weighing reports and recipe mixing - Fully Microsoft Windows® 7 compatible

PASCHAL Ident technology provides a unique electronic number to every formwork element,quite similar to a human fingerprint. Through this process, one is guaranteed with unmistakable and unique identification which is a pre-requisite for credit processes or for leasing. RFID technology has three essential components - the reader, the transponder(a computer chip with an antenna and casing) and the software that is associated with the reader. Data associated with the formwork element is transmitted online from the reader to the PC, or directly to the online portal.

EUROLINIA offers custom designed control systems from small single heater controls to large multi-zone systems for reliable, economical, and efficient heater performance to ensure precise process temperature control. Some clients, in order to cut costs, underestimate the importance of using appropriate control systems and, as a result, cannot get effective uniform heating and desired quality of the final product. When we develop a control unit for our infrared heating system – we guarantee that the final product will meet all requirements and expectations.

At AMETEK Specialty Metal Products we produce high purity nickel-iron alloy strips, which are primarily used for reed switch systems. These products are widely used in the automotive market for BMS (Battery Management Systems), improved safety in proximity sensors, and cable harness testing. Alloys Our strips are produced using nickel-iron compositions, making sure to use source metals with market leading low levels of trace elements. Alloys include: Nickel-Iron compositions from 36% to 65% Nickel. Sizes Strip thicknesses down to 0.002” (0.0508mm) and wire diameters as small as 0.005” (0.127mm). Applications Finished nickel-iron alloy reed switch systems are used within a multitude of products and devices, mainly being used in the Automotive and Electronics industries. Automotive: BMS (Battery Management Systems), automatic braking assists, door sensors and speedometers.

Manager IQ Easy: the heart of the IQ Easy Platform Manager IQ Easy Introducing a new level of static control; the heart of the new IQ Easy platform is the Manager IQ Easy. It comprises of a Control unit with a 7'' LCD touch screen, provides information from all the connected devices and makes it easy to change and monitor status and parameters. Up to 6 IQ devices can be directly connected to the Manager IQ Easy. The 24V DC power distribution is routed via the Manager, so no extra cables! This makes the connection of a device even easier than connection to a single desktop power supply. The Manager IQ is available in 2 versions: 1) Input voltage 100 - 240V /50-60 Hz This unit converts the input voltage to 24V DC and provides power to all 6 ­connected devices. 2) Input voltage 24V DC This model needs a 24V power input provided by the user. Further extension of devices is possible using the Extension IQ Easy. This adds ­another 6 devices to the system with a maximum of 30.

The iNOEX Data Manager (iDM) comprises a central data logger for the collection of all process and quality data of the iNOEX systems in the extrusion line. Optimization potentials can be identified, and product-specific key figures can be analyzed and evaluated. The software is installed as a virtual machine in the customer's network, so that no additional hardware is required. OPC-UA as a standardized process data interface, integrated with the latest measurement, control and automation solutions from iNOEX, transfers the data. A connection of legacy systems via the iDM gateway is also possible. By using the Grafana software, iDM 4.0 allows graphs, visualizations and data analysis, data export as .csv or .xls, live data on the database server, use as a hall monitor, as well as ready-made and freely configurable dashboards and reports for each connected system.

The Welding 4.0 quality management system ewm Xnet was specifically developed for the welding production and effectively supports all the employees involved in the welding process (welding coordinator, welder, production manager, manager, etc.). The services provided by ewm Xnet include, on the one hand, the monitoring and the documentation of all welding parameters from any number of networked welding machines. On the other hand, it creates and manages the welding documentation (WPQR, WPS, welding certificates) digitally and opens up numerous evaluation options. Additionally, the Xnet welding management system can take over the management of components including all the information associated with it, such as component identification via bar code, material consumption, welding parameters, etc. Thanks to the modular structure, the Xnet welding management system can be used in small, medium and large companies.

NORISYNC 4 is our new power management system (PMS) and optimises the generation and use of electricity. Core of the system is the new power management controller NORISYS 4 PMC. It is based on our open automation platform NORISYS 4 that was especially developed to automate marine applications. As a customised solution, NORISYNC 4 efficiently manage the power distribution, load depending start and stops of diesel generators, the load sharing, synchronising the generator set power and also the use of the energy storage system (ESS) of hybrid and fully electric propulsion systems. CPU based multi-master system for flexible system scalability Safety through redundant communication Different operation modes Easy system configuration Intelligent control of energy storage systems Standardised interfaces to higher level systems Remote access for maintenance and service Approvals in preparation: BV, DNV-GL, LR

An engine oil pressure switch is used to maintain power to the engine, and the vehicle, once the engine has started. When the engine is cranking, power is being supplied through the starter circuits. However, once the engine is running, and the oil pressure is up, power is routed through the oil pressure switch and sensor unit. This is done to ensure the engine is not run without oil. If the sensor does not read the right pressure, the switch will not close, and the vehicle will not stay running. The pressure switch is generally place or fitted around the Engine Oil filter as the oil line has to pass through the filter to be filtered during its continuos cycle of use.

The Advance EnergyManager is a tried and tested design with an internal heat exchanger and shunt pump arrangement resulting in delivery of hot water equivalent to the volume of the tank at 43ºC. It works on the thermal store principle of storing primary (central heating) water and delivering mains pressure hot water through a heat exchanger. The shunt pump is pre fitted and wired to activate when taps or showers are turned on. The EnergyManager comes as shown above with wiring centre for installers to complete the wiring for the rest of the system. Full instructions for wiring the total system are included. At 65ºC operation the EnergyManager is perfect for underfloor or low temperature radiator circuits and offers efficiencies due to the temperature being lower than most thermal stores. It delivers hot water equivalent to the capacity of the store.

Build and manage your own content structure, customize it according to your needs and goals. Cinema8 allows you to store your videos in cloud with its superior storage feature. With its Akamai CDN infrastructure, you can deliver your videos to your users quickly and safely. It is also possible to transfer videos from the alternative video platforms to the Cinema8 library. If you want, you can integrate your Kaltura, Brightcove, Mediannova, Vimeo or YouTube account to Cinema8 account and transfer your videos from these platforms to your video library in Cinema8. Cinema8 also developed its own video publishing platform and Tube. With Cinema8 Tube, you can create your own channels, share the interactive videos you have previously prepared on these channels, create playlists and share them with your audience.

Machine vision tools and barcode reading systems produce a lot of insight-rich data across manufacturing and logistics facilities. The expansion of Industry 4.0 through the Industrial Internet of Things (IIoT) focuses on improving operations by collecting and analyzing data in an efficient way like at “the edge” of the production line as opposed to sending data to the cloud and back. The Cognex Edge Intelligence (EI) platform transforms big data into smart data and provides real-time system performance monitoring and device management to improve overall equipment effectiveness (OEE) and throughput. EI device setup is fast and simple for both new and existing automation lines, preventing downtime and boosting productivity for your operation. Easily connect to the EI platform through any web browser to start collecting data right away. Additionally, users can configure and manage several devices at once.

HeatingSave is an off-the-shelf integrated web and mobile based Building Energy Management System that allows users to cut their energy bills by typically between 20% to 30%+ (see the case studies) and manage their buildings infrastructure and security from one system

The Unicraft platform is a contemporary Learning Management System for training employees which has state-of-the-art UX/UI and is easy and comfortable to use. The Univraft platform allows the employer: - To structure the knowledge, experience, know-how and work technologies of the company in a single knowledge base - To appoint personal training programs and perform flexible control of access to the existing materials - To train each employee to property perform their functions using the most effective instruments and training methods - To control the understanding of the material by each employee on a real time basis - To keep the whole training and competence development history regarding each employee - To analyze the results of the employees’ training, to reveal and award the best ones - To quickly spread new knowledge in the company and to keep the technologies of the company current - 24/7 access from any gadget: to have 24/7 access to the training system using any gadgets.

What is the Grassfish DS Manager PRO: Grassfish's end-to-end digital signage solution runs on robust and reliable digital signage software, supporting dynamic content controlled by intelligent real-time rules, and suitable for use with all major device technologies and operating systems. The award-winning Grassfish Content Management System makes it easy to manage your digital signage network. Best For: Retailers and brands in sectors such as fashion, automotive, banking, grocery, hospitality and travel use our flexible digital signage software to increase store profitability and customer engagement. Product Differentiators: Digital Signage software supports the sales process with real-time customizable content: offering out-of-the-box functionality, so you can deliver engaging, targeted messaging and interaction for customers.

XTM Cloud is the world’s leading cloud-based enterprise translation management solution (TMS) with an integrated computer-aided translation (CAT) tool. It is designed to be scalable, flexible, and agile, with industry open standards at its core. Focused on streamlining complex localization processes and supply chains, XTM centralises TM assets for real-time collaboration, maximising translation reuse. The system incorporates in-context WYSIWYG reviews, localisation quality assessment tests, alternative translations for transcreation, a mobile app for project managers, and a host of other features to meet specific industry requirements. Integrated with other systems, XTM improves efficiency by using either a selection of plug and play connectors for leading CMSs or by utilising the complete web service API. The optional inclusion of MT makes XTM an ideal platform for MT post-editing. For more information about XTM Cloud Translation Management System or a free trial go to www.xtm.

NEXIO is a result of a whole new philosophy in design and development of Casino Management System (CMS). It is advanced CMS platform, delivering ultimate user experience across all system modules. From Slots to Tables, from simple tasks to the most complex analytics or marketing campaigns, user can immediately obtain benefits from a whole new level of product. NEXIO means faster, wider and deeper comprehension of all CMS data with access from virtually everywhere. As a unique and all-in-one CMS casino and players too benefits with a total integration of all games, slot machines, table games, and some third party hardware and software. NEXIO is more than just a suit of products. Supported modules are: Accounting & Cage, Ticketing, Jackpots, Player Tracking, Cashless, Multisite. Nexio is certified and meets requirements of most demanding casino jurisdictions

Clock PMS is an all-round cloud hotel management system that features smooth front office operations, booking engine, channel manager, restaurant POS and unique digital guest portal for self online check-in/out, room service and other advanced services. Clock Software pioneers the replacement of fragmented software infrastructure in hotels with this end-to-end digital platform that covers front desk, housekeeping, CRS for hotel groups, bookings and distribution, real-time synchronisation of rates and availability, guest and company profiles, events and function rooms planner and many more. 30 days free trial available.

Multiple lines of business unified in a single solution A hybrid system for both Fleet (B2B) and Retail (B2C) Traditional boundaries are fading... captives offer full service lease to small and medium businesses while leasing companies launch private lease for retail customers. You can avoid the pitfalls of managing a mixed retail/fleet portfolio: Miles manages both contract types on one system with diversified processes where needed (credit check / onboarding, billing / collections . Total product flexibility Manage any type of contract: traditional leasing contracts including services finance contracts maintenance contracts short term contracts mobility budget contracts ... One system, multiple devices Delivered to back-office users through a smart and modern looking Rich Internet Application User Interface Delivered to front office users (Retail: salesmen, brokers / Fleet: Fleet Managers & Drivers) through Miles Web portal sites ...

The Cloud Platform for your Digital Projects It's the modern way to manage content or data - control everything from a single hub. Publish or distribute to any web channel or app. It's more than a content management system. Contit is an API-first platform. A single modern and fast HUB to manage contents or data and distribute them on any digital channel.

Tailor-made Consultancy to implement the Quality Management Systems Standard ISO 9001:2015