Maintenance parts - Import export

As part of our maintenance and repair services, we also perform technical upgrading and modernisation operations on existing electrical equipment.

As part of our maintenance and repair services, our teams can manage the technical upgrading and renewal of your existing pneumatic and hydraulic controls.

WIWOX® Spintec top loader spray chamber washing systems are the solution for fast parts cleaning in maintenance! The parts to be cleaned are placed in the washing basket of the system from above. During the washing process, cleaning fluid is sprayed onto the parts from below, above and from the sides. The basket rotates inside the machine, resulting in an even washing result. The detergent reservoir is located in the bottom of the machine and is also equipped with a heater.

The most popular and effective way for the Coanda Screen, also called hydropower screen, is using it for the Hydroelectric Plants – Hydropower energy. Coanda Water Screen prevents harmful materials, sediment in the intake process, and provides clean water. Thus, turbine blades in hydropower plants can operate for longer without being damaged. Thus, the Coanda Intake Screen operates long years with negligible maintenance and with no moving parts. Main advantages of Coanda Effect Screen in hydropower plants: - Sustainable energy production and increased output efficiency - Self-cleaning and no power requirement - Increased income with continuous water intake - Durable protection bars and negligible maintenance - Specialised design for high water intaking performance - Protection of turbine blades from abrasion, sediment and debris We are able to improve your electric generation efficiency with our high capacity Coanda Sieb Screen.

ASCO CO2 Transfer Pumps have steel housings and long life shaft seals. The pumps have hardened steel gears and thrust washers to give long service life. The mechanical seal fitted provides leak free operation. These economical pumps need no lubrication and no daytoday maintenance. A unique design allows parts to adjust automatically for wear. Highest efficiency is maintained for a very long time. Installation is simple as no chain or belt drives or gear reduction motors are required. Pumps can be directly connected to standard speed lowcost electric motors. By simply changing the shaft rotation, pumps can be used to pump in or out through the same piping.

Like all machine sizes in our C series, the C5E is also equipped with optimum wear protection. This reduces maintenance costs, as only wear parts need to be replaced. At the same time, this ensures a longer service life and high machine availability. The Flottweg features Recuvane® and Simp Drive® make the simple, efficient and individual operation of the centrifuge perfect.

Grease lubrication of all important parts Maintenance of mechanical and industrial machines Advantages and benefits Long and strong hand lever with plastic grip Grease press barrel smooth and without internal profiling Stable grip at the plunger rod that prevents bruising Grease press barrel and rear cover form a unit (in order to prevent accidents) Limit stop for the plunger rod Mounting of firm nozzle tubes easily possible Suitable for grease up to NLGI 3

AViTEQ parts conveyors for ordered arranging, individualizing and conveying are used in every case where mass parts have to be supplied to a magazine, a machine or to installation equipment, item for item, with a pre-determined orientation and time. Advantages and benefits High level of conveying capacity with compact dimensions operationally safe in continuous employment synchronized two-mass vibration system no influencing of the vibration characteristics through the weight of the parts being conveyed maintenance-free drive conformity with all EC Guideline which affect the drives also available for explosion-endangered spaces (Ex), as well as for 60 Hz power systems and other mains voltages Bowl and drive selection The normal shape of the bowls is cylindrical, in certain cases also cone or step-shaped. Such a bowl is selected if parts tend to become jammed between spiral paths located over one another. The selection of the pot diameter depends of the size of the parts to be conveye

AViTEQ parts conveyors for ordered arranging, individualizing and conveying are used in every case where mass parts have to be supplied to a magazine, a machine or to installation equipment, item for item, with a pre-determined orientation and time. Advantages and benefits High level of conveying capacity with compact dimensions operationally safe in continuous employment synchronized two-mass vibration system no influencing of the vibration characteristics through the weight of the parts being conveyed maintenance-free drive conformity with all EC Guideline which affect the drives also available for explosion-endangered spaces (Ex), as well as for 60 Hz power systems and other mains voltages Construction and operation mode AViTEQ Parts conveyors are two-mass vibration systems, which are synchronized to be close to resonant condition. The drive part includes the elements for vibration generation, such as electromagnet and leaf spring packages. The arrangement of the simple leaf sprin

ELKON pan mixers are preferred all over the world due to their easy and cost-effective maintenance, simple operation and batching performance. From 0,25 m³ to 3 m³ vibrated concrete per batch capacity pan mixers are available in ELKON product range. Advanced Features of ELKON Pan Mixers High batching performance Easy operation and maintenance High homogeneity even with short mixing time Highly wear-resistant mixer wear parts Easy maintenance due to wide maintenance gates and bolted type replaceable linings Low maintenance cost

ELKON planetary mixers are designed to perform high mixing performance even for the challenging applications and mostly preferred for producing precast concrete products such as low or zero slump precast concrete, fiber reinforced concrete, self-compacting concrete, etc. They provide the highest homogeneous mixture even in shorter mixing time as the mixer turret is rotating around the mixer center point and in the meantime mixing stars connected to this turret are circumvolving. Advanced Features of ELKON Planetary Mixers High mixing performance even for challenging concrete applications High mixture homogeneity in shorter mixing time High wear-resistant mixer wearing parts Easy maintenance due to wide maintenance gates and bolted type replaceable linings Italian gearbox (COBRA) Low maintenance cost

ELKON twin shaft mixers, which successfully produce concrete for various projects all around the world, has been manufacturing in ELKON’s technological factories for long time. ELKON is capable of producing 500 twin shaft mixers per shift annually thanks to its fully automated robotic welding lines. Advanced Features of ELKON Twin Shaft Mixers - Longer lifetime with robust mixer body manufactured by fully automatic welding robots - Able to produce of all kinds of concrete (Ready-mixed concrete, precast concrete, roller-compacted concrete-RCC, heavy concrete, etc.) - High homogeneity even in shorter mixing times - Highly wear-resistant, durable wearing parts - Easy maintenance due to wide maintenance gates and bolted type replaceable linings - Heavy duty gearbox (Brevini or Bonfiglioli from Italy) - Automatic lubrication system (Lincoln - Germany) - Universal compatibility to existing concrete plants with compact design

The ViscoDuo-VM 2-component dispenser is a valveless dosing system for static mixing based on the proven progressive cavity technology and thanks to its purely volumetric precise dosing principle, is ideally suited for high-precision dosing tasks. Built according to modular structure, a configuration of the 2-component dosing systems as well as maintenance and part exchange at module level is possible. The material components are mixed downstream of the mixing head only in the mixing tube to prevent material hardening in the system components of the mixing head. Your advantages: - repeatable dosing volume even with viscosity and density fluctuations - Processing of low to high viscosity materials with low to very high filler content - Dispenser and mixing head segments can be combined in size due to modularity - standard equipment with dead space-free integrated dosing pressure sensors for online process monitoring - simple assembly/disassembly of the components

Working range Blind rivets up to 7.7 mm Ø all materials Technical data Weight: 1.85 kg Total length: 570 mm Stroke: 10 mm Accessories Nosepieces: 16/26 BT, 16/32 BT, 16/42 BT and 16/48 BT Spent mandrel container Maintenance instructions with spare parts list Jaws (3 parts): HN 2 BT

Working range Blind rivets from 3.0 to 6.4 mm Ø all materials, except PolyGrip® blind rivets with 6.4 mm Ø made of stainless steel and G-Bulb® blind rivets Technical data Weight: 1.85 kg Total length: 570 mm Stroke: 10 mm Accessories Nosepieces: 16/29, 16/32, 16/36, 16/40 and 16/45 Spent mandrel container Maintenance instructions with spare parts list Jaws (3 parts)

Working range Blind rivets up to 4 mm Ø all materials. Not suitable for stainless steel CAP® blind rivets. Technical data Weight: 1.2 kg Operating air pressure: 6 bar Air hose connection: 6 mm Ø (1/4’’) Air consumption: 0.8-1.2 ltr. per rivet (0,2 ltr. compr. air) Traction power: 5.200 N at 5 bar Stroke: 15 mm Nosepieces/accessories Nosepieces: 16/18, 16/24, 16/27 and 16/29 1 set of jaws, 1 spent mandrel bottle, 1 wrench each of MSU and MSZ, Maintenance instructions with spare parts list Features • Hydraulic head in aluminium with wear-proof cylinder surface • Pneumatic cylinder made of die cast aluminium • The piston made of hardened and hard chromium plated steel make the device easy to handle and wear-proof • Compact seals are wear-proof for a long service life • Fast venting valve for fast return and high working sequence • Low-noise pneumatic switching • Simple, low-interruption valve design • Hydraulic head can be adjusted by 360°

Working range Blind rivet nuts from M3* up to M6 alu and up to M5 steel, brass and stainless steel Technical data Weight: 600 g Total length: 260 mm Stroke: 7 mm Accessories Standard: Threaded mandrel and nosepiece M5 (optional also with M4 or M6) Maintenance instructions with spare parts list Stroke table Features • Simple lift setting via a knurled nut for safe and complete setting of the blind rivet nuts • Threaded mandrel protection via spring ring for fast tool-free replacement of the threaded mandrel • With opening spring for simple handling • Body in high-quality die cast aluminium • Body head made of forged chrome-vanadium steel • Ergonomic handles

Vacuum-packed car parts are protected against external factors: dust, moisture, mechanical shocks, being transported and stored safely. A wide range of car parts, car accessories, maintenance products, etc. can be vacuum packed. We can offer a wide range of packaging solutions and packaging for car parts. We recommend that you consult with our sales team, who can provide you with all the information you need to choose the most suitable equipment and packaging for your business.

Easy and, versatile units, petrol engine driven, with compact dimensions and reduced weight. High manoeuvrability and ease of transport. Full and smooth accessibility to all parts for maintenance. Reduced operational costs. Can operate a small jackhammer, air tools and be used in operations like piping, optic fiber laying, etc. Ideal for small maintenance, vehicle maintenance, road maintenance. Compact design, extremely manoeuvrable Easy to transport, lift and load Outstanding accessibility for maintenance Reduced operation costs Honda Stage V engine Automatic depressurisation at end of cycle Models for Europe, USA (EPA-CARB verified), World

Smart tools have built-in chips, sensors and detectors to identify important maintenance data. Sensor-equipped tools allow the buyer to measure and control various parameters such as: - Wear control of cutting blades - Forming forces - Cutting forces - The resultant of forces on the press - Number of pieces - Move and waste control - Control of key dimensions of the end product - Pressure control - Control of the injection of screws, nuts and other elements Tool chipping In order to achieve higher cost effectiveness of maintenance, we equip replaceable tool parts with RFID chips. The data that the buyer reads with the RFID reader is transmitted from the server of EMO Orodjarna. In this way, the buyer can read with the RFID reader all the necessary information required to produce or order a new position at EMO Orodjarna. Virtualization of tools Enhanced reality and virtualization technology enables greater reliability and repeatability of the work process for the buyer.

This machine opens cans of any type, having a can height between 50mm and 270mm. It is entirely made of stainless steel. Maintenance of the most exposed parts (blades and gears) is simple – there is no need for qualified staff. Cutting and opening of the can is done in a single movement using the same lever. Magnetic fittings keep the cover in place.

This machine opens cans of any type, having a can height between 50mm and 270mm (other dimensions available on request). It is entirely made of stainless steel. Maintenance of the most exposed parts (blades and gears) is simple – there is no need for qualified staff. Cutting and opening of the can is carried out in a single movement using the same lever. Magnetic fittings keep the cover in place. Electric motor 220V monophase 50Hz (380V 50Hz triphase, available on request)

Our services also include the repair of plastic parts and their replacement if necessary, spare parts and guards for various types of industrial machinery. We have the necessary machinery to produce industrial spare parts for any field. 

EleCylinder are electric cylinders with motor, encoder and integrated controller. These energy-saving actuators are extremely easy to use and operation via data input requires no complicated programming. Start and end points can be set to any position. Due to the high-speed movements, EleCylinders are ideally suited for short cycle times. Unlike pneumatic cylinders, they can also perform slow uniform speeds over the entire stroke. Even gentle starting or braking are no longer a problem. EleCylinder are repairable easily and have only a few maintenance parts.

Siga Filtration self-cleaning filters provide continuous filtration of low and medium viscosity liquids and have very low maintenance requirements. The KSF Series self-cleaning filters do not require backflushing which results in less fluid waste, zero interruption, and fewer maintenance parts. Applications include filtration of low to medium viscosity liquids in water, wastewater, inks, paint, varnishes, oils, and food products.

Maintenance is the key to long-term profitability. We provide a worldwide service to ensure optimum availability of the customer’s plant. Our machines are built for life and will serve you faithfully for many decades if they are taken care of properly. ANDRITZ Kaiser offers you service and maintenance in order to ensure optimum availability of your punching and metal forming production lines. Our know-how secures your plant's availability, optimum production, and longer useful life. All services are provided from our site in Bretten (repair work and spare parts, inspections, maintenance and environmental compatibility testing, as well as rebuilds and modernization, including training). Our machines are built for life and will serve you faithfully for many decades if they are taken care of properly. ANDRITZ Kaiser offers you service and maintenance in order to ensure optimum availability of your punching and metal forming production lines. Our know-how secures your plant's...

These winches are used for both hoisting and pulling of loads. They are equipped with a cable drum free spool, making it possible for the cable to be easily pulled from the drum, due to the fact that the cable drum can be detached from the transmission. As well as this, these winches can be mounted in such a way that allows for the cable to come free from the winch horizontally. The Gebuwin range of hand driven spur gear winches are known for their robust construction. The listed capacities refer to the hoisting capacities which are calculated according to the first cable layer on the cable drum. In the case of these winches being used for the pulling of loads, the hoisting capacity should be multiplied roughly by a factor of 2.5. The spur gear winches are equipped with a load pressure brake. This brake holds the load at any required height during hoisting and lowering. The cranks can be adjusted in length and are recoil-free. All rotating parts run in maintenance free bearings....

Halogen-free junction box with pre-mounted, soft plug-in seals, approved for maintaining electrical functionality according to DIN 4102 Part 12. Maintenance of electrical functionality to classes E30 to E90. Colour: Pastel orange. Including pre-mounted connection unit made of high temperature-resistant special ceramic and labelled protective conductor terminal. Supplied with fuse holder TE-FH 520 for VDE-conformant, reaction-free protection of consumers and 2 fire protection screw ties MMS 6x50 for anchorless fastening. Power cable nominal cross-sections: 1.5 to 10 mm² depending on the type, data cables with 0.8 mm wire Ø. Several rigid copper wires with smaller cross-sections per terminal possible. High protection rating IP66, impact resistance class IK08. Details on the cable types and manufacturers can be found in the general construction test certificate of the material testing institute NRW, Erwitte.

ANDRITZ Kaiser produces highly precise presses for the metal forming industry, thus increasing productivity, quality, and lifetime and decreasing overall operating costs. ANDRITZ Kaiser has delivered more than 8,000 presses for numerous customers world wide, each different in its application. A large number of factors have to be taken into account when deciding on the right press: technical requirements from the product, expected productivity, technical requirements on the press line, integration into the existing production lines, fixed and running costs, process control, fast availability of maintenance/service, availability of spare parts – all these considerations influence mainly the total cost of ownership. Our press solutions are: Conventional high speed presses from 630 kN up to 4,000 kN Conventional stamping and deep drawing presses from 1,000 kN up to 8,000 kN Cutting presses from 1,600 kN up to 6,300 kN Heavy presses from 10,000 kN up to 25,000 kN Servo presses from...