Maintenance of it systems - Import export

Our e-maintenance system is registered to meet the needs of users. The e-maintenance system, which has been refreshed, renewed and perhaps redefined as a result of users' desire for better, can be seen as a natural result of creativity and complying with the requirements of the age with the new methods it uses, wanting to access information in the most accurate and fastest way. It is used only by sharing educational materials on the internet, via e-mails or platforms. It will be possible to draw them into the education and make them a part of it with the auditory and interactive way of expression. We will be able to better convey and guide our customers about our targeted product features, maintenance and repairs in case of malfunctions, with simple games created in the videos.

UMHS series Horizontal Screens show the innovative aspect of UĞURMAK. It provides high performance, even in the most demanding applications, and demonstrates its quality and reliability. It shows high efficiency compared to traditional horizontal screens making linear motion. With this design, the timing system eliminates the need for difficult maintenance equipment such as the gear system.

Fine bubble aeration system for lagoons & large surface area ponds. HDPE Floating Feed pipe sized to provide the required air flow Air supply pipe to difusers Aquatube 70 type Tubular Diffusers Stainless Steel Diffuser Feed Section Concrete ballast to stabilise the diffuser assembly Cost-effective solution Low maintenance Specific modular system Adaptable to any lagoon or large pond Low maintenance requirements Very reliable system easy to install and operate Very competitive design and scope of supply Significant mixing of the total volume within the lagoon The active biomass is aerated effectively and efficiently.

The main task of helical oil separators is to separate the high volume of oil coming from the discharge of compressor and return it in the most effective and efficient way. It is to increase the efficiency of the system by minimizing the excess oil rate that may occur. Helical oil separators are also suitable for multiple systems. Using the flator system to ensure high performance by closing the oil return line when there is not enough oil volume in the oil seperator. By having the flange type connection model, it can be cleaned during the system maintenance. Using special materials (stainless steel and brass), flawless and long life-span design. PROPERTIES: It has a working pressure of 45, Flator system providing high performance, Compatibilty with Group I (Ashrae 34 A2L, A2) and Group II (Ashrae 34 A1) refrigerants

ESSOSFF Series Oil Seperators are designed to seperate the mixture of the oil and refrigerant which caused by the compressors’ discharge. By the return of the discharged oil to the compressor, the life-span of the compressor and system is extended. Using the flator system to ensure high performance by closing the oil return line when there is not enough oil volume in the oil seperator. By having the flange type connection model, it can be cleaned during the system maintenance. Using special materials (stainless steel and brass), flawless and long life-span design. ESSOSFF Series Oil Seperators are designed with Solder type connections as a standart. The oil return connection is SAE 1/4″. PROPERTIES: Having special design, long life-span without any problems, Flator system providing high performance, Compatibilty with Group I (Ashrae 34 A2L, A2) and Group II (Ashrae 34 A1) refrigerants

Versatile multi-axis system designed for feeding machine stations. The Y axis can be realized with a rack and pinion driving system for multiple independent carriages or with a short belt system for connected Z axes. The motion systems can be designed with recirculating ball guides or with bearings depending on loads, dynamics, and different environments. LOAD CAPACITY ACCORDING TO DYNAMICS Reported data must be verified according to the application. Please get in touch with our technical department for more information.

Versatile transfer system for metal sheet handling, designed as the main element in a series of presses which eventually combine with load/unload systems. The system features high positioning precision with heavy duty cycles and high dynamics, and is also available for very extended lengths. It manages cantilever loads to keep one side of the series free for operations. The system is driven by a belt with Ω transmission. The Z axes can be placed at different distances, according to the loads. LOAD CAPACITY ACCORDING TO DYNAMICS Reported data must be verified according to the application. Please get in touch with our technical department for more information.

A hinged hidden double sash 122 mm system that allows for quadruple glazing facilitating a total accoustic silence and an optimum thermal insulation. There is the possibility of incorporating a manual or motorized venetian blind or shutter in the internal (65 mm) chamber. Also Access to the chamber is possible for cleaning and maintenance. Additionally there is a quadruple gasket system that improves the thermal and accoustic insulation.

Curcuma contains 475mg active curcuminoids per capsule, contains standardized ginger extract (with 20% gingerols) and essential oil of turmeric root. urmeric root extract: contributes to the maintenance of flexible joints * supports the immune system * helps digestion and the digestion of fats* supports the functioning of the nervous system * * = Health claims pending approval by the European Commission. Benfida Curcuma contains turmeric root extract with 95% curcuminoids (the full complex) combined with the essential oil of turmeric root, which is rich in turmerones. For a broader effect, a standardized ginger extract was added, with 20% gingerols (active ingredients of ginger). Unique to Benfida Curcuma is that it contains a much higher concentration of curcuminoids than turmeric powder, which is available as a spice in the kitchen.

iglidur® JATM, metric d1 [mm]: iglidur® JATM/VATM consists of a hard-anodized ring and a bearing ring made of iglidur® J (JATM) and iglidur® V400 (VATM). These glide pairings fetch low coefficients of friction and high wear resistance - without lubrication. Special features Maintenance-free plain bearing system For high service performances High stiffening Simple installation Material: iglidur® J High temperature options VATM, iglidur® V400 More dimensions and supplies on request When to use it? When an axial bearing system with defined gliding partners is desired When extremely high wear resistance is required When a very low coefficient of friction is desired When not to use it? When an additional angle compensation is required igubal® axial bearing When little mounting space is available iglidur® J When only sporadic movements are present iglidur® G Y = wear [μm/km] Figure 36.1: The diagram shows the influence of load (p in MPa) and speed (v in m/s) on the wear of the axial bearing. Y= Coefficient of friction Figure 36.2: In the test with different speeds (v) and loads (p) the coefficients of friction of the bearing systems were determined (v in m/s, p in MPa). iglidur® JATM, metric d1 [mm]:

- Low-maintenance system for travel up to 100 m - Other sizes and versions available, travel up to 200 m and more with E2 roller e-chains® - Protection against weather and dirt exposure - Cost-effective and fully enclosed complete solution - Standardized and modular design - Simple wall assembly or optional floor mounting - Cable lengths up to 50% shorter than festooning, low-profile installation and no cable junction - Cables are at all times guided with a defined bending radius, and tensile forces are absorbed by the e-chain® - Cables cannot hook, jam, or tear - No slip ring contacts (as is the case on motor drums) -Cables or hoses can easily be retrofitted at any time Reduce electricity costs - direct drive due to scraper, no additional drives needed (as is the case on motor drums) Scraper arm (e.g. as mechanical connection to the scraper carriage) optionally available - we document the situation on-site and will propose a customised solution

Safe energy and data transmission The igus® Chainflex® cable range offers a choice of over 850 different cables, available from stock. A main focus of the range are the data and bus cables. Solutions based on copper, glass or plastic fiber optic cables are provided for almost all bus systems in industrial use. We continue to provide you with all supply cables for your drive systems such as motor cables with and without brake/tacho cables and the matching feed cables. Ready assembled with plugs and sockets on request. Cost-reducing assembly The use of pre-assembled E-ChainSystems® enables expensive assembly hours at the place of installation to be considerably reduced. Functionally tested systems guarantee that plant components are soon put into operation. Assembly service We would be pleased to send you an offer for complete solutions, including all assembly services. You do not tie up your own resources and you have a trouble-free energy supply system for the future at a fixed price. LBT FLIZZ® - High speeds and accelerations Travel distances up to 120m, travel speed up to 8 m/s Suitable for moving or stationary controls, ideal for all bus systems When light weight is required When quiet, maintenance-free operation is required When rust-proof property is required At -10°C to +60°C constant temperature At accelerations over 10 m/s² Energy supply system for all media, not only electrical Also suitable for outdoor use (with reduced load data) Your benefit from LBT FLIZZ® Guaranteed service life Cost-effective compared with conventional energy supply systems Cable protected against dirt, rain, sun, ice, snow and leaves Insensitive to wind and motion Good resistance to chemicals, solvents, etc. Use of special cables possible, e.g. servo drive cables, fiber optic cables, bus systems etc. almost maintenance free Quick and easy installation due to delivery as a ready-assembled system Easy integration with existing plants Cable length 50% of the travel distance No central cable junction No effort required to maintain carriages Sewage treatment plant Longitudinal scrapers Sand traps Rain water overflow reservoir Galvanizing equipment Cranes Plant construction Space-saving and compact energy supply with LBT FLIZZ® - low maintenance system, delivered pre-fitted with ready-assembled igus® E-Chain Energy supply system protected from wind and weathering. The used materials are weather-resistant, as well as resistant against most chemicals, oils, fats, coolants and solvents Solid plastic with powder-coated support tubes Modular assembly: the system can be enclosed with intermediate panels! Can be delivered pre-fitted Variable fields, which are simply screwed on top of each other Glide rail integrated in the profile

High powered and fuel efficient • - Virtually maintenance-free oil-cooled disc brakes or Shoe brakes • - 2 Speed powershift Transmission • - Lift and Tilt Locking Hydraulic Control Valve • - Enhanced maintenance and Serviceability • - OSS(Operator Sensing System) o - No truck moving with an operator’s absence on driver seat o - Hydraulic lifting and lowering o - Parking Brake warning o - Seat Belt Indicator • - Available Emission Regulation o - Diesel : EPA Tier Ⅱ, Ⅲ / EU Stage Ⅱ, ⅢA

If the service is right, every production plant will work economically for many years. We offer you a qualified repair and maintenance service, even for older machines and third-party products. Our service technicians will look after you quickly and anywhere with fully equipped vehicles. We pay attention to the good training of our personnel. Experienced mechanics, locksmiths or electronics specialists offer you every support to ensure the perfect functioning of the delivered systems. Our plant service – also for older machines and other manufactures!

If you do not need your battery system at the moment, we would be delighted to take over the logistics and maintenance for you. Our services in detail: Receiving inspection and reconditioning of your battery Storage in accordance with the currently valid regulations Regular checks and charging processes If the battery is not retrieved after an extended storage period, the capacity is redetermined and the results are presented for a decision to be made.

So that everything runs smoothly

NSPV solar AC combiner box An kind of electrical enclosure that securely unites multiple wires and cables through various ports of entry. A solar combiner box combines the output of numerous strings of PV modules for connection to the inverter which improves the reliability and facilitate the installation and maintenance of the system.

Microinverter EPP 2000W is with 4 MPPTs inputs for 1 to 4 panels. With the EPP, all 4 modules are connected separately and controlled individually. Thanks to the intelligent monitoring platform, EPP's inverter supports instantaneous remote shutdown when an accident occurs. Remote setting of parameters and FW update, which simplifies the operation and maintenance of the PV system.

Enhance your machinery with our high-performance PEEK transmission accessories, designed for superior strength and longevity. Made from Polyether Ether Ketone (PEEK), these components are perfect for industrial and automotive applications, offering exceptional resistance to wear, chemicals, and high temperatures. Whether you need gears, bearings, or bushings, our PEEK transmission accessories ensure reliable performance and reduced maintenance costs. Upgrade your systems with our durable PEEK solutions and experience enhanced efficiency and reliability.

Microinverter DEYE 1600W is with 4 MPPTs inputs for 1 to 4 panels. With the DEYE, all 4 modules are connected separately and controlled individually. Thanks to the intelligent monitoring platform, the DEYE inverter supports immediate remote shutdown when an accident occurs. Remote setting of parameters and FW update, which simplifies the operation and maintenance of the PV system.

Microinverter DEYE 2000W is with 4 MPPTs inputs for 1 to 4 panels. With the DEYE, all 4 modules are connected separately and controlled individually. Thanks to the intelligent monitoring platform, the DEYE inverter supports immediate remote shutdown when an accident occurs. Remote setting of parameters and FW update, which simplifies the operation and maintenance of the PV system.

Microinverter EPP 1600W is with 4 MPPTs inputs for 1 to 4 panels. With the EPP, all 4 modules are connected separately and controlled individually. Thanks to the intelligent monitoring platform, EPP's inverter supports instantaneous remote shutdown when an accident occurs. Remote setting of parameters and FW update, which simplifies the operation and maintenance of the PV system

Microinverter EPP 1000W is with 2 MPPTs inputs for 1 to 2 panels. With the EPP, all 2 modules are connected separately and controlled individually. Thanks to the intelligent monitoring platform, EPP's inverter supports instantaneous remote shutdown when an accident occurs. Remote setting of parameters and FW update, which simplifies the operation and maintenance of the PV system.

Stand alone cross stack optical dust monitor suitable for measuring emissions after electrostatic precipitators and stacks without filtration systems. • emissions measurement (mg/m³) • advanced sensor design includes automatic drift checks • resistant to contamination • simple installation, setup and maintenance • external display and keyboard for easy setup • can be purged with instrument air providing lower cost of ownership • lower level of maintenance than traditional opacity systems • mg/m³ output, once calibrated

TÜV approved DynamicOpacity™ particulate monitor for emission measurement of dust from large dry industrial processes including baghouses and electrostatic precipitators. • simple installation, setup and maintenance • resistant to contamination • lower level of maintenance than traditional opacity systems • can be purged with instrument air providing lower cost of ownership • compliance measurement after electrostatic precipitators and baghouses • advanced sensor design includes automatic drift checks • mg/m³ output, once calibrated

Stainless steel digester with a digester chamber volume of 100 to 2500 m3 Integrated gas accumulator – fixed in gutter for high operating safety Optimised diameter to height ratio for optimum mixing and minimal stirring Low maintenance, external panel heating system Flexible stirring technology which can be adapted to the substrate and digester Stirring technology can be maintained without having to empty the tank

Kendrion offers for its CODESYS-based controllers a library with blocks for motion control functions according to PLCopen for various drive controllers. The Kuhnke Motion Control library provides a wide range of function blocks for parameterization, positioning and diagnostics of the drive. The blocks are simple and intuitive to use and support in all phases of the workflow e.g. during programming, commissioning, diagnostics and maintenance. The motion task in the control system can thus be programmed simply, quickly and thus economically. A drive with only a few lines of code is put into operation via the corresponding visualization templates. The library supports drive controllers from various well-known companies and supplies a wide range of standardized functions. The communication between the drives and the control can take place via various fieldbuses such as EtherCAT®, CAN, Modbus or RS-485. Features

SPECIAL CONVEYING SYSTEMS CONVEYING OF PACKED AND BULK PRODUCTS IN THE PRODUCTION PROCESS WITH “METAL FREE AREA” FOR THE INTEGRATION OF METAL DETECTOR Budget sparing individualized solutions. Guaranteed long-term, trouble-free metal detection results. Continuous operation, reliable and with low maintenance. Systems available for nearly any application, from mill feeding over bag checking to the Transport of textile fibres.

Precise atomisation and spraying can be continuous or selective. The revolutionary combination of continuous flask and low-flow spray chamber guarantees perfect spraying of low to highly viscous media with high edge sharpness and minimum overspray. Fields of activity: - Dosing - Coating - Microsputtering - Lubrication - Marking and much more. Materials: - Fats/oils - Colours - Activators/primers - Abrasive materials - Adhesives - Silicones - Solid-laden materials and much more. Advantages: - Constant quantity/area - Uniform spray pattern - Uniform coating - Little overspray/high edge sharpness - Defined volume per revolution - High chemical resistance - High spread - Adjustable round jet - From dot spraying to continuous spraying - Low-maintenance system - flow rate of the medium and atomising air can be regulated independently - High application efficiency