Main installation - Import export

Single-phase 230 Volts F-010 plug for level regulator. Breaking capacity: 16 A. It is installed between the mains plug and the pump plug in order to adapt a level regulator float to fit it, thereby automating the operation of the pump.

1 heating chamber, main blower installed at the bottom, cooling blower at the tunnel outlet, o and sizes. total length 1.800mm, hood opening 600x250mm, hood length 1.200mm, heating power 15KW, speed to 20 containers per minute

Being produced in ELKON’s latest tech production facilities, mobile continuous mixing plants (pugmills) can be easily transported via axle and tyres installed on the main unit. Thanks to its superior mobile design, these plants are installed on a flat concrete surface without foundation requirement and can be relocated easily so that the user doesn’t have to travel long distances for material transportation. These mobile pugmill plants are mainly used for for subbase (stabilization) material with / without cement production and RCC concrete for dam or road pavement projects. Mobile continuous mixing plants, also known as WOLF in ELKON’s product range, are equipped with 5000/2500 l. ELKON continuous twinshaft mixer. All materials are mixed passing through ELKON C200 mixer continuously according to the recipe and flow speed.

Variable speed peristaltic doser, with IP65 class polypropylene housing, compact and easy to install. Main application, detergent dosage for dishwashing machines.

Peristaltic doser with microprocessor and display, IP65 class polypropylene housing, compact and easy to install. Main application, dosing detergent for dishwashing machines and/or boxes. All settings are programmed using the keypad on the front of the device.

• Very slim, light-weight construction for shirt or coat pocket, with clip • Universal key for almost all common switch cabinets & closures • Key profile for these applications: electrical engineering, heating and sanitary installations, air-conditioning and ventilation, industry, building technology, e.g. switch cabinets, mains switchboards, locking systems, technical installations and many more • Bit (1/4") made from high-quality tool steel and specially hardened • Universal 1/4" bit holder for standard bits, with permanent magnet to hold bit in place • With ultra-bright LED torch in the clip • The twist mechanism allows four different profiles to be activated. • Made of reinforced fibreglass plastic • Made of zinc casting (GD-Zn)

— For the reliable fuel supply with oil — Suitable for all Bosch boiler systems with oil burner and ring mains supply — Preassembled for fast installation — Can also be configured for liquid biofuels and special fuels on request Highly efficient boiler systems with perfectly matched boiler house components ensure that low levels of energy consumption and emissions are achieved.

• Universal key for almost all common switch cabinets & closures • Key profile for these applications: electrical engineering, heating and sanitary installations, air-conditioning and ventilation, industry, building technology, e.g. switch cabinets, mains switchboards, locking systems, technical installations, for venting heating systems and many more • The twist mechanism allows eight different profiles to be activated. • Universal 1/4" bit holder for standard bits, with permanent magnet to hold bit in place • Made of reinforced fibreglass plastic • Made of zinc casting (GD-Zn)

• Particularly easy-to-handle version • Universal key for almost all common switch cabinets & closures • Key profile for these applications: electrical engineering, heating and sanitary installations, air-conditioning and ventilation, industry, building technology, e.g. switch cabinets, mains switchboards, locking systems, technical installations, for venting heating systems and many more • Plastic adapter with 1/4" bit-holder and retaining chain, approx. 20 cm • Bit (1/4") made from high-quality tool steel and specially hardened • Made of zinc casting (GD-Zn)

• For almost all common closures • Key profile for these applications: electrical engineering, heating and sanitary installations, air-conditioning and ventilation, industry, building technology, public services e.g. switch cabinets, mains switchboards, locking systems, technical installations, for venting heating systems and many more • With strong chain and snap hook • Universal 1/4" bit holder for standard bits, with permanent magnet to hold bit in place • The twist mechanism allows eight different profiles to be activated. • Made of zinc casting (GD-Zn)

• Universal key for almost all common switch cabinets & closures • Key profile for these applications: electrical engineering, heating and sanitary installations, air-conditioning and ventilation, industry, building technology, e.g. switch cabinets, mains switchboards, locking systems, technical installations, for venting heating systems and many more • Universal 1/4" bit holder for standard bits, with permanent magnet to hold bit in place • With bottle-opener • Made of zinc casting (GD-Zn)

The pressure relief valves GEMÜ N085 and N185 protect the plant and the piping system against gauge pressure and reduces pressure peaks. The third pipe spigot enables the valve to be installed in the main pipe. If the pressure increases, the spring is raised and the valve opens. The pressure is reduced to the preset value and can escape via the third pipe spigot into an adjacent pipe. If the pressure falls, the spring force presses the diaphragm in the direction of the seal seat and it is closed. The spring force can be adjusted as required using a set screw. - Valve adjustments can also be made under working pressure. - The optimization of piston, springs and control face ensures good control characteristics - The actuator is hermetically separated from the medium

Drying processes with hot air generators fully configurable in flow and air pressure AGM hot air generators are units that work completely autonomously, they do not need heat dissipative elements, which reduces acquisition and installation costs. They can run on diesel, natural gas or propane gas and their function is based on heating the air drawn in by the fans and driving the hot air inside the room to be heated or dried. Its design allows the application of all types of low, medium or high pressure fans according to the needs of each installation. The main advantages over other heating systems are: - Reduction of acquisition and installation costs. - Very fast heating or drying system. - Air diffusion can be direct or a network of ducts can be applied. - 90% combustion efficiency. - Possibility of supply with low, medium or high pressure fans.

The aluminium pressure die-cast protective shroud (F3: aluminium sand casting) fully shields the pedal at the top and sides while the wide base provides a high degree of stability. It reliably prevents accidental operation from above by falling objects or careless operation from the side. Due to its robust construction the protective shroud withstands a drop of 20 kg from a height of 1 m. The foot switch is uniquely designed to allow inclusion of additional equipment: — Emergency Stop button — Contactor on DIN rail as main power switch — Customized installations (e.g. light indicators)

Anchor bolt with nut The main purpose is the installation of various structures (steel structures, barriers, fences, etc.) in solid materials. It consists of a sleeve, a stud with a cone at the end and a gasket nut.

Driva dowel, plastic / metal with a drill bit The main purpose is installation in a plasterboard wall. With a drill bit, it is screwed in without pre-drilling. The design of the dowel prevents its spontaneous unscrewing and ensures fastening without straining. After installation , the material is attached to it with a screw. If necessary, it can be turned out of the wall.

EMA foam bladder tank system is a system for mixing foam concentrate with water. A major advantage of the foam bladder tank system is that it can be installed in the main flow and subsequently it doesn't need an external energy supply. The integrated water reference test option offers a functionality test without foam consumption. EMA bladder tanks are being offered as two different type: Vertical and Horizontal. All offered type has different options as Pre Piped or Not Pre Piped.

CHARACTERISTICS high operating safety robust, compact design pressure resistant up to 350 bar easy maintenance flow direction selectable drag indicator as standard Dual scale bar / psi or mbar / kPa universally applicable selectable display indicating range OPTIONS helium application on demand plastic housing stainless steel housing static pressure max. 450 bar GENERAL The differential pressure gauge DP 900 serves to monitor the differential pressure of filter systems, measuring systems, valves, coolers, heat exchangers, in petrochemical, as well as in gas and air systems. Preferably, the DP 900 is applicable for air and gas technical systems. The gauge housing made from aluminum is designed compact and robust. It is pressure-resistant up to 350 bar. FUNCTION A determined path of a freely movable piston measures the differential pressure. The piston retains against a compression spring. The magnetic spool-measuring device unit is been installed to the main housing.

A single phase roller shutter remote control system with courtesy light and control buttons. For use with roller shutter doors and roller garage doors that use a tubular motor with built in limit switches. Comes with a built in 868MHz receiver. Very easy to install, simply supply mains voltage and connect the 4 motor wires. It also has connections for a key switch, safety terminals and 24Vac output. 2 pre-programmed transmitters included.