Magnetic shields - Import export

Housing, steel. Magnetic core hard ferrite. Shallow pot magnets, shielded system. Hairline cracks in the magnetic material are unavoidable for technical reasons in D=80, D=100 and D=125 versions. They do not impair the attracting function of the magnets in any way.

The INFICON Inverted Magnetron Pirani Gauges, MPG400 and MPG401, measure from 5 x 10 -9 mbar toatmosphere (3.8 x 10 -9 Torr to atmosphere). Combining technologies into one single compact unit withone logarithmic analog out put signal significantly reduces the complexity of installation, setup an dintegration. This Cold Cathode inverted magnetron Gauge MAG400 series is direct replacement of the PTR 90 Transmitter series: Part-No Typ Part-No Typ 351-010 MPG400 DN25 ISO-KF = 230 070 PTR 90 DN25 KF 351-011 MPG400 DN40 ISO-KF = 230 071 PTR 90 DN40 KF 351-012 MPG400 DN40 CF-F = 230 072 PTR 90 DN40 CF 351-999 MPG400 Maintenance set = none 351-998 MPG400 Repair set = none 351-995 MPG400 Spare-ignition aid (10 pcs) = none 351-994 MPG400 Ignition tool set = none 351-023 MPG400 Magnetic shield = 230 073 V01 PTR 90 Magnetic shield Within our own INFICON channel we also offer the type MPG401, which is a metal sealed version of the MPG40x line. For further information please check out the...

Housing, steel. Magnetic core AlNiCo. Hard magnet in aluminium housing and steel jacket. Shielded system. Pot magnets are used for retaining, lifting and mounting in fixtures. Due to the painted surface, the diameter D can be up to +0.8 mm.

Housing, steel. Magnetic core NdFeB (neodym). Protective rubber jacket, synthetic rubber. Housing, electro zincplated. Black protective rubber jacket. Shallow pot magnets with tapped pin, shielded system. With rubber protective jacket for protecting sensitive surfaces. The coefficient of friction is increased by the rubber jacket so that high lateral friction is achieved. magnetic face 2) magnet 3) rubber

Silicon nitride heat shields and magnetic rings are mainly used to protect high voltage electrodes and are widely used in the photovoltaic industry.Heat shields and magnetic rings, as well as ceramic rings, are collectively referred to as electrode shields.Silicon nitride electrode protection cover mainly uses silicon nitride insulation, heat resistance and corrosion resistance.Compared with the protective cover of quartz and alumina which is still in use today, the service life of the silicon nitride electrode shield is more than 10 times, and it will not be electrically broken down during use, and will not be heated, nor will it be heated. Will be eroded away. Due to its own stability, in the use of photovoltaic reduction furnaces, the collapse rate of non-human factors is greatly reduced. Silicon Nitride (Si3N4) Characteristics: 1 Good thermal shock resistance 2 Creep resistance 3 Low density 4 High fracture toughness 5 High hardness and wear resistance 6 Electrical resistivity

Moly Permalloy® is a Nickel-Iron-Molybdenum alloy with a magnetic permeability that makes it suitable for electrical shielding applications. The alloy can be readily formed from the annealed temper.Effective magnetic shielding is provided by annealing at 1900°F or higher. Joining is accomplished by spot welding or tungsten inert gas welding. Available Sizes: Moly Permalloy® is available from Hamilton Precision Metals as strip product from 0.0005” to 0.015” (0.0127 mm to 0.38 mm) in widths to 12.0” (304.8 mm). It is also available in foil as thin as 0.000100” (0.00254 mm) in widths of 4.0” (101.6 mm) maximum. The metal conforms to ASTM A753, Type 4 and MIL N 14411, Type 1.

It has a long track record as an Elevator landing switch and door zone switch, and contributes to the improvement of poor contact. By shielding the magnetic field of the magnet with a magnetic vane (1.6 mm or more), the output of the contact is switched, so no external power supply is required. Non-contact drive using magnets eliminates mechanical wear and has a long service life.

Product Features: • Primary 115 VAC, 60 or 400Hz. models, 3 case sizes. • Epoxy cast to withstand shock and severe environments. • Two coil design provides balanced windings and low magnetic radiation - no electrostatic shield required. • 228 Series include four, 6-32 x 0.38 machine screw inserts for less strain on P.C. board connections.

Alloy scrap with high magnetic permeability (soft magnetic alloys). It is used in production of cores for small-sized transformers, chokes and relays operating in weak fields of magnetic shields. Scrap with small thickness (0.05-0.02 mm) is used in production of cores of pulse transformers, magnetic amplifiers and static relays.Chemical composition: Ni 78,5% — 80% Mn 0,6% — 1,1% If 0.3% - 0.5% C < 0.3% Mo 3.8% - 4.1% Fe = balance GOST 10994-74 Precision alloys. Grades.

Tesla manufacture a wide range of Superconducting magnets for OEM clinical and research MRI systems. Tesla Engineering is pleased to announce a next generation whole body 9.4T magnet and HFC14 gradient system has now been successfully tested and is being supplied to an academic research facility in Asia.The Tesla portfolio of UHF products includes the Compact 7T whole body active shield magnets, 9.4T whole body zero‐ boil off magnets, and 11.74T head only magnets as well as a full range of state‐of‐the‐art high field gradient coils. These UHF magnet and gradient systems are used for scientific and medical research, for structural and functional imaging of the brain and other anatomies. Researchers using UHF MRI systems hope that their research will contribute to earlier disease detection, more accurate diagnosis and increased effectiveness of investigational therapies for disorders and diseases such as cancer, stroke, epilepsy ... ** Click for more **

Electric motors of the MP112, MР132, MР160, MР225 type are DC motors used for the main movement of metal-cutting machines and other production mechanisms. The MР motor (112, 132, 160, 225) consists of an anchor, a stator-charged magnetic conductor, bearing shields, output device, fan assembly. All types of MР motors have a built-in tachogenerator (directly on the motor shaft), thermal protection, ventilation unit and output device. There are two types of tachogenerators in the MР series electric motors: the 4P tachogenerator (20V / 1000min-1) and the T5-10 tachogenerator (10V / 1000min-1) is a four-pole. The stator is housed in an aluminum shield that is centered in the rear engine shield and bolted. Thus the tachogenerators do not have their bearing system and rotate with the rotor of the motor. The MР motor unit consists of a three-phase asynchronous AT71A2 type motor - 0.370 kW (MР112, MР132 engine), AT80A2 - 0.750 kW (MР160, MР225 engine) and a turbine housing with a filter body.

DESCRIPTION Circular electromagnet, heavy-duty and service cycle of 75% ED. Built of copper or aluminum coil, according to capacity requirements. Among the construction characteristics, it is worth mentioning: ·Heavy-duty monobloc carcass of moulded steel with high strength ribs and high mechanical strength ·Two protection shields of non magnetic steel ·Heavy-duty connection box ·Isolation class H ·Lugs with steel bushes to avoid wear ·Suspension chain of three ways of high strength alloy steel with a traditional eye bolt APPLICATIONS Aimed at meeting any handling need for ferrous materials: from small scrap yards to heavy duty steel industry. Due to their low weight and high mechanical strength they are ideal for hydraulic boom cranes in high performance applications. Adequate for underwater works following prior minimum service.

Knitted wire mesh gaskets provide an excellent cost effective EMI gasket, providing shielding in the magnetic as well as electric fields. Kemtron knit in four wire types, Monel, Stainless steel, aluminium and tin plated copper clad steel. Knitted mesh gaskets can be supplied as solid mesh or knitted over elastomeric cores with or without environmental seal in continuous lengths or fabricated to custom designs.