Results for
BRUGGER GMBH MAGNETSYSTEME
Germany
The systems will be delivered inclusive a suited counterpiece. The coating has a rubber cap for damping function and aesthetic improvement.
Request for a quoteBRUGGER GMBH MAGNETSYSTEME
Germany
The above mentioned filter bars are our standard designs. Here the end pieces are not sealed tight and therefore only suitable for dry applications. Not available ex stock, manufactured on demand Alternative to the standard we also offer individual solutions: » Seal-welded model for use in liquids (e.g. water, coolant) » High-quality stainless steel enclosure for use in food production » Increasing the max. operating temperature up to 350 °C » Manufacture of individual, not standardised sizes
Request for a quoteBRUGGER GMBH MAGNETSYSTEME
Germany
Alternative to the standard we also offer individual solutions: » Corrosion protection with black galvanised housing surfaces (up to 720 hours in a salt spray test - depending on the magnet material)
Request for a quoteBRUGGER GMBH MAGNETSYSTEME
Germany
Alternative to the standard we also offer individual solutions: » Corrosion protection with black galvanised housing surfaces (up to 720 hours in a salt spray test - depending on the magnet material)
Request for a quoteBRUGGER GMBH MAGNETSYSTEME
Germany
The systems offer better resistance to chemicals than normal steel galvanised flat pot magnets. The systems offer higher temperature resistance to chemicals than normal steel galvanised flat pot magnets.
Request for a quoteBRUGGER GMBH MAGNETSYSTEME
Germany
These systems are used especially on delicate surfaces. Due to the rubber coating occurs neither scratches nor discoloration. Moreover the slip resistance is improved thanks to rubber coating. Alternative to the standard we also offer individual solutions: » Other colours rubber coating » Rubber coating harder or softer » printable rubber coat
Request for a quoteBRUGGER GMBH MAGNETSYSTEME
Germany
These systems are used especially on delicate surfaces. Due to the rubber coating occurs neither scratches nor discoloration. Moreover the slip resistance is improved thanks to rubber coating. Alternative to the standard we also offer individual solutions: » Other colours rubber coating » Rubber coating harder or softer » printable rubber coat
Request for a quoteBRUGGER GMBH MAGNETSYSTEME
Germany
Alternative to the standard we also offer individual solutions: » Corrosion protection with black galvanised housing surfaces (up to 720 hours in a salt spray test - depending on the magnet material)
Request for a quoteBRUGGER GMBH MAGNETSYSTEME
Germany
The above mentioned flat pot magnets are manufactured from standard parts according to DIN EN ISO 4017-8.8. Dimensions and tolerances depend on the current status of the standard. Hexagon screws are suitable for being tightened with an open-end spanner. This is a special advantage in comparison to our round flat pot magnets, which only can be screwed on by hand. The hexagon screws are available with different lengths corresponding to fixed standards. By this simplified production method they are quite economical resp. there is a cost benefit compared with the turned special parts.
Request for a quoteBÜRKLE GMBH
Germany
The stand for sedimentation funnels is used to keep, hold or store Imhoff funnels safely and reliably during sedimentation. Two funnel holders ensure that Imhoff funnels will be held safely and securely and can be placed in an absolutely vertical position. Stand with two holders for sedimentation funnels, suitable for funnels 90 mm or more in diameter. Thanks to an innovative magnet concept no clamping screws are necessary. The height of the funnel holder can be adjusted easily and flexibly with one hand. With the corresponding accessory the holders for Imhoff funnels can also be replaced by holders for all-purpose funnels.
Request for a quoteNORELEM FRANCE
France
Housing fibreglass reinforced thermoplastic polyamide. Sight glass thermoplastic polyamide. O-ring and flat seal NBR. Reflector PVC. Float plastic. Screw and nut, steel. Version: Housing black. Sight glass crystal clear, high mechanical stability, non-ageing. Reflector white. Float red, with magnetic element. Screw and nut electro zinc-plated. Note: The oil level gauge not only enables the oil level to be viewed but also recorded using a REED switch. In addition, the oil level gauges can also emit an electric signal if the temperature of the liquid inside the container reaches the threshold of 70 °C. As soon as the float element approaches the selected minimum value after the circuit has been closed, the system emits an electric signal. The sensor is located on the housing and its height can be adjusted in line with the control requirements for the oil level. The minimum level is ca. 35 mm from the centre of the lower fastening screw.
Request for a quoteBÜRKLE GMBH
Germany
Funnel stand with two funnel holders and two reducing inserts. Space-saving design with two practical storage areas. Sturdy and stable funnel stand, resistant to chemicals, shatter-proof and with continuously variable height adjustment. The funnel stand is suitable for all funnels from 40 to 180 mm in diameter. The funnel holders can be used with reducing inserts for small funnels. The funnel stand also makes an excellent filtering stand. Thanks to an innovative magnet concept no clamping screws are necessary. The height of the funnel holder can be adjusted easily and flexibly with one hand. The laboratory stand can be flexibly adapted with corresponding accessories, for example with adjustment funnel holders or a holder for Imhoff funnels. The funnel stand can also be converted into a pipette stand.
Request for a quoteXIAMEN INNOVACERA ADVANCED MATERIALS CO., LTD
China
Silicon Nitride Ceramic Balls are widely used on bearings with extreme performance requirements, such as: High-speed bearings, high precision bearings, vacuum bearing, high / low-temperature bearing, non-magnetic bearing, high precision ball screw; it is also used as valve ball, measuring ball for the chemical pump, heat pumps, metering pumps. Its excellent properties including: Good corrosion resistance withstands attacks from harsh chemicals and environments. High-Temperature Hardness is twice that of steel, Silicon nitride ceramic balls retain their strength and hardness up to 1800 degrees F.Lightweight, silicon nitride ceramic balls’ density is 3.20g/cm3 and weighs 45% less than steel which reduces centrifugal force, skidding and wear under high speed and acceleration, so greatly extending the service life. Superior Surface Finish is conducive to improving working speed and reach higher accuracy.
Request for a quoteFATH GMBH
Germany
Alu Connection Angle for aluminum profiles 40 & 40x80 To connect two aluminum profiles quickly at right angles, direct inserting into the profile slot thanks to correct positioning of the pre-assembled magnet rhombus screws and countersunk nuts; the connection angle can be closed with the cover cap Color/Material: Angle: Aluminum die-cast; alu color lacquered Cover cap: Plastic PA, glass fiber reinforced; Black or gray Countersunk nuts: Zinc plated Magnet rhombus screws: Steel Other surfaces, other colors on request
Request for a quoteSHENZHEN VETURE TECHNOLOGY CO., LTD.
China
Input Voltage: 10-110V LED Power: 5W 5pcs*1W Color: Yellow Mode: Rotary/SharpFlash/FastFlash/LowFlash Material: PC cover+ABS base Cable: VDE approval, 40cm length Installation: Screw mounted(Magnet base optional) IP Rating?IP65 Life time: 30000 hours Certificate: CE, RoHS
Request for a quoteOPTIMA CONSUMER GMBH
Germany
Containers: - Container or cap feed as bulk goods via fully automatic sorting and optional storage bin - Container classification using a portioning device - Centering the container for the optimal positioning of the containers below the work stations - Cycled container transport Design: - Simple assembly (plug and play) - low installation costs - Explosion protection model is optional - Good visibility and accessibility - Min./max. Sensors for jam detection upstream and downstream of the machine - Secure and sturdy mechanical system - Standard version with 1 working station - Few moving parts resulting in minimized sealing and maintenance costs Drive: - Precise compliance with the torque specification using the slipping clutch or permanent magnet coupling - Screw spindle with adjustable speed Manufacture/Closing: - Simple integration into existing packaging technologies - Processing all standard types of caps
RATEC GMBH
Germany
RATEC magnetic strips for the quick and clean formation of chamfers, drip moulds or dummy joints. Our strips are made of high quality steel (some encased in rubber) with built-in magnets. This means that screwing or welding on the table or on the formwork can be omitted.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
Results for
Magnetic screws - Import exportNumber of results
17 ProductsCountries
Company type