Magnetic lifting devices - Import export

Our magnet control rectifier product is produced as 220 VDC or 120 VDC for magnet lift devices. Application powers vary between 3 kW and 60 kW. The magnet control rectifier can be easily operated by the user with the remote control Start-Stop remote control, and lifting and dropping operations are performed safely. In addition, the inductive energy released during closing (demagnetism) is eliminated by a special damping snubber circuit, ensuring smooth operation of the on-off contactor. Magnetism and Demagnetism are done with automation-controlled control on the rectifier panel, On-Off and Reverse-Direct voltage application technique. In addition, due to the buffer charging feature of the rectifier, the battery group can be connected to the desired Ah capacity, ensuring healthy charging and at the same time ensuring uninterrupted safe operation of the iron lifting magnet in case of power outages. Iron removal rectifier (magnet rectifiers), special type input and output upon request.

Lifting magnets are ideal load lifting devices for everyone who has to work in a quick and safe way.They offer a lot of practical advantages; anywhere the moving of ferrous loads are necessary, for example: in material storage, transport industry, device construction and for loading and unloading of machinery. Made in Germany • Standard conformity and inspected CE/EN 13155/MRL 2006/42 EWG • Product guarantee with German insurance company • Multilingual documentation • Environmentally friendly and future-proof by more power and lower SE magnet consumption • 3 years Warranty • Safety factor 3,5 • Guaranteed a spare parts supply for 10 years • CAD files available

FX-R is the series for round material handling. The deep shallow-angled prism ensures safe positioning on the load and guides the magnetic field deep into the material. The magnet system can be switched well in the entire diameter bandwidth and does not recoil, shearing of the load due to twisting is prevented by the overlapping prism. Flat material, even with low material thickness, is no problem for the FX-R. With hot workpieces, the deep prism protects the magnet core from overheating. The lifting magnet for shafts and bars.

FX-KT small trusses lift workpieces that cannot be picked up with a magnet in the center, such as rings, punching tools and flanges. Two FX magnets, adjustably mounted on a truss made of high-strength aluminum, provide a secure hold. With a few simple steps, the magnets can be removed from the truss and used individually.

FX lifting magnets in universal design convince by their wide field of application. The FX achieves good results with large air gaps as well as with thin flat and round materials with a compact design and low dead weight. The device is characterized by great robustness and a very good price/performance ratio. First choice for all users who want to move massive sheets and blocks.

FX-VV is the lifting magnet for profiles and hot components. The long, narrow design is conceived to pick up beams and profiles, also on the inner web of the beam, and reach their maximum holding force even with comparatively thin material thickness, so that even thin sheets can be lifted safely. Thanks to the 90° double prism, angle profiles can now be can now be picked up on the inside and outside, or components can be turned. Steel fabricators rely on FX-VV.

FXE-MH electro-permanent lifting magnets are especially suitable for transporting slabs and blocks. The electro-permanent modules type MH are designed to safely lift large loads with a large air gap. Electro-Permanent Lifting Magnets FXE Electro-Permanent Lifting Magnets from Flaig Magnetsysteme have been setting standards for over 20 years Electro-Permanent Lifting Magnets are the best choice if: the load to be moved is too large for permanent magnets the lifting magnet must be operated and controlled ergonomically the geometry of the load does not fit permanent magnets the lifting magnet must be remote controlled and possibly load adjustable the load capacity is too large in relation to the material thickness for permanent magnets

FXE-R electro-permanent lifting magnets that can lift round material or, both round and flat material, we manufacture from our FXE basic models with pole shoes that can lift the customized diameter band widths, individually or in layers. Electro-Permanent Lifting Magnets FXE Electro-Permanent Lifting Magnets from Flaig Magnetsysteme have been setting standards for over 20 years Electro-Permanent Lifting Magnets are the best choice if: the load to be moved is too large for permanent magnets the lifting magnet must be operated and controlled ergonomically the geometry of the load does not fit permanent magnets the lifting magnet must be remote controlled and possibly load adjustable the load capacity is too large in relation to the material thickness for permanent magnets

Equipped with pole type 50+ in long narrow design and a maximum load capacity of 400/600/1000 kg, which is achieved with material thicknesses from 15mm, these easy-to-guide and operate devices are recommended for lifting battens, rails, pipes, beams and bars. Also using pole extensions, which make it easier to position the magnets on long narrow bars.

FXE-M electro-permanent load lifting magnet modules can be combined with MCF control units to form modular load lifting systems. For example, a single FXE-M module with an MCF 1-channel control unit can be used on the crane of a flame-cutting machine, or 4 FXE-M modules, controlled together or individually by an MCF 4-channel control unit, can operate in a fully automatic sectional steel plant. In use on cranes, manipulators, conveyors and robots, FXE-M modules have proven themselves thousands of times over. FXE-M modules are manufactured using monoblock technology and are extremely stable. As with the other products in the FXE series, a choice can be made between different pole types in order to use the appropriate magnet module depending on the load, dimensions and surface.

Electro Permanent Magnetic Beam with integrated Battery Group. 10 Electro Permanent Magnetic modules, elastically suspended for perfect adaptation on the Steel Plate. Safety Factor of 3. For lifting of Steelplates with max. length of 12.000 mm. Control unit on Board with following Functions: PICK-UP/MAG/SAFE/DEMAG/Module selection/Force 4 Levels Radio Remote Control. Lamp Block for indication of the status of the Magnet. ALD-switch against demagnetisation in the Air.

Electro Permanent Magnet for lifting of Steel Plates, Cutted Pieces, Mechanical Parts, Rounds, ... Integrated Long Life Rechargeable Battery + Charger (230V/50Hz) Control unit with LED push-buttons. Radio Remote Control ALD-switch against accidental demagnetisation in the Air. Protection Bar.

Electro Permanent Magnetic Beam with integrated Battery Group. 8 Electro Permanent Magnetic modules, elastically suspended for perfect adaptation on the Steel Plate. Safety Factor of 3. For lifting of Steelplates with max. length of 9.000 mm. Control unit on Board with following Functions: PICK-UP/MAG/SAFE/DEMAG/Module selection/Force 4 Levels Radio Remote Control. Lamp Block for indication of the status of the Magnet. ALD-switch against demagnetisation in the Air.

Electro Permanent Magnetic Beam with integrated Battery Group. 6 Electro Permanent Magnetic modules, elastically suspended for perfect adaptation on the Steel Plate. Safety Factor of 3. For lifting of Steelplates with max. length of 6.000 mm. Control unit on Board with following Functions: PICK-UP/MAG/SAFE/DEMAG/Module selection/Force 4 Levels Radio Remote Control. Lamp Block for indication of the status of the Magnet. ALD-switch against demagnetisation in the Air. Safety Factor of 3.

The electropermanent load lifting magnet traverses TBK4 and TBK6 with automatic telescopic arm allow the lifting and transportation of sheets in different sizes from 3m to 16m. The patented solid steel modules are more heat-resistant than comparable modules made with a plastic casting mass. Only a 400V rated current must be provided to use these devices and they are then immediately ready for use. Through short electrical impulses within seconds, the magnet traverses from ASSFALG are automatically switched on or manually with the push of a button. No electricity flows during load transport and nevertheless, the workpiece is as securely clamped as with a permanent load lifting magnet. With the tip function (inching), even stacked sheets can be separated starting with a thickness of 5 mm. Magnet modules that are not needed can be switched off with the multi-channel control. This means a large magnet traverse system can be securely used for the transportation of smaller sheets.

Electro Permanent Magnetic Beam with integrated Battery Group, with elastical suspension for perfect adaption on the steel Profile. Safety Factor of 4,8 For lifting of HEA-HEB-IPE-IPN Profiles between 80-600mm and max. length of 6.000 mm. Control unit on Board with following Functions: PICK-UP/MAG/SAFE/DEMAG/Module selection/Force 4 Levels Radio Remote Control. Lamp Block for indication of the status of the Magnet. ALD-switch against demagnetisation in the Air.

The EPM M electropermanent load lifting magnets are used where there is a frequent change of workpieces due to the very short switching times. Only a 230V rated current, depending on magnet with 230V or 400V, must be provided to use these devices and they are then immediately ready for use. Through electrical impulses within seconds, the EPMM from ASSFALG is automatically switched on or manually with the push of a button. No electricity flows during load transport and nevertheless, the workpiece is as securely clamped as with a permanent load lifting magnet. The electropermanent battery lifting magnet EPMM can be used in single mode as well as on magnet traverses and is an interesting alternative for 3-shift operation. With the tip function (inching), even stacked sheets can be separated starting with a thickness of 4 mm.

Electro Permanent Magnet for lifting of Steel Plates, Cutted Pieces, Mechanical Parts, Rounds, ... Integrated Long Life Rechargeable Battery + Charger (230V/50Hz) Control unit with LED push-buttons. Radio Remote Control ALD-switch against accidental demagnetisation in the Air. Protection Bar.

The EPMB electropermanent battery lifting magnets are considered the best load lifting magnet development in the past decades at ASSFALG. They combine the advantages of permanent load lifting magnets with those from electro load lifting magnets. Through electrical impulses within seconds, the EPMB from ASSFALG is automatically switched on or manually with the push of a button. No electricity flows during load transport and nevertheless, the workpiece is as securely clamped as with a permanent load lifting magnet. The electropermanent battery lifting magnet EPMB can be used in single mode as well as on magnet traverses and is an interesting alternative for 3-shift operation. With the tip function (inching), even stacked sheets can be separated starting with a thickness of 6 mm. All technical data can be found in the .pdf file.

Electro Permanent Magnetic Beam with integrated Battery Group, with elastical suspension for perfect adaption on the steel Profile. Safety Factor of 4,8 For lifting of HEA-HEB-IPE-IPN Profiles between 80-600mm and max. length of 6.000 mm. Control unit on Board with following Functions: PICK-UP/MAG/SAFE/DEMAG/Module selection/Force 4 Levels Radio Remote Control. Lamp Block for indication of the status of the Magnet. ALD-switch against demagnetisation in the Air.

The SB950-SF is equipped with the highest safety technology. The electropermanent battery lifting magnet SB950-SF is the top product from ASSFALG in the 950kg load range for flat material. 400kg can be lifted for round material. The SB950-SF has an installed sensor. It measures the magnetic force, compares it with the workpiece weight and shows on the display if the workpiece can be transported. Parameters such as surface property, material thickness and material are considered here. They combine the advantages of permanent load lifting magnets with those from electro load lifting magnets. Through electrical impulses within seconds, the electropermanent battery lifting magnet SB950-SF from ASSFALG can be automatically or manually switched with the push of a button. Even though no electricity is present during the load transportation, the workpiece is clamped as securely as it would be with permanent load lifting magnets.

The electropermanent battery lifting magnet SBs are top products from ASSFALG in the 200kg | 500kg | 950kg load range for flat material. Round material can be lifted with up to 50kg | 200kg | 400kg. They combine the advantages of permanent load lifting magnets with those from electro load lifting magnets. Through electrical impulses within seconds, the electropermanent battery lifting magnets SB200 | SB500 | SB950 from ASSFALG can be automatically or manually switched with the push of a button. Even though no electricity is present during the load transportation, the workpiece is clamped as securely as it would be with permanent load lifting magnets. Approximately 1,000 ON/OFF switch cycles are possible until the integrated batteries must be recharged through a simple power connection. The electropermanent battery lifting magnets SB200 | SB500 | SB950 can be used in single mode as well as on magnet traverses and is an interesting alternative for 3-shift operation.

Electro Permanent Magnetic Beam with integrated Battery Group, with elastical suspension for perfect adaption on the steel Profile. Safety Factor of 4,8 For lifting of HEA-HEB-IPE-IPN Profiles between 80-600mm and max. length of 18.000 mm. Control unit on Board with following Functions: PICK-UP/MAG/SAFE/DEMAG/Module selection/Force 4 Levels Radio Remote Control. Lamp Block for indication of the status of the Magnet. ALD-switch against demagnetisation in the Air.

Electro Permanent Magnet for lifting of Steel Plates, Cutted Pieces, Mechanical Parts, Rounds, ... Integrated Long Life Rechargeable Battery + Charger (230V/50Hz) Control unit with LED push-buttons. Radio Remote Control ALD-switch against accidental demagnetisation in the Air. Protection Bar.

Electro Permanent Magnet for lifting of Steel Plates, Cutted Pieces, Mechanical Parts, Rounds, ... Integrated Long Life Rechargeable Battery + Charger (230V/50Hz) Control unit with LED push-buttons. Radio Remote Control ALD-switch against accidental demagnetisation in the Air. Protection Bar.

Permanent Magnetic Lifters are mainly used to lift steel plates, blocks, press moulds etc. and load / unload in machines during handling operation.They are easy to operation and safe to handle and hence are widely used as lifting devices in factories, warehouses and transportation industries. Please contact us for more information.

Electro Permanent Magnet for lifting of Steel Plates, Cutted Pieces, Mechanical Parts, Rounds, ... Integrated Long Life Rechargeable Battery + Charger (230V/50Hz) Control unit with LED push-buttons. Radio Remote Control ALD-switch against accidental demagnetisation in the Air. Protection Bar.

Electro Permanent Magnet for lifting of Steel Plates, Cutted Pieces, Mechanical Parts, Rounds, ... Integrated Long Life Rechargeable Battery + Charger (230V/50Hz) Control unit with LED push-buttons. Radio Remote Control ALD-switch against accidental demagnetisation in the Air. Protection Bar.

The unmistakable advantages of the load lifting magnets Elift from Assfalg are economy and fast handling. The hand-operated permanent load lifting magnet is the perfect and fully developed solution for moving all ferromagnetic materials in an efficient, safe and reliable way. Usage during lifting and transportation includes a variety of flat and round workpieces, from pre-processed materials to raw material. A wide range of models of the Elift lifting magnets are available with bearing loads between 100 kg and 5000 kg for different material thicknesses. The Elift has become an irreplaceable helper in many areas of application. ASSFALG offers an additional ring eyelet for the Elift 300 and Elift 500 allowing vertical transportation. We would be happy to perform an annual safety inspection of your magnets. All technical data can be found in the .pdf file.