Results for
ABES S.À R.L. PUBLIC DESIGN
Luxembourg
ABES Tree-Stand 936 is a cylindrical stand with three locking screws in the upper area to hold a tree. Mounting Removable with 3p-Technology (empty ground shell can be covered with ground shell cover), comprising a 300 mm ground shell, junction piece WITHOUT predetermined breaking point, 1 clamping cone with internal thread, 1 clamping cone without internal thread and a hex head bolt as a standard. Other ABES products with 3p-Technology can be mounted on the same ground shell. Finish – Steel ST37, hot-dip galvanised with powder coating in standard RAL colours or DB 703 – Other colours available on request at a surcharge ABES Tree-Stand 936 with 3p-Technology : – Measurements (H above the ground x Ø in mm): 390 x 133 – Ground shell 300 mm (000.001), cast iron, galvanised – Junction piece WITHOUT predetermined breaking point (000.034), cast iron, galvanised – Clamping bolt set, hex head (N1+N2+hex-screw), stainless steel 1.4301 (000.004)
Request for a quoteABES S.À R.L. PUBLIC DESIGN
Luxembourg
ABES Lighting-Bollard 266 LED is a square steel bollard with a flat top and a vertical LED light strip (650 mm) on two opposite sides. Each with 2 LED strips, Perspex (PMMA) diffuser, operated using 24 V low voltage, 2 m connector cable with plug socket at the base of the bollard. Protection type IP 67. Mounting – With 3p-Technology. – The Connection, including all technical requirements, is delivered by the client and is not included in this package. Finish – Steel ST37, galvanised with powder coating in standard RAL colours or DB 703 – The height can be adjusted individually. – A ground rosette is part of the delivery. Completely covers the ground shell. Technical information – Light unit: 2 LED strip (650 mm) – Power supply: 24 Volt DC – Power input (max.): approx. 19 W – Luminous flux (max.): approx. 1170 lm – Reflected beam angle: 120° – Light colour: RGB + 4000 K – Protection type: IP 67
Request for a quoteABES S.À R.L. PUBLIC DESIGN
Luxembourg
ABES Bollard 066 is a rectangular steel barrier with slightly rounded corners and a flat, square header piece. Mounting Removable with 3p-Technology. Alternative: concrete embedment. Finish – Steel ST37, hot-dip galvanised with powder coating in standard RAL colours or DB 703 The basic package for ABES Bollard 066 with 3p-Technology contains: – The bollard, hot-dip galvanised steel ST37 with powder coating in standard RAL colours or DB 703 – Measurements (H above the ground x Ø in mm): 900 x 70/70 – Ground shell 300 mm (000.001), cast iron, galvanised – Junction piece (000.008), cast iron, galvanised – Clamping bolt set, hex head (N1+N2+hex-screw), stainless steel 1.4301 (000.004) – Ground rosette (Completely covers the ground shell)
Request for a quoteABES S.À R.L. PUBLIC DESIGN
Luxembourg
ABES Bollard 059 is a square bollard made from flat steel with two open sides, a horizontal divider in the middle, and a solid base. Mounting Removable with 3p-Technology. Alternative: concrete embedment. Finish – Steel ST37, hot-dip galvanised with powder coating in standard RAL colours or DB 703 The basic package for ABES Bollard 059 with 3p-Technology contains: – The bollard, hot-dip galvanised steel ST37 with powder coating in standard RAL colours or DB 703 – Measurements (H above the ground x Ø in mm): 900 x 80/80 – Ground shell 300 mm (000.001), cast iron, galvanised – Junction piece (000.008), cast iron, galvanised – Clamping bolt set, hex head (N1+N2+hex-screw), stainless steel 1.4301 (000.004) – Ground rosette (Completely covers the ground shell)
Request for a quoteABES S.À R.L. PUBLIC DESIGN
Luxembourg
ABES Bollard 076-20 is a cylindrical bollard made from galvanised steel with slightly curved top. Mounting Removable with 3p-Technology. Alternative: concrete embedment. Optional: with flange to enable screwing. Finish – Steel ST37, hot-dip galvanised with powder coating in standard RAL colours or DB 703 – Suitable for multipurpose clips to fasten signs, bins, dog waste containers etc. – The height can be adjusted individually The basic package for ABES Bollard 076-20 with 3p-Technology contains: – The bollard, hot-dip galvanised steel ST37 with powder coating in standard RAL colours or DB 703 – Measurements (H above the ground x Ø in mm): 952 x 76 – Ground shell 300 mm (000.001), cast iron, galvanised – Junction piece (000.008), cast iron, galvanised – Clamping bolt set, hex head (N1+N2+hex-screw), stainless steel 1.4301 (000.004) – Ground rosette (Completely covers the ground shell)
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
ABES S.À R.L. PUBLIC DESIGN
Luxembourg
ABES Bollard 076-30 is a cylindrical bollard made from galvanised steel with round top. Mounting Removable with 3p-Technology. Alternative: concrete embedment. Optional: with flange to enable screwing. Finish – Steel ST37, hot-dip galvanised with powder coating in standard RAL colours or DB 703 – Suitable for multipurpose clips to fasten signs, bins, dog waste containers etc. – The height can be adjusted individually The basic package for ABES Bollard 076-30 with 3p-Technology contains: – The bollard, hot-dip galvanised steel ST37 with powder coating in standard RAL colours or DB 703 – Measurements (H above the ground x Ø in mm): 980 x 76 – Ground shell 300 mm (000.001), cast iron, galvanised – Junction piece (000.008), cast iron, galvanised – Clamping bolt set, hex head (N1+N2+hex-screw), stainless steel 1.4301 (000.004) – Ground rosette (Completely covers the ground shell)
Request for a quoteABES S.À R.L. PUBLIC DESIGN
Luxembourg
ABES Bollard 076-40 is a cylindrical bollard made from galvanised steel with spherical top. Mounting Removable with 3p-Technology. Alternative: concrete embedment. Optional: with flange to enable screwing. Finish – Steel ST37, hot-dip galvanised with powder coating in standard RAL colours or DB 703. – Suitable for multipurpose clips to fasten signs, bins, dog waste containers etc. – The height can be adjusted individually The basic package for ABES Bollard 076-40 with 3p-Technology contains: – The bollard, hot-dip galvanised steel ST37 with powder coating in standard RAL colours or DB 703 – Measurements (H above the ground x Ø in mm): 1020 x 76 – Ground shell 300 mm (000.001), cast iron, galvanised – Junction piece (000.008), cast iron, galvanised – Clamping bolt set, hex head (N1+N2+hex-screw), stainless steel 1.4301 (000.004) – Ground rosette (Completely covers the ground shell)
Request for a quoteABES S.À R.L. PUBLIC DESIGN
Luxembourg
ABES Bollard 076-10 is a cylindrical bollard made from galvanised steel with flat top. Mounting Removable with 3p-Technology. Alternative: concrete embedment. Optional: with flange to enable screwing. Finish – Steel ST37, hot-dip galvanised with powder coating in standard RAL colours or DB 703. – Suitable for multipurpose clips to fasten signs, bins, dog waste containers etc. – The height can be adjusted individually The basic package for ABES Bollard 076-10 with 3p-Technology contains: – The bollard, hot-dip galvanised steel ST37 with powder coating in standard RAL colours or DB 703 – Measurements (H above the ground x Ø in mm): 940 x 76 – Ground shell 300 mm (000.001), cast iron, galvanised – Junction piece (000.008), cast iron, galvanised – Clamping bolt set, hex head (N1+N2+hex-screw), stainless steel 1.4301 (000.004) – Ground rosette (Completely covers the ground shell)
Request for a quoteResults for
Ground cover - Import exportNumber of results
9 ProductsCountries
Company type