Results for
ABES S.À R.L. PUBLIC DESIGN
Luxembourg
ABES Bicycle-Stand 472 is a bike rail with knee rail and rounded edges made from 80 x 10 mm bent flat steel. Additional material thicknesses, heights and widths available upon request and at a surcharge. Mounting Concrete embedment Alternative: version with two flanges to enable screwing Finish – Stainless steel 1.4301 pickled and smoothed, grain 240. Optional: electropolished/high-gloss (no surcharge) – Steel ST37, galvanised with powder coating in standard RAL colours or DB 703 – Other colours available on request at a surcharge ABES Bicycle-Stand 472 overview: Bicycle Stand, steel ST37, galvanised/powder-coated or stainless steel 1.4301 – Flat steel 80 x 10 mm – Height above ground: 850 mm – Full height: 1100 mm – Width: 800 mm
Request for a quoteABES S.À R.L. PUBLIC DESIGN
Luxembourg
ABES Bicycle-Stand 450-2 is a frame made from bent steel tubes with a 42,4 x 2,5 mm diameter, an overhanging rear pipe, as well as mutually offset pipe ends. Only one foundation is required. Optional: convex cover plate with a 300 mm diameter. Mounting Concrete embedment (only one foundation required). Finish – Stainless steel 1.4301 pickled and smoothed, electropolished to customer’s requirement (high-gloss) – surcharge. – Hot-dip galvanised steel ST37, alternatively with powder coating in standard RAL colours or DB 703. – Other colours available on request at a surcharge. Note: For the removable version, the cover plate is needed. Overview: – Pipe diameter: 42,4 x 2,5 mm – Measurments: (H above ground x L x B in mm): 845 x 1240 x 244 – Optional: convex cover plate with a 300 mm diameter
Request for a quoteABES S.À R.L. PUBLIC DESIGN
Luxembourg
U-rack made from perpendicular steel profiles with an integrated LED bar unterneath the crossbar. Other dimensions are available upon request. Mounting Concrete embedment or removable with ground shells or screw-on. Finish – Stainless steel 1.4301 pickled and smoothed, electropolished (high-gloss) – surcharge. – Hot-dip galvanised steel ST37, additionally with powder coating in standard RAL colours or DB 703. Overview: Bicycle Stand, stainless steel, galvanised steel or powder coated – Height above ground: 860 mm – Full height: 1210 mm – Width: 820 mm – LED-bar (approx. 24,5 x 770 mm) – Power supply: 24 V DC – Power input: approx. 6,7 W – Luminous flux: approx. 560 lm – Reflected beam angle: 120° – Light colour: 4000 K – Light transmission: CRI >80 – Protection type: IP 67 – Connection cable: approx. 1 m with IP 67 plug The Connection, including all technical requirements, is delivered by the client and is not included in this package.
Request for a quoteABES S.À R.L. PUBLIC DESIGN
Luxembourg
ABES Bicycle Stand 452 is a modular rack row system consisting of two or three U-rack steel tube racks with a tube diameter of 42.4 mm × 2.5 mm, bolted onto two flat bars which can be assembled in rows. Holes for ground anchor bolts provided. Mounting Screw fixing at +/- 0 mm. Finish – Stainless steel 1.4301 smoothed, grain 240. Optional: electropolished/high-gloss. – Steel S235, galvanised with powder coating in standard RAL colours or DB 703. – Other colours available on request at a surcharge. – Tube dimensions, heights and widths other than specified are available on request and at an additional cost. – Optionally with knee rail. Larger rack row systems can be realized with “Adapter plates for row connection“.
Request for a quoteABES S.À R.L. PUBLIC DESIGN
Luxembourg
ABES Bicycle-Stand 450-1 is a frame made from bent steel tubes with a 42,4 x 2,5 mm diameter, a vertical rear tube, and mutually offset tube ends. Only one foundation is required. Optional: convex cover plate with a 300 mm diameter. Mounting Concrete embedment (only one foundation required). Finish – Stainless steel 1.4301 pickled and smoothed, electropolished to customer’s requirement (high-gloss) – surcharge. – Hot-dip galvanised steel ST37, alternatively with powder coating in standard RAL colours or DB 703. – Other colours available on request at a surcharge. Note: For the removable version, the cover plate is needed. Overview: – Pipe diameter: 42,4 x 2,5 mm. – Measurments: (H above ground x L x B in mm): 845 x 683 x 244. – Optional: convex cover plate with a 300 mm diameter.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
ABES S.À R.L. PUBLIC DESIGN
Luxembourg
ABES Bicycle Stand 450-1 rack row system is a configuration of two or three adjacent bars made of bent steel tube with tube diameter of 42.4 × 2.5 mm, a vertical rear tube run, and with staggered tube ends. Each bar is welded at an angle of 90° (45° on request) to the curved base plate which can be assembled in rows at both ends. Mounting Screw fixing at +/- 0 mm. Finish – Stainless steel 1.4301 smoothed, grain 240. Optional: electropolished/high-gloss. – Steel S235, galvanised with powder coating in standard RAL colours or DB 703. – Other colours available on request at a surcharge. Larger rack row systems can be realized with “Adapter plate for row connection“.
Request for a quoteABES S.À R.L. PUBLIC DESIGN
Luxembourg
ABES Bicycle-Stand 471 is a bike rail with rounded edges made from 60 x 12 mm flat steel. A knee rail, as well as other tube dimensions, heights and widths available upon request and at a surcharge. Mounting Concrete embedment Alternative: version with two flanges to enable screwing Option: removable with ground shells Finish – Stainless steel 1.4301 pickled and smoothed, grain 240. Optional: electropolished/high-gloss (no surcharge) – Steel ST37, galvanised with powder coating in standard RAL colours or DB 703 – Other colours available on request at a surcharge – Optionally with knee rail ABES Bicycle-Stand 471 overview: Bicycle Stand, steel ST37, galvanised/powder-coated or stainless steel 1.4301 – Flat steel 60 x 12 mm – Height above ground: 800 mm – Full height: 1150 mm – Width: 800 mm
Request for a quoteABES S.À R.L. PUBLIC DESIGN
Luxembourg
ABES Bicycle-Stand 451 is a frame made from bent steel tubes with a 42.4 x 2.5 mm diameter, a vertical rear tube, parallel tube ends. Only one foundation is required. Optional: convex cover plate with a 300 mm diameter. Mounting Concrete embedment (only one foundation required). Finish · Stainless steel 1.4301 pickled and smoothed, electropolished to customer’s requirement (high-gloss) – surcharge. · Hot-dip galvanised steel ST37, alternatively with powder coating in standard RAL colours or DB 703. · Other colours available on request at a surcharge. Note: For the removable version, the cover plate is needed. ABES Bicycle-Stand 451 overview: – Pipe diameter: 42,4 x 2,5 mm. – Measurments: (H above ground x L x B in mm): 855 x 340 x 290 – Optional: convex cover plate with a 300 mm diameter
Request for a quoteResults for
It rack - Import exportNumber of results
9 ProductsCountries
Company type
Category