Results for
ABES S.À R.L. PUBLIC DESIGN
Luxembourg
ABES Bicycle-Stand 450-2 is a frame made from bent steel tubes with a 42,4 x 2,5 mm diameter, an overhanging rear pipe, as well as mutually offset pipe ends. Only one foundation is required. Optional: convex cover plate with a 300 mm diameter. Mounting Concrete embedment (only one foundation required). Finish – Stainless steel 1.4301 pickled and smoothed, electropolished to customer’s requirement (high-gloss) – surcharge. – Hot-dip galvanised steel ST37, alternatively with powder coating in standard RAL colours or DB 703. – Other colours available on request at a surcharge. Note: For the removable version, the cover plate is needed. Overview: – Pipe diameter: 42,4 x 2,5 mm – Measurments: (H above ground x L x B in mm): 845 x 1240 x 244 – Optional: convex cover plate with a 300 mm diameter
Request for a quoteABES S.À R.L. PUBLIC DESIGN
Luxembourg
ABES Bicycle-Stand 471 is a bike rail with rounded edges made from 60 x 12 mm flat steel. A knee rail, as well as other tube dimensions, heights and widths available upon request and at a surcharge. Mounting Concrete embedment Alternative: version with two flanges to enable screwing Option: removable with ground shells Finish – Stainless steel 1.4301 pickled and smoothed, grain 240. Optional: electropolished/high-gloss (no surcharge) – Steel ST37, galvanised with powder coating in standard RAL colours or DB 703 – Other colours available on request at a surcharge – Optionally with knee rail ABES Bicycle-Stand 471 overview: Bicycle Stand, steel ST37, galvanised/powder-coated or stainless steel 1.4301 – Flat steel 60 x 12 mm – Height above ground: 800 mm – Full height: 1150 mm – Width: 800 mm
Request for a quoteABES S.À R.L. PUBLIC DESIGN
Luxembourg
ABES Bicycle-Stand 451 is a frame made from bent steel tubes with a 42.4 x 2.5 mm diameter, a vertical rear tube, parallel tube ends. Only one foundation is required. Optional: convex cover plate with a 300 mm diameter. Mounting Concrete embedment (only one foundation required). Finish · Stainless steel 1.4301 pickled and smoothed, electropolished to customer’s requirement (high-gloss) – surcharge. · Hot-dip galvanised steel ST37, alternatively with powder coating in standard RAL colours or DB 703. · Other colours available on request at a surcharge. Note: For the removable version, the cover plate is needed. ABES Bicycle-Stand 451 overview: – Pipe diameter: 42,4 x 2,5 mm. – Measurments: (H above ground x L x B in mm): 855 x 340 x 290 – Optional: convex cover plate with a 300 mm diameter
Request for a quoteABES S.À R.L. PUBLIC DESIGN
Luxembourg
ABES Bicycle-Stand 473 are two, three or four adjacent 453 bike rails made from perpendicular steel profiles (50 × 20 mm), welded onto two flattened steel bars. Other profile dimensions, heights and widths are available upon request at a surcharge. Mounting Screw-on Finish – Stainless steel 1.4301 pickled and smoothed, grain 240. Optional: electropolished/high-gloss (no surcharge) – Steel ST37, galvanised with powder coating in standard RAL colours or DB 703 – Other colours available on request at a surcharge – Also available with LED strip on the underside of the cross tube or with knee rail ABES Bicycle-Stand 473 overview: Bicycle Stand, steel ST37, galvanised/powder-coated or stainless steel 1.4301 – Rectangular profile 50 × 20 mm mitre-cut, welded onto two flattened steel bars – Height above ground: 860 mm – Width (rail): 820 mm – Length: 750 (2) / 1.450 (3) / 2.100 (4) mm
Request for a quoteABES S.À R.L. PUBLIC DESIGN
Luxembourg
ABES Bicycle-Stand 472 is a bike rail with knee rail and rounded edges made from 80 x 10 mm bent flat steel. Additional material thicknesses, heights and widths available upon request and at a surcharge. Mounting Concrete embedment Alternative: version with two flanges to enable screwing Finish – Stainless steel 1.4301 pickled and smoothed, grain 240. Optional: electropolished/high-gloss (no surcharge) – Steel ST37, galvanised with powder coating in standard RAL colours or DB 703 – Other colours available on request at a surcharge ABES Bicycle-Stand 472 overview: Bicycle Stand, steel ST37, galvanised/powder-coated or stainless steel 1.4301 – Flat steel 80 x 10 mm – Height above ground: 850 mm – Full height: 1100 mm – Width: 800 mm
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
ABES S.À R.L. PUBLIC DESIGN
Luxembourg
ABES Bicycle-Stand 470 is a bike rail made from a bent steel tube with a tube diameter of 48 mm. A knee rail, as well as other tube dimensions, heights and widths available upon request and at a surcharge. Mounting Concrete embedment Alternative: version with two flanges to enable screwing Finish – Stainless steel 1.4301 pickled and smoothed, grain 240. Optional: electropolished/high-gloss (no surcharge) – Steel ST37, galvanised with powder coating in standard RAL colours or DB 703 – Other colours available on request at a surcharge – Optionally with knee rail ABES Bicycle-Stand 470 overview: Bicycle Stand, steel ST37, galvanised/powder-coated or stainless steel 1.4301 – Bent steel tube with a tube diameter of 48 mm – Height above ground: 860 mm – Full height: 1.160 mm – Width: 860 mm
Request for a quoteABES S.À R.L. PUBLIC DESIGN
Luxembourg
ABES Bicycle Stand 452 is a modular rack row system consisting of two or three U-rack steel tube racks with a tube diameter of 42.4 mm × 2.5 mm, bolted onto two flat bars which can be assembled in rows. Holes for ground anchor bolts provided. Mounting Screw fixing at +/- 0 mm. Finish – Stainless steel 1.4301 smoothed, grain 240. Optional: electropolished/high-gloss. – Steel S235, galvanised with powder coating in standard RAL colours or DB 703. – Other colours available on request at a surcharge. – Tube dimensions, heights and widths other than specified are available on request and at an additional cost. – Optionally with knee rail. Larger rack row systems can be realized with “Adapter plates for row connection“.
Request for a quoteABES S.À R.L. PUBLIC DESIGN
Luxembourg
ABES Bicycle-Stand 454 is a two bent U-shaped frames made from steel tubes and welded onto a steel sheet, opening out frontwards and used to hold a bicycle tyre. NOTE: Frame piece(s) only. A cylindrical bollard must be added separately. Mounting To be screwed on a cylindrical ABES bollard (e.g. ABES Bollard 043), removable with 3p-Technology, comprising a ground shell, a junction piece with integrated breaking point, two clamping cones and a hex head bolt. Alternative: concrete embedment. Finish – Hot-dip galvanised steel ST37, alternatively with powder coating in standard RAL colours or DB 703. – Other colours available on request at a surcharge.
Request for a quoteABES S.À R.L. PUBLIC DESIGN
Luxembourg
ABES Bicycle-Stand 450-1 is a frame made from bent steel tubes with a 42,4 x 2,5 mm diameter, a vertical rear tube, and mutually offset tube ends. Only one foundation is required. Optional: convex cover plate with a 300 mm diameter. Mounting Concrete embedment (only one foundation required). Finish – Stainless steel 1.4301 pickled and smoothed, electropolished to customer’s requirement (high-gloss) – surcharge. – Hot-dip galvanised steel ST37, alternatively with powder coating in standard RAL colours or DB 703. – Other colours available on request at a surcharge. Note: For the removable version, the cover plate is needed. Overview: – Pipe diameter: 42,4 x 2,5 mm. – Measurments: (H above ground x L x B in mm): 845 x 683 x 244. – Optional: convex cover plate with a 300 mm diameter.
Request for a quoteABES S.À R.L. PUBLIC DESIGN
Luxembourg
ABES Bicycle-Stand 453 is a U-rack made from perpendicular steel profiles. Other profile dimensions, heights and widths are available upon request at a surcharge. An assembly model is available. Mounting Concrete embedment or removable with ground shells or screw-on. Finish – Stainless steel 1.4301 pickled and smoothed, electropolished to customer’s requirement (high-gloss) – surcharge. – Hot-dip galvanised steel ST37, additionally with powder coating in standard RAL colours or DB 703. – Other colours available on request at a surcharge. ABES Bicycle-Stand 453 overview: – Rectangular tube 50 x 20 mm – Height above ground: 860 mm – Full height: 1210 mm – Width: 820 mm
Request for a quoteABES S.À R.L. PUBLIC DESIGN
Luxembourg
ABES Bicycle Stand 450-1 rack row system is a configuration of two or three adjacent bars made of bent steel tube with tube diameter of 42.4 × 2.5 mm, a vertical rear tube run, and with staggered tube ends. Each bar is welded at an angle of 90° (45° on request) to the curved base plate which can be assembled in rows at both ends. Mounting Screw fixing at +/- 0 mm. Finish – Stainless steel 1.4301 smoothed, grain 240. Optional: electropolished/high-gloss. – Steel S235, galvanised with powder coating in standard RAL colours or DB 703. – Other colours available on request at a surcharge. Larger rack row systems can be realized with “Adapter plate for row connection“.
Request for a quoteResults for
Bicycles - Import exportNumber of results
12 ProductsCountries
Company type
Category