Results for
RIEGLER & CO.KG
Germany
Our assortment of threaded screw fittings ranges from connectors, double threaded nipples, counter nuts and bushings to reducing nipples, pipe double nipples, hose sleeves and pivoting bushings and up to bulkhead fittings, union nuts, extension pieces, end caps and locking screws. We also offer various fittings made of steel and malleable cast iron as well as assortment boxes with a chosen selection of screw fittings.
Request for a quoteNORELEM FRANCE
France
Quick and easy lifting device with swing shackle and safety bar against unintended release. The balls are unlocked by pressing the push button. When the push button is released the balls are securely locked. Corrosion and weather resistant. High tensile, hardened pin for extreme loads with the high wear resistance. Temperature range max. 250 °C. CE certified. Values X max, and F1 with 5x safety factor. Accessory: Receiver bushes 07784.
Request for a quoteNORELEM FRANCE
France
Ball lifting pins are quick and simple lifting devices with swing shackles. The balls are unlocked by pressing the push button. After releasing the push button, the ball is securely locked. Protected against corrosion and weather-resistant High-strength, hardened, extremely durable pin. TÜV-tested. Values X min., F1, F2 and F3 with 5x safety factor.
Request for a quoteMING XIAO MANUFACTURING CO., LTD
China
Hexagon Flange Self-lock Nuts M5-M16 Materials: Class 4.8 (normal), Class 8.8 (customized) Finished: Zinc plated Origin: China
Request for a quoteMING XIAO MANUFACTURING CO., LTD
China
M3 - M 24 Materials: Class 4.8,Class 8,SS304,SS316 Standard:DIN 980
Request for a quoteSHANGHAI GAOHE IMP. & EXP. CO., LTD.
China
A nylon insert lock nut is a fastener that incorporates a nylon component to effectively lock the nut into position on the bolt. The nylon component of the nyloc nut has a smaller inside diameter than the actual nut, thereby acting to lock the nut in place by squeezing the nylon firmly around the bo
Request for a quoteGEISSEL
Germany
wege® - the flexible cable gland system in brass, stainless steel and plastic. material: brass nickel-plated, thread M10 - M75, PG 7 - PG 48, G1/4" - G5", BSC
Request for a quoteGEISSEL
Germany
wege® - the flexible cable gland system in brass, stainless steel and plastic. material: PA 6 GF, colour: light grey (RAL 7035), range of temperature: -20 °C to +110 °C, thread M12-M63, PG7-PG48, additional information: available colours are also light grey ( RAL 7035) and jet black (RAL 9005)
Request for a quoteGEISSEL
Germany
wege® - the flexible cable gland system in brass, stainless steel and plastic. Accessories. material: stainless steel AISI 303, thread M12-M63
Request for a quoteGEISSEL
Germany
wege® - the flexible cable gland system in brass, stainless steel and plastic. Accessories. material: brass nickel-plated, thread M12-M63, PG7-PG36
Request for a quoteGEISSEL
Germany
wege® - the flexible cable gland system in brass, stainless steel and plastic. Accessories. material: stainless steel AISI 316 Ti, thread M12-M63
Request for a quotePEEKCHINA CO., LTD.
China
Upgrade your fastening capabilities with our range of carbon PEEK locking accessories. These high-performance components are designed to provide durable and lightweight solutions for secure fastening. With reliable locking mechanisms, they effectively resist vibration and maintain a strong grip even in demanding environments. The temperature and chemical resistance of PEEK make these accessories suitable for a wide range of applications. Reinforced with carbon fiber, they offer enhanced strength and durability. Whether you're in aerospace, automotive, or industrial sectors, our carbon PEEK locking accessories deliver exceptional performance to meet your fastening needs. Carbon PEEK locking nuts stands for carbon filled polyetheretherketone, which is a high-performance thermoplastic material known for its excellent mechanical and chemical properties. Carbon PEEK locking nuts are typically made by combining PEEK with carbon fiber reinforcement.
Request for a quoteACTON S.A.
France
Recommended for light assembly
Request for a quoteACTON S.A.
France
Recommended for light assembly
Request for a quoteACTON S.A.
France
Hexagonal self-locking nuts - All metal (ECR INDESS All metal / STOVER) A4 stainless steel - DIN 980 TYPE (DIN 934 base) There is a variant in A2 stainless steel
Request for a quoteACTON S.A.
France
Self-locking Blind Nuts With Nylon Ring (ECR Blind AF) Stainless Steel A2 - DIN 986
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
KEBA FASTENINGS
Germany
is the most secure self-locking fastening solution for extreme vibration condistions utilized by a unique wedge principle. Unmatched locking strength Reusable design without effecting performance Easy installation – only a wrench is required Clamp load is preserved for all applications Drastically reduced labor costs associated with re-tightening Available in a wide array of materials and coatings
Request for a quoteNORELEM FRANCE
France
Keyless locking coupling with low mass and moment of inertia. Easy to connect and release – no jamming on the shaft. Perfect for zero backlash connections. Excellent concentricity and running. Suitable for keyed and keyless shafts. for shaft diameters from 5 to 35 mm for high torques minimum axial offset when mounting selfcentring Assembly Shaft and hub must be free of oil, grease and dirt. Do not lubricate keyless locking coupling. Insert keyless locking coupling in the hub seat and slide onto shaft. Tighten nut by hand and use a torque wrench to tighten to the defined tightening torque. Tolerances Shaft diameter and hub hole Form A ±0.04 mm. Form B ±0.08 mm. Surface quality Rz ≤ 16 µm.
Request for a quoteNORELEM FRANCE
France
When screwing the nuts onto the thread, the thread lock is plastically and elastically deformed. The elastic deformation causes a radial frictional lock against the nuts being loosened. The plastic thread lock is only effective when the nuts are fully screwed onto the male thread. The screw length must be selected so that at least two full threads protrude from the nut. Due to the plastic deformation of the thread lock, these nuts should only be used once.
Request for a quoteBÄCKER GMBH & CO. KG
Germany
PLACOGRIP® High quality index bolts for the most exacting demands INDEXING BOLT Stainless steel nickel plated SLEEVE Stainless steel KNOB Polyamide black Further RAL – or special colors upon request Also available with lock nuts DIN 439 for index bolts
Request for a quoteBÄCKER GMBH & CO. KG
Germany
PLACOGRIP® High quality index bolts compact, with stop, proper to small construction dimensions and thin walls INDEXING BOLT Stainless steel 1.4305 SLEEVE Steel gunmetal finish KNOB Polyamide black Further RAL – or special colors upon request PLEASE NOTE Particularly suited for screwing in thin-walled items In this version with stop the button is pulled out, rotated by 90° and secured by the notch Also available with lock nuts DIN 439 for index bolts
Request for a quoteBÜRKLE GMBH
Germany
The barrel pump's universal adapter fits onto container openings of 30 - 70 mm, closing tightly. The container screw joints can be screwed into the container with the 3/4" thread and lock nut. The gas-tight barrel pump enables odour-free transfer. During transfer with normal pumps, it is impossible to prevent vapours escaping into the atmosphere. The gas-shuttle method avoids this. Any vapours produced are returned from the container which is to be filled to the original container via the gas-shuttle pipe. The gas pipe and the liquid pipe are additionally provided with stopcocks. Gas-tight pumps are used for substances that have a strong smell such as ammonia.
Request for a quoteSCHMITTER HYDRAULIK GMBH
Germany
Angle joints DIN 71802 material: steel, galvanized construction CS with spigots and flat, hexagon nut and locking strap Category Low pressure hoses and fittings / Joint technology / Elbow joints / Joints complete / With right-handed thread / Steel Product number supplier 220136
Request for a quoteACE STOSSDÄMPFER GMBH
Germany
Self-Compensating Energy capacity 1.25 Nm/cycle Stroke 5 mm Ideal for compact, efficient designs: The MC5 to MC75 series impresses users with their reduced dimensions and their very short overall lengths and low resetting forces after braking. The outer body of each damper, produced from one solid piece, are filled with temperature stable oil, offer a continuous thread incl. a supplied lock nut and also have an integrated positive stop. These hydraulic machine elements from ACE, are ready for immediate installation and are maintenance-free. A comprehensive range of energy absorption with a wide range of effective weight potential are further benefits in these minature units. These miniature shock absorbers are perfectly suited to use in applications such as mechanical engineering, medical and electro-technology and robotics.
Request for a quoteACE STOSSDÄMPFER GMBH
Germany
Self-Compensating Energy capacity 1 Nm/cycle Stroke 5 mm Ideal for compact, efficient designs: The MC5 to MC75 series impresses users with their reduced dimensions and their very short overall lengths and low resetting forces after braking. The outer body of each damper, produced from one solid piece, are filled with temperature stable oil, offer a continuous thread incl. a supplied lock nut and also have an integrated positive stop. These hydraulic machine elements from ACE, are ready for immediate installation and are maintenance-free. A comprehensive range of energy absorption with a wide range of effective weight potential are further benefits in these minature units. These miniature shock absorbers are perfectly suited to use in applications such as mechanical engineering, medical and electro-technology and robotics.
Request for a quoteACE STOSSDÄMPFER GMBH
Germany
Self-Compensating Energy capacity 0.68 Nm/cycle Stroke 4 mm Ideal for compact, efficient designs: The MC5 to MC75 series impresses users with their reduced dimensions and their very short overall lengths and low resetting forces after braking. The outer body of each damper, produced from one solid piece, are filled with temperature stable oil, offer a continuous thread incl. a supplied lock nut and also have an integrated positive stop. These hydraulic machine elements from ACE, are ready for immediate installation and are maintenance-free. A comprehensive range of energy absorption with a wide range of effective weight potential are further benefits in these minature units. These miniature shock absorbers are perfectly suited to use in applications such as mechanical engineering, medical and electro-technology and robotics.
Request for a quoteZEMO VERTRIEBS GMBH
Germany
Needed to adjust SR Preset Torque Wrenches. The Combination Adjusting and Release Tool is essential to setting the torque on all SR torque wrenches using presetting. It fits and engages both the torque adjusting nut and the torque adjusting nut locknut, and does so either simultaneously or individually, as needed. The CART consists of a grip that controls a small hex key with a larger hex key surrounding the point of the smaller one. The smaller hex key fits the torque adjustment nut and the larger key fits the lock nut that holds the torque adjustment nut in place. Used together, the two keys in the CART make it easy to unlock the torque adjustment nut, make the needed adjustment, then lock the new torque setting in place. Ordering Information: R819117 = Combination Adjusting and Release Tool (CART)
Request for a quoteSCHMITTER HYDRAULIK GMBH
Germany
Angle joints DIN 71802 material: steel, galvanized construction CS with spigots and flat, hexagon nut and locking strap Category Low pressure hoses and fittings / Joint technology / Elbow joints / Joints complete / With right-handed thread / Steel Product number supplier 220136
Request for a quoteResults for
Locking nuts - Import exportNumber of results
102 ProductsCountries
Company type
Category