Loads - Import export

EL LOAD is an automated packing station for bulk products or packs. The products (cups, bottles and packs) can be: - Grouped, referenced and picked up when stationary - Synchronized / timed and picked-up in continuous movement (following the conveyor) Open boxes or boxes with flaps can be: - Loaded when stopped after referencing - Loaded in continuous movement (following the conveyor) EL LOAD is totally designed to be interfaced with any SYNERLINK machines.

We increase production speed by eliminating waiting times that reduce productivity in machine loading and unloading processes that do not require a high level of expertise. In addition we eliminate HSSE risks such as press feeding.

Paw-Pax Isothermal Bellows system is designed to connect the delivery vehicles with the building. With its modern and functional design, Paw-Pax provides maximum impermeability at the loading, unloading sections and shipping points of the facilities. Atmospheric conditions (rain, wind, cold, hot) minimize unwanted air currents in the Paw-Pax door area. With this feature, Paw-Pax isothermal bellows system minimizes problems such as energy loss, lack of hygiene and pollution, undesirable temperature changes that occur during shipment.

Hinged Vertical Ramp systems Manual or motorized loading ramps offer an ergonomic, economical and reliable solution. Hinged Vertical loading ramps, which act as a bridge between your facility and the truck bed, offer ease of use and zero energy cost (in the manual system). Ease of use can be increased to a higher level by adding a motor system to the manual ramp system, optionally.

Designed for use with 3 and 4 wheel forklift trucks. Electro-hydraulic lifting, telescopic lip Side safety rails 24cm high, retractable Hot-dip galvanized grating non-slip running surface IP65 control panels Applications: The EASY-ST model is very popular with logisticians and industrialists, it allows you to integrate your loading ramps in the pit, thus allowing the optimization of circulation spaces.

Designed for use with 3 and 4 wheel forklift trucks. Electro-hydraulic lifting, telescopic lip Side safety rails 24cm high, retractable Hot-dip galvanized grating non-slip running surface IP65 control panels Applications: The EASY-ST model is very popular with logisticians and industrialists, it allows you to integrate your loading ramps in the pit, thus allowing the optimization of circulation spaces.

Designed for use with 3 and 4 wheel forklift trucks. Electro-hydraulic lifting, telescopic lip Side safety rails 24cm high, retractable Hot-dip galvanized grating non-slip running surface IP65 control panels Applications: The EASY-ST model is very popular with logisticians and industrialists, it allows you to integrate your loading ramps in the pit, thus allowing the optimization of circulation spaces.

Designed for use with 3 and 4 wheel forklift trucks. Electro-hydraulic lifting, telescopic lip Side safety rails 24cm high, retractable Hot-dip galvanized grating non-slip running surface IP65 control panels Applications: The EASY-ST model is very popular with logisticians and industrialists, it allows you to integrate your loading ramps in the pit, thus allowing the optimization of circulation spaces.

Specially designed for industrial use, its use on "coated" or "Mac Adam" type surfaces will be very effective. Loading / Unloading trucks of Plateau or Tautliner type, AZ RAMP - PRIME XS range is made of heavy steel, hot dip galvanized. Its full access platform will allow you easy access to all types of material handling equipment, including 3-wheel electric forklifts.

Specially designed for industrial use, its use on "coated" or "Mac Adam" type surfaces will be very effective. Loading / Unloading trucks of Plateau or Tautliner type, AZ RAMP - PRIME XS range is made of heavy steel, hot dip galvanized. Its full access platform will allow you easy access to all types of material handling equipment, including 3-wheel electric forklifts.

Hot Galvanized Notched Tray, Anti-Slip 2 Lashing Chains, 2 Adjustable Support Stands, 120 mm Side Safety Rails Slopes: Min: 16.94 % - Max: 24.57 % Applications: Specially designed for industrial use, its use on "coated" or "Mac Adam" type surfaces will be very effective. Loading / Unloading trucks of Plateau or Tautliner type, AZ RAMP - PRIME XS range is made of heavy steel, hot dip galvanized. Its full access platform will allow you easy access to all types of material handling equipment, including 3-wheel electric forklifts.

Due to their extremely compact design, these load cells can be used wherever static or dynamic load forces have to be measured in very tight spaces. Model 8416 is perfect for use in micro-technology and just as suitable for measuring tasks in the research and development sector. The ultra-miniature compression load cell model 8416 is a flat, circular disc, the bottom of which is sealed with a cover. The load application button for receiving the compression forces is an integrated part of the sensor. The sensor element inside the body carries a strain gage full bridge which outputs voltage directly proportional to the measurement variable upon application of force. The short nominal measurement distance of the ultra-miniature compression load cells due to their design provides a high degree of rigidity. If needed, the nominal characteristic value can be standardized in the sensor connection cable.

Specially designed for tank and hopper weighing, hybrid scales and high-precision dosing systems. For use in EX zones 1, 2, 20, 21, 22 and FM DIV 1. Ultra-high precision load cell for batching applications Load cell capacity range from 100 kg to 3 t Accuracy class: D1 (0.04 %), C3 (0.015 %), C6 (0.008 %) Corresponding mounting kit: PR 6046

Ideal for installation in checkweighers: The single point load cell U2D1 is ideal for dynamic applications due to its design. Suitable for load ranges from 3 kg to 100 kg and a platform size of up to 200 mm × 200 mm.

The PR 6202 is the world's first load cell designed strictly in accordance with the hygienic design principles developed by the European Hygienic Engineering Design Group (EHEDG). Proven rocker-pin principle Easy corner adjustment by matched load cell output Full stainless steel construction Wide temperature range High overload capacity Resistant against vibrations Hermetically sealed, IP68 (depth of 1.5 m for 10,000 hrs.), IP69K Ex-version available (PR 6202/..E) W&M approval (acc. OIML R 60)

The MP 79/79T Bending Beam Weigh Cell is made from stainless steel and is available in a load range from 227 kg to 5099 kg. This weigh cell is specially designed for use in weighing platforms and simple hopper weighing applications. Protection class IP68, IP69K For economic vessel weighing solutions Hermetically welded IP68/IP69 Load cell capacity range from 227 kg to 5.099 kg Accuracy class: 0.02 % Corresponding mounting kits

Ideal for installation in platform scales and integration into machines: with the CB17 single point load cell, you rely on proven quality from a leading manufacturer of industrial weighing technology. Suitable for load ranges from 600 g to 3 kg and a platform size of up to 200 mm × 200 mm.

The MP 55 Platform Weigh Cell is made completely from stainless steel, is available in a load range from 11 kg to 200 kg and platform sizes up to 600 mm x 600 mm. It is specially designed for integration into beltweighers, counting scales and checkweighers. Protection class IP68, IP69K Full stainless steel construction Hermetically welded seal (IP68, IP69K) Platform size up to 600 mm x 600 mm Approved to OIML R60 Ex-Version available (MP55/...E) High Input Impedance Integrated Mounting spacer

Ideal for integration in bench scales, counting scales and checkweighers: with the LC made from aluminium Single Point load cells, you can rely on the tried-and-tested quality of a leading manufacturer of industrial weighing technology. Suitable for load ranges of 5 kg to 750 kg and a platform size of up to 800 mm × 800 mm

The load cell PR 6212 is a state-of-the-art product. This corrosion resistant load cell has a compact design and also features high heat resistance. Its long product lifetime minimises downtime and ensures safer and more reliable processes in the chemical and steel industry. Compact design ensuring a low system height Maximum corrosion resistance High-temperature version available for up to 180 ˚C Load cell capacity range from 500 kg to 10 t Accuracy class: 0.04 % Corresponding mounting kit: PR 6012

Suspended mounting can better compensate for vessel movements. — Reliable weighing thanks to high resolution and accuracy class — Accuracy class: N (0,03%) and C3 (0,025%) — Specially designed for suspended vessel scales — Versatile optional weighing electronics Design-in support from specialists

secutex protective sleeves are vital when turning over coils. The lifting strap is attached to a crane hook and attached to the load with the secutex protective sleeve. During lifting, the strap moves freely through the protective sleeve while the latter remains motionless against the load. This means that turning the load 90° is possible without any problem whatsoever. If the load is paced to the other side according to the same principle, it can be also be turned by 180°. The lifting strap can slide through the protective sleeve during the turning process. The protective sleeve and load, however, remain in constant contact. Our tips for safe turning – The lifting strap is exactly at „12 o‘clock“ over the centre of the coil. – Only individual, unpackaged and cleanlywrapped coils may be turned. – A nonslip surface, such as the secutex turning mat (cf.p. 102] must be used. – The coil must be prevented from rolling in or sliding perpendicularly to the lifting strap.

Ideal for installation in platform scales and integration into machines: with the BCL-A single point load cell, you rely on proven quality from a leading manufacturer of industrial weighing technology. Suitable for load ranges from 300 g to 4.5 kg and a platform size of up to 300 mm × 300 mm.

Loading Bellows for: - closed loading (container, tank trucks) - open loading (lorries, ships) - mixed loading suitable for conveying products (powder, grain and fibre) from storage containers to container, tank trucks, lorries & ships. Available with or without integrated filter, with various equipment for different products, temperature ranges, ATEX etc.

With its flat construction this force sensor is specially designed to be fitted to a pedal. By this, the operator's forces for each respective action, for example brake tests, can be measured directly and the reaction of the vehicle or machine can be designated. This applies to real test drives, as well as in driving simulators. Due to the special construction of the membrane, it is irrelevant whether an upright or hanging pedal is concerned. The sensor is designed in a way that unavoidable lateral forces have as little impact on the measurement result as possible. Using a central internal thread on the control surface, various machine-related adaptor parts can be easily mounted. Because the pedal is convex-shaped on its surface, the pedal force sensor has a very rigid base plate and therefore can easily be applied to various geometrics. The mounting can even take place on a pedal with an elastomer covering.

Compression load cells from 100 kg to 5 t. Specially designed for tank and hopper weighing as well as basic dosing systems. For use in EX zones 1, 2, 20, 21, 22 and FM DIV 1. Ultra-high precision load cell for batching applications Load cell capacity range from 100 kg to 5 t Accuracy class: 0.04 % - 0.008 % Corresponding mounting kits

Load cell capacity range from 30 kg to 300 kg. Specially designed for tank and hopper weighing as well as basic dosing systems. For use in EX zones 1, 2, 20, 21, 22 and FM DIV 1. Compact design ensuring a low system height Accuracy class: 0.05 % Extreme wide temperature range Corresponding mounting kits

As digital weighing solution with the converter Connexx®, the load cell Inteco® offers fast signalling times and optimal transparency in dosing and weighing processes. With an output signal of 2 mV/V, load levels of up to 75 t, accuracy classes up to C6 and high-quality stainless steel, it has a wide range of potential applications. The versatile, innovative weighing solution for silo and vessel weighing Further development of the PR 6201 load cell NEW: Output signal of 2 mV/V NEW: additional load levels 60 t and 75 t NEW: Accuracy class (C6) from 3 t NEW: even higher corrosion resistance All accessories and installation kits of the PR 6201 load cell can still be used