Liquid paints - Import export

Filters made at our factory in Nantes (France) This filter uses the same principle than Standard Pleated Cardboard Filter with a polyester media sticked at the back in order to increase filtration efficiency for dry dusts. Advantages of this filter : - Lifetime up to 3-4 times longer than other filtering medias on the market - Better filtration efficiency than Standard Pleated Cardboard Filter - Easy installation and manipulation This filter can be used in all spray booths with horizontal and vertical airflow. Construction : This filter is made of 2 layers of recycled kraft paper, perforated, pleated and glued with a polyester media at the back. The quality of kraft paper (250g/m²) guaranties rigidity of the filter in all positions. Standard widths : - 1m - 0,90m - 0,75m Other dimensions and cuts on demand.

Filters made at our factory in Nantes (France) Standard Filtr’Overspray is well adapted to filtration of paint overspray in spray booths. It is easy to manipulate and to stock. Its lifetime, 6 times longer than other filtering medias on the market, allows to make important costs reductions. This filter is perfectly adapted to filtration of any wet overspray particles (paints, varnishes, gel coat, glue, silicone, polyester etc…) Advantages of this filter : - Lifetime up to 6 times longer than other filtering medias on the market - Easy installation and manipulation - Environment friendly materials according to ISO 14000 - Adapted to filtration of solvent paints and water based paints This filter can be used in all spray booth with horizontal and vertical airflow.

Eccentric screw pump tube HD-E Industryfor oils, paints and disposal liquids is available in the food version (Pure) The HD-E Eccentric screw pump in the industrial version transfers the advantages of the Drum pump low-viscosity media quite simply to the medium-viscosity range. The positive displacement pump has an easily detachable outer tube, a bearing head with mechanical seal and a free-running shaft with an eccentric screw as the pumping element - all easy to dismantle and clean. The Pump tube can be suitably combined with our single-phase motor. This ensures the draining of liquids and thus saves important resources. * also available in special immersion depths * Pump tube equipped with Lutz original hand wheel * Media examples: Oils, waste oils, disposal liquids, paints. * Smooth running * Uniform volume flow * Gentle, low-pulsation product conveying * Low wear * Easily detachable outer tube

The flowmeter with touchscreen display and backlighting convinces with its simple, demand-oriented display and operability, the multilingual interface and the compact design. Thanks to the rotating Oval gear meter and the magnets placed on the measuring wheels, it enables accurate measurement of the volume flow and at the same time measures non-flammable liquids such as Paints, lacquers, acids, alkalis, mineral oils, hydrocarbons and solvents as well as highly flammable liquids precisely, quickly and above all efficiently. * Optionally in explosion-proof design * Measurement according to the oval wheel principle * High measuring accuracy due to overtravel correction * Low pressure losses in the system * Touch screen display with self-explanatory, multilingual user interface * Relay module for quantity preselection can be retrofitted at any time * Approved according to ATEX Directive 2014/34/EU, category 2

The flow meter with touchscreen display and backlighting impresses with its simple, needs-based display and operability, multilingual interface and compact design. Thanks to the rotating oval wheel meters and the magnets placed on the measuring wheels, it enables precise measurement of the volume flow and measures non-flammable liquids such as paints, varnishes, acids, solvents, alkalis, mineral oils, hydrocarbons and highly flammable liquids precisely, quickly and, above all, efficiently. * Optionally available in an explosion-proof version Features & benefits * Measurement according to the oval gear principle * High measuring accuracy due to overrun correction * Low pressure loss in the system * Touchscreen display with self-explanatory, multilingual user interface * Relay module for volume preselection can be retrofitted at any time * Approved in accordance with ATEX Directive 2014/34/EU, Category 2

The first flow meter with touchscreen display and backlighting impresses with its needs-based display and operability, multilingual interface and compact design. Thanks to the rotating oval wheel meters and the magnets placed on the measuring wheels, it enables precise measurement of the volume flow and measures non-flammable liquids such as paints, varnishes, acids, solvents, alkalis, mineral oils, hydrocarbons and highly flammable liquids precisely, quickly and, above all, efficiently. * Optionally available in explosion-proof design Features & benefits * Measurement according to the oval gear principle * High measuring accuracy due to overrun correction * Low pressure losses in the system * Touchscreen display with self-explanatory, multilingual user interface * Relay module for volume preselection can be retrofitted at any time * Approved in accordance with ATEX Directive 2014/34/EU, Category 2

IFA Technology considers your individual requirements and builds customised plants and systems for the paint industry and the varnish industry. Our plants and systems for dosing liquids and solids in the paint and varnish industry offer high dosing accuracy and perfect reproducibility. We meet the high demands of our customers through the use of high-quality materials and precise workmanship. Application of plants and systems for the paint industry and the varnish industry: Storage, mixing, dosing and application of paints and varnishes Special dosing valves and dosing pumps for paints and varnishes

The flowmeter with touchscreen display and backlighting convinces with its simple, demand-oriented display and operability, the multilingual interface and the compact design. Thanks to the rotating Oval gear meter and the magnets placed on the measuring wheels, it enables accurate measurement of the volume flow and at the same time measures non-flammable liquids such as alkalis, paints, lacquers, mineral oils, solvents, hydrocarbons and solvents as well as highly flammable liquids precisely, quickly and above all efficiently. * Optionally in explosion-proof design * Measurement according to the oval wheel principle * High measuring accuracy due to overtravel correction * Low pressure losses in the system * Touch screen display with self-explanatory, multilingual user interface * Relay module for quantity preselection can be retrofitted at any time * Approved according to ATEX Directive 2014/34/EU, category 2

The flowmeter with touchscreen display and backlighting convinces with its simple, demand-oriented display and operability, the multilingual interface and the compact design. Thanks to the rotating Oval gear meter and the magnets placed on the measuring wheels, it enables accurate measurement of the volume flow and at the same time measures non-flammable liquids such as Paints, lacquers, mineral oils, acids, alkalis, mineral oils and solvents as well as highly flammable liquids precisely, quickly and above all efficiently. * Optionally in explosion-proof design * Measurement according to the oval wheel principle * High measuring accuracy due to overtravel correction * Low pressure losses in the system * Touch screen display with self-explanatory, multilingual user interface * Relay module for quantity preselection can be retrofitted at any time * Approved according to ATEX Directive 2014/34/EU, category 2

We manufacture products that not only perform exceptionally but also showcase a superior level of craftsmanship. We have expertise in a wide range of chemical and mechanical processes: - Electrostatic powder coating, - Liquid painting, - Anodizing (30-50 microns, black or grey), - Hard anodizing (30-50 microns, black or grey), - Zinc plating, - Yellow zinc chromate plating - Blackening (Black oxide coating) - cold or in oil, - Phosphating.

We manufacture products that not only perform exceptionally but also showcase a superior level of craftsmanship. We have expertise in a wide range of chemical and mechanical processes: - Electrostatic powder coating, - Liquid painting, - Anodizing (30-50 microns, black or grey), - Hard anodizing (30-50 microns, black or grey), - Zinc plating, - Yellow zinc chromate plating - Blackening (Black oxide coating) - cold or in oil, - Phosphating.

We manufacture products that not only perform exceptionally but also showcase a superior level of craftsmanship. We have expertise in a wide range of chemical and mechanical processes: - Electrostatic powder coating, - Liquid painting, - Anodizing (30-50 microns, black or grey), - Hard anodizing (30-50 microns, black or grey), - Zinc plating, - Yellow zinc chromate plating - Blackening (Black oxide coating) - cold or in oil, - Phosphating.

We manufacture products that not only perform exceptionally but also showcase a superior level of craftsmanship. We have expertise in a wide range of chemical and mechanical processes: - Electrostatic powder coating, - Liquid painting, - Anodizing (30-50 microns, black or grey), - Hard anodizing (30-50 microns, black or grey), - Zinc plating, - Yellow zinc chromate plating - Blackening (Black oxide coating) - cold or in oil, - Phosphating.

We manufacture products that not only perform exceptionally but also showcase a superior level of craftsmanship. We have expertise in a wide range of chemical and mechanical processes: - Electrostatic powder coating, - Liquid painting, - Anodizing (30-50 microns, black or grey), - Hard anodizing (30-50 microns, black or grey), - Zinc plating, - Yellow zinc chromate plating - Blackening (Black oxide coating) - cold or in oil, - Phosphating.

We manufacture products that not only perform exceptionally but also showcase a superior level of craftsmanship. We have expertise in a wide range of chemical and mechanical processes: - Electrostatic powder coating, - Liquid painting, - Anodizing (30-50 microns, black or grey), - Hard anodizing (30-50 microns, black or grey), - Zinc plating, - Yellow zinc chromate plating - Blackening (Black oxide coating) - cold or in oil, - Phosphating.

We manufacture products that not only perform exceptionally but also showcase a superior level of craftsmanship. We have expertise in a wide range of chemical and mechanical processes: - Electrostatic powder coating, - Liquid painting, - Anodizing (30-50 microns, black or grey), - Hard anodizing (30-50 microns, black or grey), - Zinc plating, - Yellow zinc chromate plating - Blackening (Black oxide coating) - cold or in oil, - Phosphating.

Many customers want to reduce the number of their suppliers and therefore ask us to supply FINISHED products. From this point of view, Mecanic Systems is surrounded with reliable and highly flexible partners capable of handling, under our control, the following operations: TIG & MIG welding, point welding. -Surface treatment : passivation, phosphatising, chromating, anodisation, galvanising, -Finishing :Painting (powder or liquid)µ, Electropolishing, Personalised screen printing

“Powder coating” is a type of coating that is applied as a free-flowing dry powder. Unlike conventional liquid paint, which is delivered using an evaporating solvent, powder coating is usually electrostatically applied and then heat-cured. The powder can be a thermoplastic or a thermoset polymer. It is usually used to create a hard finish that is harder than traditional paints. Powder painting is mainly used for coating metals such as household appliances, aluminium profiles, drum components, and car and bicycle parts. Newer technologies allow powder coating with other materials, such as MDF (Medium Density Fiber), using a variety of methods. Powder coating is very often used to properly prepare and protect various metal materials. Choosing this technique is very cost-effective as it has many advantages. Any defects and inaccuracies that remain after processing are hidden under the applied layer of varnish. Moreover, such coatings will be resistant

The Husky 307 diaphragm pump with type number D31211 has a pump tube and balls that are made of acetal, the diaphragms and seats are made of teflon. These Husky 307 double diaphragm pumps are ideal for pumping chemical liquids. These can be liquids such as paint, thinners, glues and, for example, polluting liquids. Because this pump is provided with two pump chambers with a common inlet and outlet, a continuous vacuum can be created by a linear movement of the diaphragm, whereby a ball valve ensures that the material can be further pressed. The membrane pump has a maximum pump capacity of 25 ltr/min and can handle a maximum working pressure of 7 bar.

Substations are transformer or distribution centers made of sheet steel in desired dimensions. They are suitable for use of all types of MV switchgears and LV panels. They are manufactured in the requirement number of sections and doors according to the project design. Strong construction made of sheet steel and profiles is painted with electrostatic powder paint or liquid paint for high corrosion resistance. In order to prevent the strong solar radiation in hot summer, the shell can be equipped with heat insulation material with low thermal conductivity, the most used fillers are: rock wool board, polystyrene foam, etc. Modular design in requested depth, width and length, in average 4 times lighter than a concrete version along with easy transport and commissioning are just some of the advantages of this solution. Compact substations are suitable for residential quarters, urban public utilities, renewable power plants, power distribution etc

A filling station with electronic scale for the filling of viscous to pasty liquids e.g. paints. varnishes or dispersions, adhesives, bitumen. For filling open containers just above the fill level, e.g. cans, buckets, canisters. Above level filling coarse/fine. Product feed from higher lying storage tanks via natural slope or with the help of pumps. Direct connection via product hoses to the valve. The System offers you: ■ calibratable above level filling just above the fill level with a ride-ci n valve ■ thread-cutting, non-dripping filling valve ■ fast cleaning of the valve (the product-contacted area consists of 3 parts) ■ a rapid changeover to other container sizes and changing products ■ the idéal solution for small and medium filling orders ■ filling, sealing and palletizing by one person ■ small space requirement ■ immediately ready for use, only energy [electricity and/or compressed air only) and product supply must be connected and filling can be started

The EFS 51 is a semi-automatic filling system that is equipped with both above and below level valves. It is suitable for the precise filling of viscous to pasty liquids, such as paints, varnishes or adhesives, into open containers such as cans and buckets. For liquids that can foam, gas or generate static charges, such as solvents or chemical liquids, the system offers under-level filling, e.g. into canisters. The liquids are fed from storage tanks by gravity or pumps. ■ calibratable filling, both above and below level ■ quick cleaning of the valves (the area in contact with the product consists of 3 parts) ■ Quick changeover to other container dimensions and changing products ■ Simple operation by one person ■ Can be used immediately: just connect the power supply (electricity and/or compressed air) and product supply and filling can begin

The EFS 51 is a semi-automatic filling system that is equipped with both above and below level valves. It is suitable for the precise filling of viscous to pasty liquids, such as paints, varnishes or adhesives, into open containers such as cans and buckets. For liquids that can foam, gas or generate static charges, such as solvents or chemical liquids, the system offers under-level filling, e.g. into canisters. The liquids are fed from storage tanks by gravity or pumps. ■ calibratable filling, both above and below level ■ quick cleaning of the valves (the area in contact with the product consists of 3 parts) ■ Quick changeover to other container dimensions and changing products ■ Simple operation by one person ■ Can be used immediately: just connect the power supply (electricity and/or compressed air) and product supply and filling can begin

Filling station with electronic balance for filling of viscous or pasty liquids, e.g.: paints, varnishes, dispersions, glues, bitumen. For above level filling in coarse and fine flow of standard container types, e.g. open cans, buckets and canisters. Product supply via pump or gravity. Product feed from higher lying storage tanks via natural slope or with the help of pumps. Direct connection via product hoses to the valve. ■ fillings can be calibrated ■ filling valve that eut threads and does not drip ■ quick cleaning of the valve (the valve area in contact with the product consists of 3 parts) ■ very fast cleaning of the container ■ quick conversion to other packing sizes ■ perfect for small and medium-sized filling ■ filling, sealing and palettizing by one person ■ the filling station needs only little space ■ immédiate readiness for operation, only connection to energy (electricity and compressed air) and product supply, and filling can be started

The EFS 51 is a semi-automatic filling system that is equipped with both above and below level valves. It is suitable for the precise filling of viscous to pasty liquids, such as paints, varnishes or adhesives, into open containers such as cans and buckets. For liquids that can foam, gas or generate static charges, such as solvents or chemical liquids, the system offers under-level filling, e.g. into canisters. The liquids are fed from storage tanks by gravity or pumps. ■ calibratable filling, both above and below level ■ quick cleaning of the valves (the area in contact with the product consists of 3 parts) ■ Quick changeover to other container dimensions and changing products ■ Simple operation by one person ■ Can be used immediately: just connect the power supply (electricity and/or compressed air) and product supply and filling can begin

A filling station with electronic scale for the filling of viscous to pasty liquids e.g. paints. varnishes or dispersions, adhesives, bitumen. For filling open containers just above the fill level, e.g. cans, buckets, canisters. Above level filling coarse/fine. Product feed from higher lying storage tanks via natural slope or with the help of pumps. Direct connection via product hoses to the valve. The System offers you: ■ calibratable above level filling just above the fill level with a ride-ci n valve ■ thread-cutting, non-dripping filling valve ■ fast cleaning of the valve (the product-contacted area consists of 3 parts) ■ a rapid changeover to other container sizes and changing products ■ the idéal solution for small and medium filling orders ■ filling, sealing and palletizing by one person ■ small space requirement ■ immediately ready for use, only energy [electricity and/or compressed air only) and product supply must be connected and filling can be started

Semi-automatic filling station with electronic balance for filling of viscous or pasty liquids, e.g.: paints, varnishes, dispersions, glues, bitumen. For above level filling in coarse and fine flow of standard container types, e.g. open cans, buckets and canisters. Product supply via pump or gravity. The filling station has the following advantages: ■ fillings can be calibrated ■ filling valve that eut threads and does not drip ■ quick cleaning of the valve (the valve area in contact with the product consists of 3 parts) ■ very fast cleaning of the container ■ quick conversion to other packing sizes ■ perfect for small and medium-sized filling ■ filling, sealing and palettizing by one person ■ the filling station needs only little space ■ immédiate readiness for operation, only connection to energy (electricity and compressed air) and product supply, and filling can be started

The EFS 50 is a semi-automatic filling machine with over and under level valves for the precise filling of viscous to pasty liquids such as paints, varnishes or adhesives. It is suitable for over-level filling into open containers such as cans and buckets as well as for under-level filling into bunghole containers, e.g. canisters, for foaming, gassing or statically charging liquids. ■ a calibratable over-level filling system ■ Thread-cutting, non-drip filling valve ■ an almost foam-free, calibratable under-level filling system ■ quick cleaning of the valve ■ Quick changeover to other container dimensions and changing products ■ the ideal solution for small and medium-sized filling orders ■ Simple operation by one person ■ Filling capacities of up to 10 containers per minute ■ Can be used immediately: just connect the power supply (electricity and/or compressed air) and product supply and filling can begin