Liquid dynamics - Import export

These miniature pressure probes are designed for measuring the flow and dynamic pressure of liquids and gases in pipelines. With diameters between 1,32 mm and 2,64 mm and a flexible yet robust cable, these probes can also be used in narrow ducts at depths of several metres.

Glue-303MS (hereinafter - "the Binder") is a one-component polyurethane binder for elastic elastic permeable coatings based on elastic aggregates (rubber crumb and EPDM-granulate). It does not contain organic solvents. It is cured by air moisture. When cured, it creates an elastic, durable bond with high moisture resistance. Appearance of components Homogeneous transparent colorless or whitish viscous liquid Dynamic viscosity of components at 70°С, Pa s 0.6-0.9 Content of non-volatile substances, % 100 Appearance of the cured coating Rough, elastic, permeable to water and its vapors surface. The degree of roughness depends on the fractional composition of the filler. Tensile strength of the cured coating, N/, within 8-10 (GOST 270-75) Elongation at break, %, not less than 350 (GOST 270-75) Coating curing time (at +20°С and 70% relative humidity) 24 hours – pedestrian loads can be provided; 3 – 5 days.

The tensiometers of the DCAT series are measuring instruments for force-based investigation of surface and interface properties. Because of the compact and modular product design of the DCAT series, a bespoke combination of device and accessories can be found for any use case. The DCAT 25SF single-fibre tensiometer contains a high-precision weighing system with a resolution of up to 0.1 μg. This enables measurements even on single carbon or glass fibres. Measurements can be carried out at defined humidity and at temperatures between -15 °C and 135 °C. In addition is it possible to investigate the viscoelasticity of monolayers. Furthermore, concentration series for determining the critical micelle concentration (CMC) can be automatically generated and measured. Measurements: - surface and interfacial tension - liquid density - dynamic contact angles - surface energy of solids - determination of the CMC - surface pressure - viscoelasticity of monolayers

The tensiometers of the DCAT series are measuring instruments for force-based characterisation of surfaces and interfaces. Because of the compact and modular product design of the DCAT series, a bespoke combination of device and accessories can be found for any use case. The DCAT 25 is the multifunctional all-round model of the series. Measurements can be carried out at defined humidity and at temperatures between -15 °C and 300 °C. In addition it is possible to investigate the viscoelasticity of monolayers in combination with the Langmuir trough module LTMr. As the only tensiometer in the DCAT series, this model can analyse the adhesive force extensively thanks to an additional camera module. Measurements: - surface and interfacial tension - liquid density and solid density - dynamic contact angles - surface energy of solids - critical micelle concentration (CMC) - sedimentation and penetration - analysis of adhesive force - surface pressure - viscoelasticity of monolayers

The tensiometers of the DCAT series are measuring instruments for force-based investigation of surface and interface properties. Because of the compact and modular product design of the DCAT series, a bespoke combination of device and accessories can be found for any use case. The DCAT 15 is the standard model of the DCAT series and offers more measurement methods and modular extensions compared to the entry-level models. In addition to measuring surface and interfacial tension as well as density, the DCAT 15 can be used to determine dynamic contact angles, the surface energy of solids and to investigate sedimentation and penetration properties. Together with the LDU 25 liquid dosing unit, automatic concentration series can be generated to determine the critical micelle formation concentration. Measurements: - surface and interfacial tension - liquid and solid density - dynamic contact angles - surface energy of solids - determination of the critical micelle concentration (CMC)

FIBALON®compact pro deluxe is THE universal filter solution „Made in Germany“ for your whirlpool, Jacuzzi or spa. The selected spherical shape, the special packaging size and the specially developed protective grid made of V4A stainless steel, enable a universal use with unique filter performance. The curvature of the grid ensures a full faced flow through the filter media bed and guarantees best cleaning results. The FIBALON®compact pro deluxe also has the worldwide unique dynamic fiber fixation „DyFix®“, which guarantees an incomparable filtration performance and a high dirt absorption capacity. This results in less service and cleaning effort. FIBALON®filter materials are always made of recycled materials to protect the environment. It has an antibacterial effect for the fibers and guarantees a long service life. Moreover, it is easy to clean and to reuse. The water in your whirlpool will be optimally disinfected without limitations in water circulation.