Limit value - Import export

Flow monitoring Flow monitoring is a procedure that demands a reliable and reproducible surveillance of limit values and flow patterns. Flow sensors detect critical deviations of the flow rate of liquid and gaseous media. Typical areas of application are the monitoring of cooling circuits in welding applications for example, protection against dry running of pumps, as well as the flow monitoring in air ducts and air conditioning equipment. Because of the calorimetric mode the media temperature is also monitored. Flow rate measurement In addition to reproducibility, flow-rate measurement demands a defined degree of accuracy. The flow meters continuously and accurately measure a defined volume of a fluid per unit of time and are suitable for applications where qualitatively consistent process results and a steady supply of fluids is essential. We offer flow meters with calorimetric, magnetic-inductive and Vortex measurement principle for various areas of application.

Based on its specifications, this device can be used in various applications. It is especially suitable for resistance measurement on insulating materials such as e.g. cable insulations, foils, textiles, surfaces, insulating liquids,etc. With a test voltage of 45 V, 100 V, 250 V and 500 V the device fulfi ls most test specifi cations such as e.g. DIN 51953, 53482 and 54345. The guard switching allows single resistance measurements in a triangle wiring. This could be e.g. a two line cable with common shield or the measurement of insulating materials on a guardring measurement cell. The selection of the measurement range is done manually or automatically. Fast subsequent measurements can be realized by the internal limit value indicator. When the measured value exceeds the limit the limit value indicator switches and activates a potential-free relay output. The megohmmeter RESISTOMAT® model 24508 is the right instrument for its use in laboratory as well as in industrial applications.

for potentiometric and other sensors with analog interface. Highly accurate, display up to 4 1/2-digits . Programmable m ode, scaling, limit value, zero point and tare. Selectable analog and digital interfaces.

for potentiometric and other sensors with analog interface. Cost effective, various programming possibilities, (input dimension, scaling, limit values, zero point, tare etc.). Selectable analog and digital Interfaces. Useable also as data logger due to internal data recording ability.

This torque sensor is qualified for static and dynamic measurements on non-rotary applications. Further the measurement of reaction torques on rotating machine parts is possible. Especially the torque sensors with flanges are preferred. They are mounted between motor and stator, e.g. in agitator drives. This enables a maintenancefree torque measurement. For individual measuring tasks the design of our torque sensors can be adapted to the customer’s installation conditions. More application examples: Test structures in the field of precision mechanics Determination of friction torques Acquisition of breakage moments on screw caps The design has been optimized regarding overall length, weight and volume, so that axial forces up to relatively high limit values and bending moments of up to 20 % of the measuring range have only a small effect to the influence of the measuring element.

Model 9180 supports force, pressure and torque sensors operating on the strain gauge principle, as well as the connection of position and angle sensors in potentiometer or DC/DC configuration. It also allows the measurement of process signals ± 1 V/ 5 V/ 10 V or 0 ...1 mA, 0(4) ... 20 mA. The current measured value is indicated on the 14 mm high LED main display, while a second display located directly below provides a reading of the peak value. The display is particularly suitable for highly accurate measurements due to the high accuracy of 0.1%. It is also possible to monitor up to 4 limit values and provide the results via relay or transistor outputs. Thus the process value display can be used for classification, process and control tasks. The current measured value is frozen on the display by activating an external HOLD signal. The TARE function is useful for balancing out previous loads for example.

Aral MegaTurboral LA 10W-40 is based on the strict requirements of the latest generation of Euro 4.5 and 6 engines with exhaust aftertreatment systems, for which a lubricant with a reduced content of sulfate ash, phosphorus and sulfur (Low SAPS) is prescribed, to ensure safe operation. The formulation enables a maximum reduction in exhaust emissions to comply with Euro 4.5 and 6 limits. Application Aral MegaTurboral LA 10W-40 was developed with special consideration of the requirement profiles for exhaust gas aftertreatment systems, especially when using diesel particle filters in commercial vehicles. Advantages Low SAPS technology optimizes the efficiency of the exhaust gas aftertreatment and thus ensures safe compliance with the legally prescribed Euro 4.5 and 6 limit values. Synthesis technology enables oil change intervals to be extended while taking into account the manufacturer's instructions and reduces maintenance costs and the resulting downtime.

Aral MegaTurboral LA 10W-40 is based on the strict requirements of the latest generation of Euro 4.5 and 6 engines with exhaust aftertreatment systems, for which a lubricant with a reduced content of sulfate ash, phosphorus and sulfur (Low SAPS) is prescribed, to ensure safe operation. The formulation enables a maximum reduction in exhaust emissions to comply with Euro 4.5 and 6 limits. Application Aral MegaTurboral LA 10W-40 was developed with special consideration of the requirement profiles for exhaust gas aftertreatment systems, especially when using diesel particle filters in commercial vehicles. Advantages Low SAPS technology optimizes the efficiency of the exhaust gas aftertreatment and thus ensures safe compliance with the legally prescribed Euro 4.5 and 6 limit values. Synthesis technology enables oil change intervals to be extended while taking into account the manufacturer's instructions and reduces maintenance costs and the resulting downtime. Minimized wear - protects

Aral MegaTurboral LA 10W-40 is based on the strict requirements of the latest generation of Euro 4.5 and 6 engines with exhaust aftertreatment systems, for which a lubricant with a reduced content of sulfate ash, phosphorus and sulfur (Low SAPS) is prescribed, to ensure safe operation. The formulation enables a maximum reduction in exhaust emissions to comply with Euro 4.5 and 6 limits. Application Aral MegaTurboral LA 10W-40 was developed with special consideration of the requirement profiles for exhaust gas aftertreatment systems, especially when using diesel particle filters in commercial vehicles. Advantages Low SAPS technology optimizes the efficiency of the exhaust gas aftertreatment and thus ensures safe compliance with the legally prescribed Euro 4.5 and 6 limit values. Synthesis technology enables oil change intervals to be extended while taking into account the manufacturer's instructions and reduces maintenance costs and the resulting downtime.

The 9163 process value indicator covers a wide range of applications in which process values need to be measured, displayed, analyzed and transferred to higher-level control systems. Typical applications include measuring geometric values in production, for instance differential measurements, or testing material properties in the laboratory. The measured values can be transferred via PROFIBUS, RS232 interface or analog output. The multi-channel version can be used with up to four sensors. These sensors can be combined using mathematical functions, so that even complex measurement tasks can be performed with just the one instrument. Visual alarms on the display make it easier and more convenient to assess when values lie off-limits. Up to four configurable outputs are available as relay or logic outputs. The excellent measurement accuracy of 0.1% also makes this instrument suitable for high-precision applications.

Real-time monitoring of the measurement The HawkEye software offers various forms of representation for monitoring and controlling the ongoing measurement. Any number of pages can be created in the software with different forms of presentation of the measurement data. By supporting a server-client architecture, monitoring is scalable and can be distributed across any number of PCs. •,Real-time phase analysis •,Speed signals are calculated and displayed in real time. •,Different forms of representation for the measurement signals (time domain, FFT, Bode diagram, orbit, waterfall, machine order monitoring) •,Real-time monitoring and visual representation of implemented limit values. •,Visual and acoustic signal when limit values are exceeded. •,The screen layout can be flexibly adapted to the respective monitoring requirements and user needs. •,No license fees for using the software. •,MS Windows compatible

The Hawk user interface gives you full control over your measurement. The interface of the Hawk GUI offers the possibility of a simple and clear configuration of all measurement channels, as well as the control of data acquisition during the actual measurement. It also provides an overview of the organization of all measurement PCs and amplifiers in the network. •,Interface for configuring all connected measuring devices. •,Configuration of various limit values to monitor the measurement. •,Seamless recording of your measurement •,Define individual time ranges (manoeuvres) to make them easier to identify in the downstream analysis. •,Configuration of additional, external amplifier hardware can be integrated. •,No license fees for using the software. •,MS Windows compatible

—programmable pressure sensors 0...16 bar with digital display —For smart pressure control in processes —Pressure sensor for pressures from 0...16 bar relative —With up to two switching outputs and analogue output —Programmable functions, such as damping of pressure peaks, rapid adjustment of two switching outputs, limit values, hysteresis

EGE flow sensors without integrated Amplifier permit the space-saving flow measurement on site and the comfortable setting of the limit value using separate amplifier, e.g. within a control cabinet. The measurement takes place without mechanically moving parts using a thermal measuring element. The current flow state is displayed at the amplifier using LEDs. The sensor can be exposed to high temperatures. The devices are used wherever a safe, robust and low-maintenance monitoring of flow values is required. This includes e.g. cooling circuit monitoring, monitoring of the flow rate of process fluids, monitoring of metering processes or also for pump protection in process and factory automation.

EGE flow sensors for gaseous mediums without integrated amplifier permit the space-saving flow measurement on site and the comfortable setting of the limit value using separate amplifier, e.g. within a control cabinet. The measurement takes place without mechanically moving parts using a thermal measuring element. The current flow state is displayed at the amplifier using LEDs. The devices are used wherever a safe, robust and low-maintenance monitoring of flow values is required. This includes e.g. air conditioning technology, monitoring of exhaust air systems and ventilation monitoring.

EGE sensors for fluid mediums with integrated measuring & amplifier are compact devices with extremely robust housing and integrated measuring and amplifier. The current flow state is displayed at the sensor using LEDs. The measurement takes place without mechanically moving parts using a thermal measuring element. Limit values are set directly at the device. These sensors are used wherever a safe, reliable and low-maintenance recording of flows is required. This includes e.g. all automation and chemical industries in the most varied areas, such as cooling circuit monitoring, monitoring the flow rate of process fluids, monitoring metering processes or also for pump protection.

EGE flow sensors for gaseous media in explosive areas permit the space-saving flow measurement on site and the comfortable setting of the limit value using separate amplifier. The measurement takes place without mechanically moving parts using a thermal measuring element. The current flow state is displayed at the amplifier using LEDs. The devices are used wherever a safe, robust and low-maintenance monitoring of flow values is required. The measuring sensors of the product series ST 400 Ex; STS; STEX have ATEX approval and may, dependent on their design, be used in Gas-Ex areas requiring equipment for EPL Ga or EPL Ga/Gb. In the Dust-Ex area their use is permitted up to EPLDa.

The offer of electrical installation work forms the solid foundation of our company. It is connected with the own production of electrical switchboards. high current and low current installation by installing a lightning rod design activity Production of LV switchgear (without limitation by current value)

Our innovative measurement system allows for vibration measurements to be taken of whole-body vibration exposure according to ISO 2631. Its autonomous sensors that do not need to be wired during measurements and automated artefact detection provide for a user-friendly implementation and use (can be used by non-experts). Stored data is downloaded from the sensor(s) at the end of the working period to a smartphone or a PC using a Bluetooth connection. The software allows for the automatic computation and display of workers’ exposure to whole-body vibrations and indicates how such exposure compares with the limit and action values defined in the vibration Directive. The set of whole-body vibration meters (Vib@Work Seat, Vib@Work Floor & Vib@Work Detect) can measure the vibration exposure of either seated or standing operators. In addition, when used in conjunction, seat efficiency can also be measured (i.e. S.E.A.T. factors).

The teco cs series was improved by installation of a user-friendly touch screen with new, integrated functions. All standard units are equipped with an energy efficient constant heating control. Depending on the product version a flow rate measurement and control, whose actual value is indicated simultaneously with the actual and nominal values on the colour screen, is installed as standard or is optionally available. Temperature profiles are graphically indicated after selection of the corresponding menu function. On the start page useful functions like limit value monitoring, leak stop operation etc. can be selected. The proven teco cs series was improved by installation of a user-friendly touch screen with new, integrated functions. The 95°C series was extended by three versions with higher capacities. The models are designed for larger consumers; they have heating capacities from 18 to 36 kW, cooling capacities from 50 to 120 kW and pump flow rates from 110 to 170 l/min.

The multiple water quantity control system in modular design that is available in several versions fulfils not less than three requirements at the same time. It combines the advantages of the conventional water distributors, the impulse cooling systems and the continuously operating temperature control units while eliminating the disadvantages of each of these systems. The temperature control system disposes of up to 128 individually adjustable circuits and is suitable for the processing of polyolefins and technical thermoplastic materials. In case of the basic execution (itd B) the requested flow rate is adjusted manually and is then monitored by a flow meter and presented digitally and graphically on the central display of the control unit. In the standard execution (itd R) the water quantity is individually set for each circuit at the central operating unit and - if necessary - is readjusted automatically via a water quantity regulation valve within adjustable limit values.

, the controller with internet access Name: guest, Password: 2001 WebMasterONE unites the main requirements to a modern water management, namely measuring, recording remote monitoring and of course regulating in one single device. The system records the data and distributes them intelligently about different media such as inter- and intranet, mobile phone or fax. It supports all global communication standards: USB interface for the local computer (standard), Ethernet for local area network communication (standard), internal analogue modem or internal cellular modem (CDMA, GPRS, GSM) compatible with most providers of mobile telecom services. In case of breakdown or violations of limiting values the system automatically sends out messages by phone, fax or email. All readings are recorded round-the-clock and can be requested to be sent via e-mail either manually or automatically in adjustable cycles. The administrative department has permanently insight into current readings, tot

 WPH webReady The pH/ORP on-line process controllers are designed for industrial, commercial, and municipal water treatment applications. The output configuration allows you to program up to four outputs in a variety of control modes. Select from on/off mechanical relays or pulse proportional control for direct connection to metering pumps. The easy-to-use menu format and pre-wired, pre-mounted panel system options make set-up and installation quick and simple. Integrated data logging is available to validate system performance. With a USB memory stick data and event logs that include electrode measurements, temperature and relay status can be extracted. Then download log files from the USB stick to a PC. Product features: Range of applications Select from pH or ORP measurements and from five output options. Use In-Range to control a solenoid valve to dump a batch treatment tank when measurement value is within limits, or program for Out-of-Range Alarm in waste treatment applica

Testing equipment for verification of the correct adjustment and function of Grounding Controlled Device type EKX-4 and EKX-4 (2-pole) as well as of former Grounding Control Devices type EKS-3, EKN-3, EKK-3 and EKK-3/C. Purchase of equipment for German customers only. Please contact your local sales partner . universal tester for all Grounding Control Devices by TIMM easy testing and monitoring due to preconfigured limit values Please note: Front plate in English language.

Limit value switch for frequency (sinusoidal signal). Simple application; for rough environments. Limit value freely adjustable by drum scale. Open-circuit or closed-circuit devices available. Compact and robust construction. Operating status indication by integrated LED.

Limit value switch for frequency (sinusoidal signal). Simple application; for rough environments. Limit value freely adjustable by drum scale. Open-circuit or closed-circuit devices available. Compact and robust construction. Operating status indication by integrated LED.

Limit value switch for frequency (direct current). Simple application; for rough environments. Limit value freely adjustable by drum scale. Open-circuit or closed-circuit devices available. Compact and robust construction. Operating status indication by integrated LED. Approvals: BV, DNV-GL, LR

Limit value switch for terminal W of a 24 V three-phase generator. Simple application; for rough environments. Limit value freely adjustable by drum scale. Open-circuit or closed-circuit devices available. Compact and robust construction. Operating status indication by integrated LED.

Limit value switch for frequency (sinusoidal signal). Simple application; for rough environments. Limit value freely adjustable by drum scale. Open-circuit or closed-circuit devices available. Compact and robust construction. Operating status indication by integrated LED.