Lightning protection - Import export

With a small diameter of just 16 mm, these level sensors are ideally suited to use in small spaces, such as narrow monitoring pipes. The measurement results can be read out via the 4...20 mA output or the RS485 interface. Extended lightning protection is integrated as standard.

In the high-precision level pressure transmitters of the 36XW-Ei series, the temperature dependence and nonlinearity are precisely compensated for in the microcontroller by means of a mathematical model. In addition to the RS485 interface, the measurement results can also be output via the integrated D/A converter as a rangeable analog signal. Extended lightning protection is also available as an option. Intrinsically safe – suitable for use in explosive atmospheres.

NSPV surge protective device AC Surge protection device(SPD) is an indispensable device for lightning protection of electronic equipment. It is used to limit the instantaneous overvoltage of the power line and signal transmission line to the voltage range that the equipment or system can withstand, or A powerful lightning current drains into the ground to protect the protected equipment or system from impact and damage.

In the high-precision level sensors of the 36XW series, the temperature dependence and nonlinearity are precisely compensated for in the microcontroller by means of a mathematical model. In addition to the RS485 interface, the measurement results can also be output via the integrated D/A converter as a rangeable analog signal. Extended lightning protection is also available as an option.

The high-precision level sensors of the 36XiW series measure with ultra-high accuracy and resolution. Temperature dependence and nonlinearity are precisely compensated for in the microprocessor by means of a mathematical model. They can be supplied with either an RS485 or SDI-12 interface. In addition to the pressure sensor for the level measurement, it is also possible to integrate a Pt1000 that is calibrated to ±0,1 °C from 0...50 °C. Extended lightning protection comes as standard with the SDI-12 interface and is available as an option for the RS485 interface.

The load cell PR 6221 was designed specifically for use in truck scales. Its outstanding precision and long product lifetime cut service and calibration costs, and help to reduce downtimes to a minimum. In combination with the converter Connexx®, the PR 6221 becomes a digital solution.* - Optimum reliability thanks to German Quality * - Precise measurement results for exact load billing * - Top fail-safe performance thanks to high lightning protection * - Optimum protection against waterlogging, frost and de-icing salt * - Also available as a digital solution with converter Connexx®

The high-precision multi-parameter probes of the 36XiW-CTD series measure conductivity and temperature as well as pressure, along with the depth of bodies of water. Temperature dependence and nonlinearity are precisely compensated for in the microcontroller by means of a mathematical model. The integrated Pt1000 achieves an accuracy of ±0,1 °C, and the conductivity can be measured at ± 2,5% of the selected range (0,2 / 2 / 20 / 200 mS/cm). The sensors can be supplied with either an RS485 or SDI-12 interface. Extended lightning protection comes as standard with the SDI-12 and is available as an option for the RS485 interface.

The digital Pendeo® Truck load cell is the optimal solution for weighbridges. Its takes the performance of our products to the next level and makes the setup, calibration and operation of weighing systems now even easier and more reliable. Ideally suited to use in weighbridges Standardized, maintenance-free, extremely compact design Extremely robust design in hermetically sealed stainless steel housing Special strain-gauge technology for significantly improved lightning protection High overload range (up to 150 %) 100 % compatible with PR 6221 Reaches stability quickly which ensures short weighing times High EMC compatibility (10 V/m) Suitable for use in ATEX zone 2/22 Additional reliability thanks to diagnostic function

NSPV surge protective device DC SPD protect against lightning surge voltages in solar system (photovoltaic power supply system). These units must be installed in parallel on the DC networks to be protected and provide common and different modes protection. Its installed location are recommended at both ends of the DC power supply line (solar panel side and inverter/converter side), especially if the line routing is external and long.High energy MOVs equipped with specific thermal disconnectors and related failure indicators.

At our sites in Rothenburg/Saale, Hamm, Brandenburg and Nedri Industriedraht (Hamm), we manufacture iron and fabrication wire for the machine, plant and steel construction industry, shopfitting, displays, automotive, furniture industry, household goods, chains, blasting material, tool carriers, filter industry, fence construction, garden and landscape design, connecting elements, logistics, construction industry, electrical and cable industry, bent wire parts, household appliances and gastronomy, animal husbandry, welding technology, lightning protection systems, gabions, packaging industry.

The separable plastic immersion probe LMK 858 was designed for level measurement in aggressive media, desalination plants and for use in more viscous media such as sludge. Since the area of application is often outside a building, great emphasis was placed on high surge / lightning protection. The immersion probe is based on an extremely robust and precise pressure sensor, the membrane of which consists of a high-purity ceramic. Another special feature of the LMK 858 is the separability of the probe head and cable part. Features: — nominal pressure: 0 ... 40 cmH2O up to 0 ... 100 mH2O — accuracy: 0.35 % (opt. 0.25 %) FSO — diameter 45 mm — chemical resistance — housing PP-HT — integrated lightning protection and increased overvoltage protection; 8 kA gas discharge tube (8/20 μsec); 4 kV surge l-l/l-e according to EN61000-4-5 Optional Features: — cable protection — diaphragm pure ceramic (99.9 % AI2O3)

The separable plastic probe is designed for level measurement of water, waste water as well as fuels and oils. Basic element is a piezoresistive stainless steel sensor. Since the area of application is often outside a building, great emphasis was placed on overvoltage / lightning protection. In order to facilitate stock-keeping and maintenance the transmitter head is plugged to the cable assembl with a connector and can be changed easily. Features: — nominal pressure: 0 ... 1 mH2O up to 0 ... 100 mH2O — accuracy: 0,35 % (opt. 0,25 %) FSO — diameter 35 mm — cable and sensor section separable — small thermal effect — integrated lightning protection and increased overvoltage protection; 8 kA gas discharge tube (8/20 μsec); 4 kV surge l-l/l-e according to EN61000-4-5 Optional Features: — SIL 2 (safety integrity level) according to IEC 61508 / 61511 — different cable and elastomeres — customer specific versions

The detachable plastic submersible probe LMK 808 was developed for level measurement in water and wastewater. The basis of the probe is an extremely robust, almost maintenance-free capacitive ceramic sensor. For level measurement in river courses, on weir systems or in locks, great emphasis was placed on overvoltage / lightning protection. In addition, the cable can be protected against bites if necessary. The sensor head can be separated from the cable part and can therefore be replaced if necessary without time-consuming assembly work. Features: — nominal pressure: 0 ... 1 mH2O bis 0 ... 100 mH2O — accuracy: 0.35 % (opt. 0.25 %) FSO — diameter 35 mm — diaphragm ceramics Al2O3 (99.9 %) — excellent long term stability — integrated lightning protection 8 kA gas discharge tube (8/20µsec); 4 kV surge l-l/l-e according to EN61000-4-5 Optional Features: — mounting accessories — different kinds of elastomer

The Structural Health Sensors combine a 2-axis accelerometer with a temperature sensor. Their enhanced internal surge protection and electromagnetic interference immunity make them particularly suitable for the permanent monitoring of outdoor tall structures. The Structural Health Sensors can perform measurements in extreme conditions ranging from -40°C to +85°C. They are of course dust and watertight to IP66. We have a proven track record of several thousands of such sensors operating reliably around the world.TYPICAL USE Permanent outdoor monitoring of tall structures FEATURES Acceleration measurements along 2 axes Temperature measurement of the surface the sensor is attached to Signals transmission through 4-20mA current loops Embedded Lightning Protection Operation down to -40°C MODELS Standard High Resolution

Combination arrester, lightning current and surge arrester, type 1+2 • Protection level ≤ 1.5 kV • For lightning protection equipotential bonding to VDE 0185-305 (IEC 62305) • Lightning current arresting capacity up to 100 kA (10/350), 3+NPE • Line following current quenching 50 kA Ipeak, arrester backup fuse to 315 A gL/gG • Fulfils the requirements of VDE-AR-N 4100 for use in pre-meter area • Encapsulated, non-extinguishing spark gap arrester for use in distributor housings Application: Industrial systems and buildings with external lightning protection of the highest class I to IV. Compact protection device

Completely pre-terminated and ready for connection, consisting of: 3x MCD 50-B: Coordinated lightning current arrester, type 1+2 to EN 61643-11 and 1x MCD 125-B/NPE: Coordinated N-PE spark gap, type 1+2 to EN 61643-11. For interface 0 to 2 (LPZ) in accordance with lightning protection zone concept to IEC 61312-1 and/or VDE 0185-305. • Lightning protection equipotential bonding to VDE 0185-305 (IEC 62305) • Lightning current arresting capacity to 50 kA (10/350) per pole and up to 125 kA (10/350) in total • Protection level < 1.7 kV allows device protection • Short-circuit resistance 10 kA, arrester backup fuse to 500 A gL/gG • Suitable for use in pre-meter area according to VDE-AR-N 4100 • Encapsulated, non-extinguishing spark gaps Application: Industrial systems and buildings with external lightning protection of the classes I to IV.

Combination arrester, type 1+2, for mounting on 40 mm busbars, for TN-S and TT systems • Protection level ≤1.5 kV to protect the terminals • Lightning protection equipotential bonding according to VDE 0185-305 (IEC 62305) • Lightning current arresting capacity up to 100 kA (10/350) 3+NPE • Fulfils the requirements of VDE 0100-534 (IEC 60364-5-53) • Line follow current quenching up to 50 kA and max. backup fuse up to 315 A gL/gG • Spark gaps for use in the pre-meter area according to VDE-AR-N 4100 Application: Building with lightning protection or outside cable infeed.

Saving energy by intelligent switching. Clear and nicely designed control centre for your entire PC or HiFi equipment. This device also perfectly serves as a work pad for your notebook or monitor. Up to 6 different devices can be switched easily and separately. 1 main switch 2-pole and 6 device switches 1-pole, all illuminated for quick and easy control. Surge and lightning protection up to 19.500 A to protect all devices connected, e.g. against indirect lightning strikes. Integrated HF-filter against high-frequency failure. 4-fold USB-Hub 2.0 to connect additional USB-devices. USB-cable included. Childproof sockets. In colourful display-packaging. Cable length: 2 m Cable: H05VV-F 3G1,5 Measurements: 38 x 30 x 6 cm Socket: 6 Nominal current: 16 A Interference filter: EMI/RFI USB-ports: 4 Plug-in system: DE

This stainless steel roof safety hook with its flat shaft is simply installed on a continuous wooden beam. The 2 stainless steel screws supplied are screwed into the beam through the counter lathing/panelling. Special screws are also available for installing the device on top of over-rafter insulation. This roof hook can be implemented as a natural conducting component in a lightning protection system (100 kA) in accordance with EN 62305-3 Roof safety hook in accordance with EN 517:2006, type B Anchorage point + ladder hook Designed for load-bearing wooden structures Simply screw it onto a wooden beam (also suitable for over-rafter insulation) Min. beam dimensions: 60 mm x 120 mm Installation materials included

This stainless steel roof safety hook - specially designed for tiled roofs - is equipped with a cranked shaft for bridging the roof lathing. Is it simply installed by screwing the 2 stainless steel screws supplied through the counter lathing and into the woodem beam. We also supply an optional installation set for flexible attachment to a specially-prepared wooden panel (instead of a beam). This roof hook can be implemented as a natural conducting component in a lightning protection system (100 kA) in accordance with EN 62305-3 Roof safety hook in accordance with EN 517:2006, type B Anchorage point + ladder hook Designed for load-bearing wooden structures Simply screw it onto a wooden beam (also suitable for over-rafter insulation) Min. beam dimensions: 60 mm x 120 mm Installation materials included

Use this connector cable clamp to connect your lifeline system (6 or 8 mm) to a lightning conductor. This allows you to actively incorporate your anchorage device into your lightning conductor system - providing more effective protection against a lightning strike. Designed for 6 mm and 8 mm lifeline systems Connects your lifeline system to your lightning conductor

The basic equipment of the NSBox-123 includes: wall mounting brackets, mounting plate with DIN-rails, terminal blocks, a two-pole circuit breaker, an electrical grounding bar, a fan with a thermostat, a set of cable glands. These modules can also be included in the assembly: -Unmanaged Industrial switch: uplink 1 TP/1G, 4 ports TP/1G PoE 30W; -Power Supply 48VDC-100W; UPS CR-48VDC-155VA with mounting kit for batteries 7Ah x4; -Climatic control system inside enclosure: thermostats, fan, Fan Heater; -Lightning and surge protection for Ethernet PoE ports and power circuits 220VAC; -NSBon-47: Active to Passive PoE Converter, Input 802.3af/at/bt PoE | Output 24V Passive PoE; -NSBon-61: Industrial 4G LTE Cellular Router: 1 WAN, 1 LAN, 1 RS232, DI/DO, 1 micro SIM Slot.

In coal mining, gas-and-oil producing industry, metallurgy, engineering, construction industry, sea and river transport. It can be used as lightning protection at high voltage lines.Steel cable (rope) is made of galvanized steel wire (number of wires 19) twisted as single or in layers and is covered with anticorrosive temperature resistant lubricant material. agreed with the customer. Deviation from length is possible: up to 400m +5%, above 400m +20%.

64 channel capacity Large LCD with touch-screen user interface Analog, digital or Modbus RTU serial input capability Readily field expandable with auto configuration capability Versatile distributed I/O installation options Lightning &amp; over-voltage protection standard Data logging of alarms, calibration, comm errors, faults, peak and average readings

VIRTU Electromechanical Lightning Strike Counter is designed for takes all conducted lightning strikes under record. Likewise lightning terminals and grounding systems, lightning strike counters should alse be durable to extreme currents. VIRTU Lightning Strike Counter works with the arrested strikes own current and doesn't need any external battery. Counting digits can be modified as to client's preferences from 3 to 7 number digits. Light and being accordance with IP65 level durability makes VIRTU a perfect instrument to complete a lightning protection system.

8 10/100/1000M Adaptive RJ45 portsMaximum transmission distance of optical port 120kmAll ports have wire-speed forwarding capabilitySupport port auto-flip Auto MDI/MDIX functionPlug and Play Non Network Management, no configuration required * EMC：15kv air discharge, 8kv contact discharge, 6kv port lightning protection, 4kv power supply lightning protection * IP40 Protection Class, Industrial Standard