Lifting gear - Import export

ZWP is one of the leading independent manufacturer in Germany for gears, pinions and rim gears. We supply already well-known manufacturers for gear boxes. We are looking forward getting intouch with you to have a conversation about possibilities for your supply. Sectors of our (international) customers are: Mining, oil, offshore, rail and ship transmissions, industrial transmissions, and many more fields of applications. Overview about the capabilities for production: Gears internal and external toothed hardened and grinded Module 2 – 50 mm Diameter 100 – 2,000 mm Internal toothed rings / rim gears hardened and grinded Module up to 20 mm - more on request Diameter 100 to 1,800mm Pinions and shafts internal and external toothed hardened and grinded Module 1 – 50 mm Diameter 50 – 500 mm Length up to 1,500 mm Hardening and balancing inhouse possible Cooperation with companies for special manufacturing of gears and pinions etc We speak English.

KFE Special customer requirements Applications Overview Presses Machine Tools Automatization + Feeders Lifting Gear + Mobile Hydraulics Production Technology Special Machinery CAD Download Contact Electric Locking Unit The electric Locking Unit KFE is used as a stepless locking device on round rods and holds axial forces in both load directions without axial play. It is used where hydraulic or pneumatic solutions are not possible. The holding force is created by the proven spring-operated clamping system as it is used in SITEMA’s hydraulically or pneumatically operated Locking Units. At a drop of the control voltage or in case of failure of the electric supply, the Locking Unit KFE clamps automatically. Therefore, it is also suitable for use in safety relevant applications. To operate the Locking Unit KFE, a supply voltage of 24 V and a control signal for the input command “clamp/release” are sufficient. The Locking Unit is self-monitoring and provides output signals...

KRM Electric Locking Unit KFE Special customer requirements Applications Overview Presses Machine Tools Automatization + Feeders Lifting Gear + Mobile Hydraulics Production Technology Special Machinery CAD Download Contact Mechanical Safety Catcher The Mechanical Safety Catcher KRM is operated purely mechanically and requires neither a hydraulic nor a pneumatic system for control. The clamping head is kept open mechanically and acts upon rupture of the suspension (rope, belt, chain, etc.). The energy of the falling mass is then used to generate the clamping force. In applications where lifted loads can be dangerous in case of rupture of the suspension device, Safety Catchers KRM are used to protect people and assure accident prevention. Safety Catchers KRM secure the load at any point of the stroke in a mechanically safe and absolutely reliable way. Due to the principle of self-reinforcing clamping, a very high level of safety is reached. Application example Packing...

Mechanical Safety Catcher KRM Electric Locking Unit KFE Special customer requirements Applications Overview Presses Machine Tools Automatization + Feeders Lifting Gear + Mobile Hydraulics Production Technology Special Machinery CAD Download Contact Auto Bleeder The SITEMA Auto Bleeder has been specially designed for the use with a SITEMA clamping head. It makes sure that the hydraulic system is constantly bled. Air bubbles in the hydraulic fluid might combust spontaneously under certain conditions (so-called Diesel effect). As a consequence, seals and sealing surfaces can be damaged, causing leakages. Clamping heads are especially susceptible for this phenomenon, as they have only a very small hydraulic volume and are not flushed through at each activation. Air can therefore easily accumulate in the clamping head. This is the reason why the usual initial bleeding at commissioning is often not enough, especially when the line leading to the clamping head points upwards...

Rod leaving clamping head Auto Bleeder Mechanical Safety Catcher KRM Electric Locking Unit KFE Special customer requirements Applications Overview Presses Machine Tools Automatization + Feeders Lifting Gear + Mobile Hydraulics Production Technology Special Machinery CAD Download Contact Mechanical Valve Actuator MVA Secure the rupture of a chain with the full comfort of a pneumatic SITEMA clamping head When a load has to be secured against rupture of a suspension device (e.g. a chain), many customers use our Mechanical Safety Catcher KRM. This unit has the advantage to hold the load immediately upon rupture of the suspension device. Additional sensors to detect rupture of a chain are not necessary. On the other hand, it is not possible to activate the KRM in a user-defined position without rupture of the suspension device, e.g. for maintenance purposes. Here, the Mechanical Valve Actuator MVA comes to your rescue. It is simply put between the suspension device and the...

Mechanical Valve Actuator MVA Rod leaving clamping head Auto Bleeder Mechanical Safety Catcher KRM Electric Locking Unit KFE Special customer requirements Applications Overview Presses Machine Tools Automatization + Feeders Lifting Gear + Mobile Hydraulics Production Technology Special Machinery CAD Download Contact Electropneumatic module EPM The Electropneumatic Module EPM acts as interface between (electrical) power supply / control and a pneumatic SITEMA clamping head. All pneumatic SITEMA clamping heads with an operating pressure of up to 4 bar and an operating volume of up to 220 cm³ can be pneumatically controlled by the EPM. It is also possible to operate several clamping heads in parallel with one EPM. The EPM is controlled by a 24V supply and switching voltage. The outlet pressure which is required to open or keep open a pneumatic clamping head is controlled by a control signal. If the voltage fails or the input signal is switched off, the pressure is...

ZWP is one of the leading independent manufacturer in Germany for gears, pinions and rim gears. We supply already well-known manufacturers for gear boxes. We are looking forward getting intouch with you to have a conversation about possibilities for your supply. Sectors of our (international) customers are: Mining, oil, offshore, rail and ship transmissions, industrial transmissions, and many more fields of applications. Overview about the capabilities for production: Gears internal and external toothed hardened and grinded Module 2 – 50 mm Diameter 100 – 2,000 mm Internal toothed rings / rim gears hardened and grinded Module up to 20 mm - more on request Diameter 100 to 1,800mm Pinions and shafts internal and external toothed hardened and grinded Module 1 – 50 mm Diameter 50 – 500 mm Length up to 1,500 mm Hardening and balancing inhouse possible Cooperation with companies for special manufacturing of gears and pinions etc We speak English.

If you need two Coil Reels to hold one coil, you need a Heavy-Duty Coil Feed Line above all. One that is designed extremely robust and knows to subdue even materials of highest bounce and largest cross-sections.To ensure this, we have taken no heed to cost savings but went by the maximum principle: 2 Coil Reels with high-performance arbors retain the coils from left and right. 2 x 2 hydraulic arms secure them from top and bottom – each with eight tons pressure force, each with hydraulically driven snubber roll. The loading is done with one central lifting gear built into a super-duty running frame for the V-nest. Hydraulic manipulators with pivoting and bending function support the threading of the material. On the receiving end, a Pre-Straightener with 200mm work rolls takes over, after hydraulic edge guides have ensured central entry. Now, if someone asks us our definition of “heavy-duty”: We find 36.000 kilogram coil weight and 2.

EH 100 JDN Monorail Air Hoists Carrying capacities: 10 t up to 115 t per unit According to application JDN Monorail Hoists can be deployed as Double Lifting Gear: working in parallel as for example in BOP handling systems or working in tandem connected by a coupling rod as for example for handling grinding rollers in the cement industry. Two versions, for each of the 75 and 100 tonne lifting capacity products in the EH range are now available in both double trolley as well as the previously available 4 trolley traverse drive versions. The new twin trolley drive versions, which offer more compact units for operation where limited space is available, are designated as EH 75 C and EH 100 C. Standard Features ideally suited for working in hazardous areas (explosion protection) insensitive to humidity dust and temperatures from -20°C to +70°C low headroom, compact design favourable air consumption world wide service Special Features If you don’t find the right hoisting system for...

In 2015 the product name was changed. The old product name was Castrol Olistamoly 2. High-performance grease with MoS2 solid lubricants Description Castrol Molub-Alloy 370-2 (previous product name Castrol Olistamoly 2) is a high-performance grease with MoS2 solid lubricants for universal applications. Thanks to its high pressure absorption capacity, it is particularly suitable for long-term lubrication of rolling and plain bearings. Application Castrol Molub-Alloy 370-2 can be used for highly loaded roller and plain bearings, threaded spindles and guides of lifting devices, open gears, worm gears at low speeds, tie rod and universal joints, brake cams and splines, as well as in difficult operating conditions such as dust and vibrations. Castrol Molub-Alloy 370-2 is suitable for maintenance-free or low-maintenance long-term lubrication.

In 2015 the product name was changed. The old product name was Castrol Olistamoly 2. High-performance grease with MoS2 solid lubricants Description Castrol Molub-Alloy 370-2 (previous product name Castrol Olistamoly 2) is a high-performance grease with MoS2 solid lubricants for universal applications. Thanks to its high pressure absorption capacity, it is particularly suitable for long-term lubrication of rolling and plain bearings. Application Castrol Molub-Alloy 370-2 can be used for highly loaded roller and plain bearings, threaded spindles and guides of lifting devices, open gears, worm gears at low speeds, tie rod and universal joints, brake cams and splines, as well as in difficult operating conditions such as dust and vibrations. Castrol Molub-Alloy 370-2 is suitable for maintenance-free or low-maintenance long-term lubrication.

In 2015 the product name was changed. The old product name was Castrol Olistamoly 2. High-performance grease with MoS2 solid lubricants Description Castrol Molub-Alloy 370-2 (previous product name Castrol Olistamoly 2) is a high-performance grease with MoS2 solid lubricants for universal applications. Thanks to its high pressure absorption capacity, it is particularly suitable for long-term lubrication of rolling and plain bearings. Application Castrol Molub-Alloy 370-2 can be used for highly loaded roller and plain bearings, threaded spindles and guides of lifting devices, open gears, worm gears at low speeds, tie rod and universal joints, brake cams and splines, as well as in difficult operating conditions such as dust and vibrations. Castrol Molub-Alloy 370-2 is suitable for maintenance-free or low-maintenance long-term lubrication

Driving and conveyor chains of all designs in open or semi-enclosed operation without a re-lubrication device Roller chains such as motorcycle and bicycle chains Stacker truck chains as well as single or multiple flat-link articulated chains without a re-lubrication device Rope drives and wire pulls; for example, standing, hoisting, traction or winch ropes in hoisting gears, elevators, lifts or mountain railways Flexible drives, bowden and spring cables Moving machine parts exposed to outdoor weathering, such as toothed gearing, guides, closing mechanisms, hinges or sliding surfaces Advantages and benefits Highly effective due to outstanding creep and gap penetration properties Highly adhesive and resistant to throwing off Contains Moₓ-Active for increased performance Excellent wear protection Very good resistance to cold and hot water as well as to saline solutions Excellent corrosion protection O-ring neutral

Driving and conveyor chains of all designs in open or semi-enclosed operation without a re-lubrication device Roller chains such as motorcycle and bicycle chains Stacker truck chains as well as single or multiple flat-link articulated chains without a re-lubrication device Rope drives and wire pulls; for example, standing, hoisting, traction or winch ropes in hoisting gears, elevators, lifts or mountain railways Flexible drives, bowden and spring cables Moving machine parts exposed to outdoor weathering, such as toothed gearing, guides, closing mechanisms, hinges or sliding surfaces Advantages and benefits Highly effective due to outstanding creep and gap penetration properties Highly adhesive and resistant to throwing off Contains Moₓ-Active for increased performance Excellent wear protection Very good resistance to cold and hot water as well as to saline solutions Excellent corrosion protection O-ring neutral Also available as spray version OKS 451

Rigid stand for wall-mounting for tank volumes from 100 l. Mixer powers from 0.37 kW to 7.5 kW and support loads up to 100 kg can be realized. Under these conditions, the stand can be equipped with all fast running or gear-reduced mixers and their matching agitator elements. The lift is done by a geared hand-wheel or electric with a lift drive and chain drive. The mixer is positioned on a cantilever beam which is fixed to a support slide that is moved on the stand column. The electric or pneumatic supply is guided through a laterally mounted energy chain. The stand WRW is available in two standard sizes, thus enabling the processing of various tank sizes. The standard sizes are particularly designed for the processing of exchangeable vessels such as drums and IBCs.

Mobile stand with H-foot for tank volumes from 100 l. The mobility of the tripod is ensured by using castors and fixed castors. The tripod can be moved due to The lift is done by a geared hand-wheel or electric with a lift drive and chain drive. Mixer powers from 0.37 kW to 7.5 kW and support loads up to 100 kg can be realized (with ex-protection only realizable to a limited extend). Under these conditions, the stand can be equipped with all fast running or gear-reduced mixers and their matching mixing elements. The mixer is positioned on a cantilever beam which is fixed to a support slide that is moved on the stand column. The FRW is equipped with fixed and steerable wheels for mobility. The electric or pneumatic supply is guided through a laterally mounted energy chain. The mobile stand mixer FRW is available in two standard sizes that are particularly designed for the processing of exchangeable vessels such as drums and IBCs. Various tank sizes upon request.

Rigid stand with H-foot for tanks that range in volume from 100 l. Under these conditions, the stand can be equipped with all fast running or gear-reduced mixers and their matching mixing elements. Mixer powers from 0.37 kW to 7.5 kW and support loads up to 100 kg – by means of a reinforced stand loads up to 300 kg – can be realized. The agitator is positioned on a telescope sleeve that is moved via the spring-suspended lid connected to the stand. The lift is done by a geared hand-wheel or electric with a lift drive and chain drive. The mixer is positioned on a cantilever beam which is fixed to a support slide that is moved on the stand column. The electric or pneumatic supply is guided through a laterally mounted energy chain. The floor stand mixer SRW is available in two standard sizes that are particularly designed for the processing of exchangeable vessels such as drums and IBCs. Various tank sizes upon request.

FRW - Mobile stand mixer Mobile stand with H-foot for tank volumes from 100 l. The mobility of the tripod is ensured by using castors and fixed castors. The tripod can be moved due to The lift is done by a geared hand-wheel or electric with a lift drive and chain drive. Mixer powers from 0.37 kW to 7.5 kW and support loads up to 100 kg can be realized (with ex-protection only realizable to a limited extend). Under these conditions, the stand can be equipped with all fast running or gear-reduced mixers and their matching mixing elements. The mixer is positioned on a cantilever beam which is fixed to a support slide that is moved on the stand column. The FRW is equipped with fixed and steerable wheels for mobility. The electric or pneumatic supply is guided through a laterally mounted energy chain. The mobile stand mixer FRW is available in two standard sizes that are particularly designed for the processing of exchangeable vessels such as drums and IBCs. Various tank sizes upon...

SRW - Floor stand mixer Rigid stand with H-foot for tanks that range in volume from 100 l. Under these conditions, the stand can be equipped with all fast running or gear-reduced mixers and their matching mixing elements. Mixer powers from 0.37 kW to 7.5 kW and support loads up to 100 kg - by means of a reinforced stand loads up to 300 kg - can be realized. The agitator is positioned on a telescope sleeve that is moved via the spring-suspended lid connected to the stand. The lift is done by a geared hand-wheel or electric with a lift drive and chain drive. The mixer is positioned on a cantilever beam which is fixed to a support slide that is moved on the stand column. The electric or pneumatic supply is guided through a laterally mounted energy chain. The floor stand mixer SRW is available in two standard sizes that are particularly designed for the processing of exchangeable vessels such as drums and IBCs. Various tank sizes upon request.

KB Schmiedetechnik GmbH is a highly certified West German drop forge, located in Hagen (Westphalia) - between the historic "blade & metal" region Solingen and the "soccer city" Dortmund - specializing in small series production of safety-relevant closed die forgings from 200g to 130Kg unit weight of all steel grades including duplex stainless steels, nickel based and titanium alloys. Examples are forgings for mechanical applications like brackets, holders, hoists, forged lifting gear, slings, hooks, chain links, special screws, nuts, gearwheels/ toothed/ cog wheels, forged pinions, and pressure parts like forged valves for hydrogen production and nuclear energy, as well as forgings for boiler systems construction. These include forged parts for boilers and piping like fittings, flanges, bifurcations, hose pipes, and forged boiler parts like header caps, end pieces, manifolds. KB Schmiedetechnik produces forgings for high pressure applications according to ASME, PED, KTA, RCCM.

Drop-forgings of carbon and alloyed steel, nickel, duplex, titanium and superalloys like Monel® or Hastelloy®, Inconel®, Incoloy® for pressurized components like forged valves or valve parts like bodies and yokes or bonnets, flanges for boiler systems, fittings for piping, non-corroding parts for shipbuilding, marine technology, slings and lifting gear, hooks, eyebolts, nuts, chain links, military vehicles, transportation and defense. Every nut, bolt, and screw - forgings for harsh environments: forged valve bodies, bonnets, yokes and flanges, pipe connections, pressure applications like boiler parts, hoists, chain links, eyebolts, hydraulic components, corrosion and acid-resistant parts for chemical and fertilizer industries, as well as shipbuilding and drill equipment. Pressure equipment and nuclear power (valves, boilers, piping): PED 2014/68/EU, AD 2000-W0, ASME/ASTM, KTA, RCC-M Shipbuilding and maritime industry ABS, BV Marine & Offshore, DNV, LR Shipping, ClassNK

Forgings have a grain flow, like the fiber structure of wood, caused by plastic deformation during the forging process. Proper orientation of grain flow improves the physical properties of forged parts. Everyday examples for forgings are car wheel bolts or screw nuts. Further examples include all kind of fasteners and hoists including forged hooks, eyebolts, and chain links. Forgings are also part of complex assemblies like crawler track chains, articulation sockets for busses or trains, hydraulic systems and lifting gears, as well gearwheels (forged blanks), pinions, rollers, holders and supports. Made in Germany of European primary material KB Schmiedetechnik GmbH is a Western German drop forge, specialized in small series production of closed die forgings from 200g to 130Kg unit weight and up to 600mm length of all forgeable steel grades and superalloys according to: ISO 9001 + ISO 14001 ASME, PED, KTA, RCC-M ABS, BV, ClassNK, DNV, LR

The traction sheave hoist Gtrac admitted for the personal transport the costly scaffolding of a lift shaft is to be eliminated suitably. The lifting gear technology on the cabin roof is installed by tailormade adaptation, so that this can be used as a working platform. About an upper and lower pulley the resigning traction rope is led without ground touch and is free of soiling. As a safety barrier serves as a rule security brake belonging to lift. Security facilities like final disconnection, Overlooking and a supervision whether rope to end is, guarantees a reliable and sure function.

A - 218mm | L - 160mm | B- 58mm | D - 29mm | b - 36mm | l - 61mm CO connectors | grade 80 | nominal size 26mm Attention: These chain connectors shall not be used in loading and lifting gear. details: nominal size 26mm breaking load 85,0t weight 4,60kg Hammerlocks (chain connectors) for fishing gear. A lower cost alternative to the premium quality Trawlex connectors. When using these hammerlocks in conjunction with Trawlex grade 100 chain we suggest to choose the next bigger size of "CO" connectors. You then are on the safe side as far as breaking load is concerned and still you have a considerable advantage of saving costs. For safety reasons and also to avoid damages or loss of fishing gear we advise to use new pins and bushings when re-assembling hammerlocks after a longer period of use.

A - 70mm | L - 52mm | B- 19mm | D - 9mm | b - 13mm | l - 22mm CO connectors | grade 80 | nominal size 7mm Attention: These chain connectors shall not be used in loading and lifting gear. details: nominal size 7mm breaking load 8,0t weight 0,11kg Hammerlocks (chain connectors) for fishing gear. A lower cost alternative to the premium quality Trawlex connectors. When using these hammerlocks in conjunction with Trawlex grade 100 chain we suggest to choose the next bigger size of "CO" connectors. You then are on the safe side as far as breaking load is concerned and still you have a considerable advantage of saving costs. For safety reasons and also to avoid damages or loss of fishing gear we advise to use new pins and bushings when re-assembling hammerlocks after a longer period of use.

A - 198mm | L - 150mm | B- 49mm | D - 24mm | b - 34mm | l - 59mm CO connectors | grade 80 | nominal size 22mm Attention: These chain connectors shall not be used in loading and lifting gear. details: nominal size 22mm breaking load 60,0t weight 3,00kg Hammerlocks (chain connectors) for fishing gear. A lower cost alternative to the premium quality Trawlex connectors. When using these hammerlocks in conjunction with Trawlex grade 100 chain we suggest to choose the next bigger size of "CO" connectors. You then are on the safe side as far as breaking load is concerned and still you have a considerable advantage of saving costs. For safety reasons and also to avoid damages or loss of fishing gear we advise to use new pins and bushings when re-assembling hammerlocks after a longer period of use.

A - 168mm | L - 122mm | B- 47mm | D - 23mm | b - 33mm | l - 46mm CO connectors | grade 80 | nominal size 19mm Attention: These chain connectors shall not be used in loading and lifting gear. details: nominal size 19mm breaking load 50,0t weight 1,58kg Hammerlocks (chain connectors) for fishing gear. A lower cost alternative to the premium quality Trawlex connectors. When using these hammerlocks in conjunction with Trawlex grade 100 chain we suggest to choose the next bigger size of "CO" connectors. You then are on the safe side as far as breaking load is concerned and still you have a considerable advantage of saving costs. For safety reasons and also to avoid damages or loss of fishing gear we advise to use new pins and bushings when re-assembling hammerlocks after a longer period of use.

A - 140mm | L - 100mm | B- 40mm | D - 20mm | b - 27mm | l - 40mm CO connectors | grade 80 | nominal size 16mm Attention: These chain connectors shall not be used in loading and lifting gear. details: nominal size 16mm breaking load 32,0t weight 1,05kg Hammerlocks (chain connectors) for fishing gear. A lower cost alternative to the premium quality Trawlex connectors. When using these hammerlocks in conjunction with Trawlex grade 100 chain we suggest to choose the next bigger size of "CO" connectors. You then are on the safe side as far as breaking load is concerned and still you have a considerable advantage of saving costs. For safety reasons and also to avoid damages or loss of fishing gear we advise to use new pins and bushings when re-assembling hammerlocks after a longer period of use.

A - 118mm | L - 86mm | B- 32mm | D - 16mm | b - 23mm | l - 36mm CO connectors | grade 80 | nominal size 13mm Attention: These chain connectors shall not be used in loading and lifting gear. details: nominal size 13mm breaking load 21,6t weight 0,62kg Hammerlocks (chain connectors) for fishing gear. A lower cost alternative to the premium quality Trawlex connectors. When using these hammerlocks in conjunction with Trawlex grade 100 chain we suggest to choose the next bigger size of "CO" connectors. You then are on the safe side as far as breaking load is concerned and still you have a considerable advantage of saving costs. For safety reasons and also to avoid damages or loss of fishing gear we advise to use new pins and bushings when re-assembling hammerlocks after a longer period of use.