Results for
LAWECO MASCHINEN- UND APPARATEBAU GMBH
Germany
The innovative LAWECO CHAIN-LINE lifting platform technology unites all advantages of belts and spindles. Mechanically driven by a push-chain, this technology achieves maximum performances without the use of hydraulic oil. Due to a particularly harmonious motion sequence and the excellent load change behaviour in each lift position, the CHAIN-LINE is the preferred solution for designers who place an extremely high value on efficiency and precision for their area of responsibility. Unsurpassed precision LAWECO push-chain lifting platforms convince with a load behaviour and maximum positioning precision which were almost unachievable in the past. Unrestricted availability Almost maintenance free, the robust and low failure construction permits fast component replacement. Safety for the environment and employees The intelligent design does without hydraulic oil. Optional contact rails and bellows increase safety.
Request for a quoteSPANSET SECUTEX GMBH
Germany
The attachment chain may only be used as an attachment accessory without edge protection if a 20% reduction in load lifting capacity is taken into consideration or if the nextlargest chain thickness is used. Otherwise, a secutex SKK hinged edgeprotector must be used. A “sharp edge” exists when the edge radius is smaller than the nominal thickness of the lifting chain. Further information is available in the “sharp edge“ chapter.
Request for a quoteLAWECO MASCHINEN- UND APPARATEBAU GMBH
Germany
The latest development in lifting platform technology is based on mechanical drive technology using belts. Hydraulic oil is not required. Due to a patented catch system, BELT-LINE meets the safety requirements laid down in DIN EN 1570. The combination of exemplary positioning accuracy, smooth running and long service life is the reason the BELT-LINE is an economical precision solution, and not only for sensitive areas. Exemplary smooth running BELT-LINE convinces with a low noise and harmonious movement sequence, paired with maximum lifting speed and positioning precision. Minimum maintenance time and costs without hydraulic oil In particular in sensitive areas, the robust BELT-LINE technology with its long operating life is the best possible solution. The low-wear components can be quickly replaced due to the modular design. Excellent load change behaviour In the design phase, particular emphasis was placed on developing an excellent load change behaviour. The resilient suspension behaviour is only surpassed by LAWECO push-chain lift platforms.
Request for a quoteGSW SCHWABE AG
Germany
Upenders are designed to safely tilt big and heavy coils – either from horizontal into vertical or reversed. This fast and easy coil handling solution gets rid of “adventurous” tilting methods that often will endanger the operator. Chains and other lifting aids which damage the coil rims become obsolete. Upenders allow 90 degrees tilting of coils; Combination machines will also rotate 180 degrees. Both can handle up to 25 tons.
Request for a quoteFERPLAST SNC
Italy
MMANUAL LIFTER FOR PALLETS MOD. FPSDJ 1500 - shipped fully assembled! Pallet lifter with hydraulic foot pump and rudder (for low weight can use the pedal), steel frame with fork tip rounded, directional nylon wheels with brakes and double rollers, fixed width forks. The model FP SDJ 1500 is equipped with double chain for lifting. WARNING: all the elevators are shipped pre-assembled, tested one by one before packing in a professional manner and with CE certification. The elevators FPSDJ are very practical and robust, recommended where the paving is smooth (eg warehouses) where the occasional and not continuous lifting of pallets does not justify the purchase of a battery model. The structure and operation are similar to those of a standard pallet truck. You can lift the load both through rudder or pedal. For each pumping the forks are raised about 3 cm. The descent is done by pressing the lever on the rudder. And it is controlled and at a safety speed.
Request for a quoteGEPPERT RÜHRTECHNIK GMBH
Germany
Double column wall mounted stand mixer/floor stand mixer Rigid stand for wall-mounting or floor stand for mixers from 100 kg. The stand consists of 2 u-shaped columns with a ball-borne support slide with a cantilever beam for the mixer. The double-column stand allows the processing of tank volumes up to 4 m3, depending on the tank dimensions. Mixer powers up to 75.0 kW and support loads up to 1,000 kg can be realized. Under these conditions, the stand can be equipped with all fast running or gear-reduced mixers and their matching agitator elements. The lift is done electrically by a lift drive and chain drive. The electric supply is guided through a laterally mounted energy chain. Customized solutions for instance a stand mixer with H foot or stand equipped with coaxial agitator type KRK are feasible.
Request for a quoteGEPPERT RÜHRTECHNIK GMBH
Germany
Rigid stand for wall-mounting for tank volumes from 100 l. Mixer powers from 0.37 kW to 7.5 kW and support loads up to 100 kg can be realized. Under these conditions, the stand can be equipped with all fast running or gear-reduced mixers and their matching agitator elements. The lift is done by a geared hand-wheel or electric with a lift drive and chain drive. The mixer is positioned on a cantilever beam which is fixed to a support slide that is moved on the stand column. The electric or pneumatic supply is guided through a laterally mounted energy chain. The stand WRW is available in two standard sizes, thus enabling the processing of various tank sizes. The standard sizes are particularly designed for the processing of exchangeable vessels such as drums and IBCs.
Request for a quoteGEPPERT RÜHRTECHNIK GMBH
Germany
Mobile stand with H-foot for tank volumes from 100 l. The mobility of the tripod is ensured by using castors and fixed castors. The tripod can be moved due to The lift is done by a geared hand-wheel or electric with a lift drive and chain drive. Mixer powers from 0.37 kW to 7.5 kW and support loads up to 100 kg can be realized (with ex-protection only realizable to a limited extend). Under these conditions, the stand can be equipped with all fast running or gear-reduced mixers and their matching mixing elements. The mixer is positioned on a cantilever beam which is fixed to a support slide that is moved on the stand column. The FRW is equipped with fixed and steerable wheels for mobility. The electric or pneumatic supply is guided through a laterally mounted energy chain. The mobile stand mixer FRW is available in two standard sizes that are particularly designed for the processing of exchangeable vessels such as drums and IBCs. Various tank sizes upon request.
Request for a quoteGEPPERT RÜHRTECHNIK GMBH
Germany
Rigid stand with H-foot for tanks that range in volume from 100 l. Under these conditions, the stand can be equipped with all fast running or gear-reduced mixers and their matching mixing elements. Mixer powers from 0.37 kW to 7.5 kW and support loads up to 100 kg – by means of a reinforced stand loads up to 300 kg – can be realized. The agitator is positioned on a telescope sleeve that is moved via the spring-suspended lid connected to the stand. The lift is done by a geared hand-wheel or electric with a lift drive and chain drive. The mixer is positioned on a cantilever beam which is fixed to a support slide that is moved on the stand column. The electric or pneumatic supply is guided through a laterally mounted energy chain. The floor stand mixer SRW is available in two standard sizes that are particularly designed for the processing of exchangeable vessels such as drums and IBCs. Various tank sizes upon request.
Request for a quoteGEPPERT RÜHRTECHNIK GMBH
Germany
WRW/SRW – Double column Double column wall mounted stand mixer/floor stand mixer Rigid stand for wall-mounting or floor stand for mixers from 100 kg. The stand consists of 2 u-shaped columns with a ball-borne support slide with a cantilever beam for the mixer. The double-column stand allows the processing of tank volumes up to 4 m3, depending on the tank dimensions. Mixer powers up to 75.0 kW and support loads up to 1,000 kg can be realized. Under these conditions, the stand can be equipped with all fast running or gear-reduced mixers and their matching agitator elements. The lift is done electrically by a lift drive and chain drive. The electric supply is guided through a laterally mounted energy chain. Customized solutions for instance a stand mixer with H foot or stand equipped with coaxial agitator type KRK are feasible.
Request for a quoteGEPPERT RÜHRTECHNIK GMBH
Germany
WRW - Wall mounted stand mixer Rigid stand for wall-mounting for tank volumes from 100 l. Mixer powers from 0.37 kW to 7.5 kW and support loads up to 100 kg can be realized. Under these conditions, the stand can be equipped with all fast running or gear-reduced mixers and their matching agitator elements. The lift is done by a geared hand-wheel or electric with a lift drive and chain drive. The mixer is positioned on a cantilever beam which is fixed to a support slide that is moved on the stand column. The electric or pneumatic supply is guided through a laterally mounted energy chain. The stand WRW is available in two standard sizes, thus enabling the processing of various tank sizes. The standard sizes are particularly designed for the processing of exchangeable vessels such as drums and IBCs.
Request for a quoteGEPPERT RÜHRTECHNIK GMBH
Germany
FRW - Mobile stand mixer Mobile stand with H-foot for tank volumes from 100 l. The mobility of the tripod is ensured by using castors and fixed castors. The tripod can be moved due to The lift is done by a geared hand-wheel or electric with a lift drive and chain drive. Mixer powers from 0.37 kW to 7.5 kW and support loads up to 100 kg can be realized (with ex-protection only realizable to a limited extend). Under these conditions, the stand can be equipped with all fast running or gear-reduced mixers and their matching mixing elements. The mixer is positioned on a cantilever beam which is fixed to a support slide that is moved on the stand column. The FRW is equipped with fixed and steerable wheels for mobility. The electric or pneumatic supply is guided through a laterally mounted energy chain. The mobile stand mixer FRW is available in two standard sizes that are particularly designed for the processing of exchangeable vessels such as drums and IBCs. Various tank sizes upon...
Request for a quoteGEPPERT RÜHRTECHNIK GMBH
Germany
SRW - Floor stand mixer Rigid stand with H-foot for tanks that range in volume from 100 l. Under these conditions, the stand can be equipped with all fast running or gear-reduced mixers and their matching mixing elements. Mixer powers from 0.37 kW to 7.5 kW and support loads up to 100 kg - by means of a reinforced stand loads up to 300 kg - can be realized. The agitator is positioned on a telescope sleeve that is moved via the spring-suspended lid connected to the stand. The lift is done by a geared hand-wheel or electric with a lift drive and chain drive. The mixer is positioned on a cantilever beam which is fixed to a support slide that is moved on the stand column. The electric or pneumatic supply is guided through a laterally mounted energy chain. The floor stand mixer SRW is available in two standard sizes that are particularly designed for the processing of exchangeable vessels such as drums and IBCs. Various tank sizes upon request.
Request for a quoteKB SCHMIEDETECHNIK GMBH - A GERMAN DROP FORGE - CLOSED DIE FORGINGS - ALL STEEL GRADES
Germany
KB Schmiedetechnik GmbH is a highly certified West German drop forge, located in Hagen (Westphalia) - between the historic "blade & metal" region Solingen and the "soccer city" Dortmund - specializing in small series production of safety-relevant closed die forgings from 200g to 130Kg unit weight of all steel grades including duplex stainless steels, nickel based and titanium alloys. Examples are forgings for mechanical applications like brackets, holders, hoists, forged lifting gear, slings, hooks, chain links, special screws, nuts, gearwheels/ toothed/ cog wheels, forged pinions, and pressure parts like forged valves for hydrogen production and nuclear energy, as well as forgings for boiler systems construction. These include forged parts for boilers and piping like fittings, flanges, bifurcations, hose pipes, and forged boiler parts like header caps, end pieces, manifolds. KB Schmiedetechnik produces forgings for high pressure applications according to ASME, PED, KTA, RCCM.
Request for a quoteKB SCHMIEDETECHNIK GMBH - A GERMAN DROP FORGE - CLOSED DIE FORGINGS - ALL STEEL GRADES
Germany
Drop-forgings of carbon and alloyed steel, nickel, duplex, titanium and superalloys like Monel® or Hastelloy®, Inconel®, Incoloy® for pressurized components like forged valves or valve parts like bodies and yokes or bonnets, flanges for boiler systems, fittings for piping, non-corroding parts for shipbuilding, marine technology, slings and lifting gear, hooks, eyebolts, nuts, chain links, military vehicles, transportation and defense. Every nut, bolt, and screw - forgings for harsh environments: forged valve bodies, bonnets, yokes and flanges, pipe connections, pressure applications like boiler parts, hoists, chain links, eyebolts, hydraulic components, corrosion and acid-resistant parts for chemical and fertilizer industries, as well as shipbuilding and drill equipment. Pressure equipment and nuclear power (valves, boilers, piping): PED 2014/68/EU, AD 2000-W0, ASME/ASTM, KTA, RCC-M Shipbuilding and maritime industry ABS, BV Marine & Offshore, DNV, LR Shipping, ClassNK
Request for a quoteKB SCHMIEDETECHNIK GMBH - A GERMAN DROP FORGE - CLOSED DIE FORGINGS - ALL STEEL GRADES
Germany
KB Schmiedetechnik GmbH is a drop forge in West Germany, located between the historic “blade & metal region” Solingen and the “soccer city” Dortmund, specializing in small series production of safety-relevant closed die forgings from 200g to 130Kg unit weight of all steel grades and alloys according to following certifications and standards: pressure equipment: valves, boiler systems, piping PED 2014/68/EU, AD 2000-W0, ASME/ASTM, CNIM, Alstom, MHPS nuclear power/ atomic energy and plant construction KTA3201.1, KTA1401, AVS D 100/50, Siemens, EDF/Areva/RCC-M naval architecture/ shipbuilding and offshore/ ocean engineering, certified by • American Bureau of Shipping (ABS) • Bureau Veritas Marine & Offshore(BV) • Det Norske Veritas (DNV) • Lloyd´s Register (LR) • Nippon Kaiji Kyōkai (ClassNK) Examples: components and equipment like brackets, holders, chain links, hoists, lifting hooks, fasteners, pressure-bearing parts like valve bodies, pipe connections, gearwheels, ...
Request for a quoteAEROLIFT INDUSTRIALS B.V.
Netherlands
Sheet metal handling and lifting steel plates with vacuum technology. Both magnetic and non-magnetic sheets are easily lifted. The suction pad is placed on the metal product, after which the vacuum is activated by a push on the button. Now you can lift, move, or even turn the sheet metal. Vacuum lifting is used during production, storage, internal transport, transhipment, and construction. Besides vacuum lifters for metal plates, we also design pipe handling equipment. All our designs are custom made to perfectly match the individual situation. Why choose lifting plates by vacuum? Vacuum offers unique advantages compared to other lifting methods to lift plates, such as chains, clamps, and magnets. Chains and clamps can be used to lift non-magnetic plates, such as aluminium, copper, and stainless steel. Compared to these lifting methods, vacuum offers distinct advantages: No damage to the plate, not even scratches No spacers or stoppers required Easy and fast handling Less manpower
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
ZIMAS ZINCIR VE MAKINA SAN. TIC. A.S
Turkey
This type of chains are self perforated compared to other chains. These chains, designed specifically for their intended use, can be assembled by making a pin connection from the holes of the two opposing chains in order to fulfill the functionality within the system. They are usually chains that work in the transport product or cabinet lifts. These chains are shipped as mutually matched, stretched and marked.
Request for a quoteBAUSHOP EXPRESS GMBH
Germany
The Böcker mini crane is the ideal tool for moving large-format construction elements. Safe and error-free working as well as a significant acceleration of the working process are guaranteed by all mini crane models. - Hook height 4.5 m, telescopic to 6.0 m - Completely hot-dip galvanized (frame, tower, jib) - Trolley with electric motor drive - Wheel breakage protection and foot protection as standard equipment - Spindle lifting gear for electric motor-driven raising and lowering of mast and boom - Hoist with quick and fine lift, 8 m chain and load hook - Water-repellent protective hood - Optional rotary and cross travel drives, each with two speeds, rotary drive can be easily disengaged - One-tong system guarantees effective working Smooth-running rotating device ensures easy working - Low-backlash locking of the tower - Concrete ballast weight 650 kg / 960 kg with practical transport lug - Due to inclined position, up to 5 mini cranes can be loaded on one truck
Request for a quoteBOSCARO SRL
Italy
Man baskets up to 10 person capacity and man baskets for emergency evacuation. Our crane man baskets are equipped with a tool tray, four legs lifting chains, harnesses, entrance door and handrail. The castor rollers prevent damage to the buildings. The removable roof allows the basket to be used in a wide variety of projects! Available on request a rescue stretcher for the emergency evacuation man baskets.
Request for a quoteKETTEN WÄLDER GMBH
Germany
The right chain for your lifting equipment: our cromox hoist chains are tested and manufactured according to DIN 5684. Suitable for both manually and motor driven hoists.
Request for a quoteKÖRBER SUPPLY CHAIN AUTOMATION EISENBERG GMBH
Germany
Advantages • Quick throughput times, high processing exactness as well as improved working conditions through optimally planned material flow • Compatible components reduce interfaces • Large assortment of standard components: Belt Conveyors: • Curved Belt Conveyors • Small Belt Conveyors • Inclined Belt conveyors Roller Conveyors: • Wheel Conveyors • Light Roller Conveyors • Roller Conveyor Curves • Gravity Roller Conveyors • Driven Roller Conveyors Chain Conveyors: • Chain Conveyors • Traction Lifts Product transportation is an essential element of in-plant logistics. Exact and precise handling is a prerequisite for optimal material flow. Belt conveyors are ideal for transporting light to moderately heavy products. Roller conveyors can be adapted to a variety of space conditions. They are used for transporting light as well as heavy products, are impervious to dust and thus ideal for use in dusty environments.
TAMA AERNOVA SRL
Italy
The horizontal cartridge filter OPF-P manufactured by Tama Aernova can be used in various fields of application for a wide range of different types of dust. Moreover, customers can combine its main components by themselves, depending on their specific needs and the type of use intended. Benefits Smaller footprint: Easy to install, can be transported in a container. Low noise emission: = 80dB(A)*. Improved performance: performance up to +20%. Easy maintenance Easy to move: equipped with special connections, so it can easily be lifted with chains or a forklift. Standard equipment Integrated non-return valve: prevents dust from exiting the dust collector during post-cleaning operations. Integrated pressure regulator Integrated fan Integrated electrical panel Mobile system for manually moving the dust collector Optionals available Integrated pre-separator: increases the durability of filter elements by capturing incandescent and smaller particles. Can be installed both indoors and...
Request for a quoteGORACON SYSTEMTECHNIK GMBH
Germany
In football stadiums, venue regulations apply, which stipulate that 1% of all spaces must be reserved for wheelchair users. Hardly any club in the German Bundesliga meets these requirements. The seats for persons accompanying the wheelchair users are attached using the rail guide from goracon and can be moved forwards and backwards in a flexible manner. The capacity of the wheelchair spaces can thus be increased by up to 50%. A positive sideeffect is that the spaces can be marketed in line with market requirements if they are not used by wheelchair users. This was not possible until now because the places for accompanying persons hardly allowed any view of the playing field.
Request for a quoteGORACON SYSTEMTECHNIK GMBH
Germany
Fundamentals of Chair guidance systems. The heart of the system is a high precision rail guiding a sled, both mounted in a cuboidlike housing. As the rail is mounted on the angularmilled surface, the sled is forced by gravity to return to its intended position. To avoid placing undue tension on the moving sled, only one rail is used. To solidly connect the chair leg socket to the carriage sled, it is sufficient to simply stick the stem into the conical aperture and fix it with a screw. The chair either with fixed leg or multifunctional leg with integrated twist mechanism can now be mounted onto the chair leg socket. A special feature of this multifunction leg is the height adjuster and the twist mechanism that always rotates back to its starting position as the seat moves back to its initial position. The specialized pneumatic height adjuster must be included in the chair manufacturer’s scope of delivery for the chair tender or shall be coordinated with goracon.
Request for a quoteResults for
Lifting chain - Import exportNumber of results
26 ProductsCountries
Company type
Category