Infrared sensors - Import export

For the production of reeled resistors or sheet goods in calenders the thickness measurement is a vital factor for controlling and monitoring the production process. By applying systems of the RTP series, the profile thickness can be measured in various accuracy classes, thickness ranges and material widths.

Produce your air cushions automatically to avoid unnecessary waiting times. Once the stock level is reached, your AirWave1 or AirWave2 automatically stops the production using the level sensor. The machine automatically starts again as soon as cushions are removed from the container. The level sensor with infrared light barrier has a sensor range up to 400 mm. Fits the AirWave1 and AirWave2 air cushion machine. Cable length: 1.35 meters

The infrared temperature sensor from Therma is perfect for measuring the current tyre temperature. The temperature of the tyre and thus the associated effects are decisive factors for success in motor sports. The tyre pressure is strongly temperature-dependent. The measurements collected by the sensor permit conclusions to be drawn for ideal vehicle tuning. Large fluctuations have a direct effect on the vehicle performance and the service life of the tyre.

Our product portfolio guarantees maximum flexibility for temperature measurement. The temperature sensors of the TS series offer tailor-made solutions by simple programming, flexible process connections and displays. The TTM/TTMS series includes a number of compact sensors - optionally with integrated probe or with M12 connector for separate probes. The T-Gage infrared sensors contactlessly measure temperatures from 0 to 300 °C. The TP-series includes temperature probes in various lengths and diameters.

Germanium wafers are a semiconductor material & therefore are a smart choice for microelectronics. Due to its unique electric properties, it is widely used for sensors, solar cells and infrared optical applications. The wafers are also great for microelectronics as the space is limited and being available in 500μm or less it makes it perfect to achieve the high quality results required. It’s thermal conductivity makes it a good alternative to silicon. Our stock wafers are produced as thin as 500μm and provide exceptional surface quality. However, we can manufacture to a fully customised specification with a wafer thickness as little as 10 μm. Typical specifications of our germanium wafers are: 10mm – 150mm in diameter <500μm in thickness Doped and undoped Germanium

With our infrared pyrometers you are able to finely control the exact heating of your production processes and guarantee point perfect temeperatures and repeatability of your process.

The Thermalert TX infrared temperature sensors are available with remote addressability, easily installed in multidrop configurations. TX Series Smart Sensors communicate over a simple loop-powered 2-wire cable using the HART (Highway Addressable Remote Transducer) protocol. This signal combines industry-standard 4-20 mA output with simultaneous digital communications. They include Raytek DataTemp® Multidrop software, providing an easy-to-use interface for configuration and monitoring. Temperatures can be archived or exported to other applications for analysis and process documentation. Smart TX sensors feature remotely adjustable temperature and output subranges, adjustable emissivity, ambient temperature check, and a user-defined alarm output. Averaging and Advanced Peak/Valley Hold algorithms are provided for accurate measurement of complex discrete processes.

Improve process control with wide choice of spectral ranges and focus distances designed specifically for your application Reduce setup time with plug-and-play technology and integrated laser sighting Protect your process and employees with intrinsically safe ATEX/IECEx/CCC-IS certification Choose from options of analogue and digital communication protocols Designed for harsh environments, Thermalert 4.0 Series Pyrometers provide accurate, real-time temperature measurements for process control applications spanning metals, plastics, glass, oil and gas, food and more. This robust solution comes in a compact, integrated package that is easy to install and operate, so you can take your process control to the next level.The Thermalert 4.0 Series Pyrometers from Fluke Process Instruments include numerous integrated infrared temperature sensors with our widest selection of spectral ranges that can be used for a wide variety of process control applications.

The infrared thermoMETER CS temperature sensors are equipped with a miniature sensor that is particularly suitable for installation in confined spaces. The small size and temperature resistance up to 120°C open up a wide range of applications.The infrared temperature sensors are available in different versions, e.g., with laser aiming or as a two-wire version for easy integration.

Built-in advanced infrared sensor, auto clamping firmly once place your phone. Mount on air vent or installed on dashboard with the suction cup. 10W fast charging with a Type C cable. Compatible with all mobile phones with Qi wireless charging function.

Thermo Sensors are needed in any controlled heating process. For various applications different types of thermocouples are obtainable. Most common are thermocouples (TC) and resistance sensors (RS). Both types are available in the same executions as a matter of princible. For non-contact measuring infrared sensors are the rights choice, either in stationary executions or as portable measuring instrument.

Disinfectant dispenser with automatic spraying system. with wooden mounting Sensor range 0-12 cm (infrared sensor) Battery life (type AA) 1000 hours (batteries not included) 1000ml filling quantity Quantity per spraying process 1.2 ml Including security key for filling

The ICE 4, which was jointly developed by Siemens and Bombardier, is fitted with GRP door supports from TC. The door supports are installed immediately above the sliding doors. The 14 different types of door support are based on a GRP pultruded profile. The door support is a highly complex component which TC has once again been about to demonstrate its performance as a systems supplier. It consists of different aluminium profiles, brackets for the power supply and emergency brake, and infrared sensors. In addition, many door supports are fitted with a lockable flap and toilet ‘occupied’ displays. All of the adhesive bonds on the door support meet the requirements of DIN 6701. The entire door support is painted in two colours.

Provides Consistent, Accurate Responses to Next Generation Refrigerant As the first accurate, reliable, highly sensitive, cordless refrigerant leak detector, the original D-TEK revolutionized the field. Now we have built on that technology leadership with the D-TEK CO2, the only hand-held refrigerant leak detector designed especially to detect carbon dioxide, the next generation refrigerant. The D-TEK CO2 uses an innovative infrared absorption sensing cell which is extremely selective to carbon dioxide, yet its circuitry allows the instrument to equalize to the CO2 present in the atmosphere, so there is minimal risk of false alarms. D-TEK CO2 maintains its sensitivity over time for consistent, accurate and reliable performance. Its specialized infrared sensor cell lasts for approximately 1,000 hours, so you buy fewer replacement parts. Additional features include a charging status indicator, sensor failure indication, sensor test mode and rechargeable NiMH (nickel metal...

IRwin® Methane Leak Detector is an innovative, portable natural gas detector for easy gas pipe survey and gas leak detection. It is developed in accordance with many national directives, such as the DVGW (Deutscher Verband des Gas- und Wasserfaches) directive. The IRwin SX-models are certified for use in Zone 0, classification Ex II 1G, Ex ia IIC T3 Ga. The integrated proprietary infrared sensor system (patents pending) has a fast reaction and short recovery time. The system prevents false leak alarms and ensures correct and fast leak evaluation. The specially developed Gas Chromatograph (GC) and IR-sensor combination allows fast distinction between marsh gas and natural gas from all known natural gas sources. The IRwin GC gives fast test results, even at low ethane concentrations, from 1000 ppm methane leaks. IRwin is able to measure methane according to the traditional operating modes required by DVGW G 465-4, such as "Inspection above-ground" and "Measuring bar holes". The...

EGE infrared detectors are used to detect hot objects and to record and measure temperatures. The sensors detect the infrared radiation of warm and hot objects from 20° C to 800 ° C. EGE infrared detectors are designed for use under extreme conditions. With their glass and stainless steel housing they are water-tight according to IP 68 / IP 69. With attachment optics can be used at an ambient temperature up to 500° C. An optional blow-out system makes the sensors insensitive to contamination of the optics. The detectors are, for example, used to detect steel girders or hot rolled wire as well as for the contactless temperature control of brewer’s barley in germination tanks.

MSD Mega Speed Dynamometer is the latest Magtrol innovation in the very high-speed motor and system testing. Challenged by its numerous customers in the Dental and Surgical field, Magtrol is pushing the limit to a level which was never reached. The braking effect is based on Eddy-Current induced on an aluminum disc directly mounted on the DUT (Device Under Test) shaft. Torque is measured frictionless by a 20 mN·m Reaction Torque Sensor having a resolution of 0.01 mN·m. Due to the thermal effect on the disc, the Mega Speed Dynamometer is not suit­able for endurance testing, but can be used to generate a fast curve or perform point to point testing. An infrared sensor monitors the temperature of the disc and stops the test in case of overheating. The disc can be designed and sized according to the motor parameters. The system is contactless therefore alignment is not critical and the inertia is very low (no friction, no residual or drag torque).... more info: www.magtrol.com

Thermalert 4.0 infrared temperature sensors provide accurate temperature measurement from -40 °C to 2250 °C (-40 °F to 4082 °F) for a wide variety of process control applications. • Durable stainless steel IP65 / NEMA4 enclosures designed to withstand ambient temperatures from -20 °C to 85 °C (-4 °F to 185 °F) • Integrated laser sighting • Galvanically insulated outputs • Plastic lens option for food applications • Analog input for ambient compensation and adjusting emissivity setting • Multiple interfaces – 2-wire loop powered for analog and digital communication – 12 wires M16 and 6-pins terminal block for digital communication (RS485) • USB for easy setup • Simple, two-wire or digital installation • Advanced signal processing • Wide choice of focus distances • 2-year guarantee The program includes various models and accessories. The DataTemp® Multidrop software enables easy configuration and process monitoring on a real-time graphical display.

Temperature range: 250 °C to 3200 °C 4-year warranty Durable IP65 (NEMA4) housing Manual Variable focus Sighting options: Laser through the lens and Visible through the lens Video Camera through the lens and Visible through the lens LED through the lens and Visible through the lens LAN/Ethernet interface with PoE for sensor communication (ASCII, Video, and Webserver) Profinet interface option Programmable relay output Fail-safe alarm Isolated analog input/output Rugged stainless-steel housing Dirty-window alarm Endurance software for remote configuration, remote monitoring and field calibration Single or two color models available APPLICATIONS Metals processing: molten metal/forging, hot rolling mills, rod/wire mills Heat treating & annealing Induction heating Lightbulb and halogen lamp production Glass melting Semiconductor furnaces Cement & lime kilns Refuse burning Carbon graphite production Foundry & welding Rubber & thick plastic

The infrared sensor head tolerates ambient temperatures up to 315°C without cooling. Separated from the rugged electronics housing by a flexible fiber-optic cable, it may be positioned near the measured target. The sensor head is non-conductive and offers improved immunity to RFI and EMI interference. Temperature range 250 – 3200°C 4-year warranty Durable IP65 (NEMA4) housing Laser sighting option LAN/Ethernet interface with PoE for sensor communication Profinet interface option Programmable relay output Fail-safe alarm Isolated analog input/output Rugged stainless-steel housing Dirty-window alarm Endurance software for remote configuration, remote monitoring, and field calibration One or two-color models available APPLICATIONS Primary & secondary metals production Induction heating Lightbulb, halogen lamp production Glass melting Semiconductor furnaces Cement/lime kilns Refuse burning Carbon graphite production Rubber & thick plastics

The principle of operation is based on the operation of two channels working on two different physical principles of detection: monostatic microwave and monostatic infrared. We use the sensor FM-30 for microwave channel of MIR sensors. That is why all the advantages and features of FM are appropriate to MIR sensors, especially: - the sensors detection zone is divided into sub zones, every sub zone can be configured separately, any sub zone can be disconnected to make secured passages for people or transport through gates. - using of special software via USB or RS-485 interfaces allows to configure correctly the sensor in-field as well as remotely from the guard room. - the sensors have 5 frequency letters allowing to install and operate them near each other. The sensors MIR-M30 have beam-shaped detection zone, that is why we recommend to use them for the protection of "frontiers".

FIND PROFIT-CRUSHING LEAKS IN NO TIME D-TEK Stratus combines the superior leak detection of INFICON D-TEK leak detectors with the cloud hunting capability of a portable monitor all in one hand-held unit. Quickly locate the area containing the leak using the large, easy-to-read LCD display, and then pinpoint the leak all with one instrument! D-TEK Stratus is the next big thing in refrigerant leak detection. All new, redesigned infrared sensor New lithium ion battery

With the docking station solution, your air cushion machine AirWave1/2 is able to show its performance. No volume is too large for rapid filling. Thanks to the fast and automated operation, the docking station will fill one container after another. Package contents: Mobile table (LxBxH: 50x50x121 cm) Rolling basket (LxBxH: 90x60x140 cm) Infrared sensor for the AirWave1/2

The button is equipped with LED confirmation and audible pedestrian guidance and confirmation of acceptance of different frequencies. The use of LEDs as opposed to incandescent systems for low power consumption and long life. Pedestrian button is designed with care for people with disabilities, equipped with vibration pad and additional request signal allowing for a longer time of green signal for safe street crossing. The button is available in wired and wireless which makes its installation and replacement more versatile than any other button. We also offer contactless functionality. Now there is no need to press the button to turn on the green light, just raise your hand. The device contains an infrared sensor, which activates the red light – the same if you were to push the button.

Compur Statox 502 Control - and Common Alarm Module The All – Rounder in Gas Detection No matter if you want to detect toxic or combustible gases: This control module works with any sensor head. It provides the power supply and processes the signal. Three highly rated relays and a 4 – 20 mA output are the interfaces to peripheral instrumentation. Potential front ends may be the Statox 501 or Statox 505 transmitters with electrochemical or infrared sensors, or sensor heads with a Wheatstone bridge signal such as Statox 501 PID, catalytic or the Statox 501 LC and MC series with infrared sensors. Just by the push of a button you can program the module to handle 4 – 20 mA sink or source. Even the bridge voltage can be set to any value between 2 and 5.2 V, it even works with sensor heads of other manufacturers. So there is no restriction at all when selecting the appropriate sensor head for you application. With its two “sense” lines it can even compensate the voltage drop in the cable for very remote sensor heads or if there are extreme temperature variations. For maximum flexibility the measuring range is user programmable. You can also select the unit, no matter if it is ppb, ppm, % LEL or % volume. Easy installation The control module is mounted on a standard DIN rail. With an optional power rail you can interface the 24 V DC power and the alarm signals. This way you can program one of the modules to operate as a common alarm module. Even this function can be programmed just by push button. The application of a control module as a common alarm module is a very useful feature. It displays when any of the modules goes into Alarm 1, 2 or system alarm, and controls peripheral alarm devices. All electrical contacts are located easily accessible on the front side. The terminals for alarm signals, analog output, sensor head connection run into 6 pluggable terminal blocks. This makes not only the first installation quick and easy, but also any service event or system modification. A module can easily be removed out of its row, without interrupting its neighbors or disconnecting wires. Intuitive User Interface You want a gas detection system that needs little or no attention. No matter if setting the initial parameters or performing scheduled calibrations or proof tests: The handling shall be safe, quick and easy. The password - protected Statox 502 software structure is so clear that most menu items are self - explanatory. The “Reset” button brings you time back into the measuring mode at any time. Even if you have to interrupt your work and forget to reset, the watchdog function returns the system into the measuring mode, if no button has been pushed for a while. Functional safety paired with utmost system flexibility The Statox 502 complies with the standards DIN EN 61508 and 61511 functional safety, level SIL 2. In context with the HRC or ARE sensor heads you can create a complete gas detection system for combustible gases complying with SIL 2 standard. In larger installations signals of gas detectors often run into SIL certified process control systems, in smaller plants there is a need for a control module complying with SIL requirements. As any combination sensor head / control module forms a complete gas detection system, this system closes the gap. It is expandable without limits, and there is no restriction to the mix of sensor heads connected. Connecting other front ends The versatility of the Statox 502 does not end with gas detection. You can connect any front end providing a 4 – 20 mA analog signal or a Wheatstone bridge signal. So you can create your own compact control system for a variety of sensors with just one type control device. Accessories Useful accessories such as calibration adapters, intrinsically safe repeaters, Power supplies etc. complete the system. 205 VAC, 8 A min. make or break power >/= 12 V, 10 mA, contakte silver / nickel

Fixed gas detection system for oxygen, toxic and combustible gases This DIN – rail mounted modern control module saves space, money and installation time. One safe controller for all gases: Any combination of a sensor head plus control module is a complete gas detection system. This makes the Statox 501 so safe and reliable. The Statox 501 also gives you the opportunity to alter or expand existing systems with minimum cost and labor. Programs for all gases and measuring ranges are permanently stored in the memory of the controller. The user-friendly software program allows authorized personnel to select different configurations by a simple push of a button. Easy to install and easy to use The controll modules as well as the power supply and the common alarm module clip on to a DIN rail. The remote sensor heads and any alarm or recording devices connect to terminals on the front of the module. Each Statox 501 control module has three relays for alarm 1 and 2 and system failure (115 / 230 V AC / 2 A). An analog output for recorder or process control systems is also included. Measured values are displayed on a 4 digit LED-display. It is easy to program or calibrate the Statox 501! Just follow the menu! If intrinsically safe transmitters are to be installed in division 1 areas, they can be connected via intrinsically safe repeaters. 24 V power supply as well as the signals for the common alarm module are transmitted via bus from one module to the next. All terminals are easily accessible from the front. Field proven sensors for reliable gas detection Compur manufactures electrochemical sensors for the detection of oxygen deficiency and toxic gases. These sensors generate an electrical current proportional to the actual gas concentration. The remote sensor heads are designed as intrinsically safe certified 4 - 20 mA transmitters and have an integrated concentration display. Combustible gases can be detected with a variety of catalytic beads (pellistors) or infrared technology. The sensor heads are certified "Ex d" or "Ex de" and can be connected directly to the control module, even if they are to be used in classified areas. The control module can supply and operate different designs of catalytic sensors. With so many possibilities, the system can easily be tailored to suit your individual application needs. Easy maintenance saves time and money Maintenance of the 4 – 20 mA transmitters is very easy. A one-man calibration or replacement of the sensors can be done without further precautions, even in classified areas. Accessories A range of wall-mount cabinets for a maximum of 5, 8 or 32 controllers as well as a 19”-carrier, ensure an easy professional installation. -20 - +60 °C

It is equipped with an impact (hammer) type sensor with 45 mm long insulated needles (length of the penetrating part: 30 mm, diameter of the penetrating part: 3.5 mm). Model 140W differs from the similar model M141W in the lack of an infrared pyrometric sensor, which is used for non-contact measurement of wood temperature and allows for automatic temperature compensation during measurement. Instead, the M140W model requires manual adjustment of the wood temperature. Features of the Metrinco M140W wood moisture meter: wide measuring range: 4...140 % depending on the material group high accuracy of the device: 0,5 % total number of wood types: 192, grouped into three classes. English language interface high-quality ABS plastic case with a protective silicone (rubber) cover screen backlight

Automatic parallel online determination of (bio)methane potential is essential to ensure the effectivity of biogas production. Yieldmaster simplifies the search for the right substrae and guarantees maximums yields for your biogas process. Using Yieldmaster minimum gas flows are not necesseray. The Yieldmaster (BCS-CH4 biogas) consists of CH4 infrared gas sensors, precision volumeters and BAcVis or BlueVis software. It can be used from small vessels (500mL) up to big lab fermenters. Data is recorded consistently. Using date from the integrated temperature measurement BacVis or BlueVis calculate the standard volume automatically. Sensors measure directly in the fermenter which means no data is lost and errors caused by gas leakage etc. are minimized. The compensating reservoir device guarantees complete measurement under all circumstances. In combination with BlueVCount (Yieldmaster 2.0) simultaneous measurement of methane and gas volumes is feasable.

The robust, water-proof and impact-resistant construction in combination with easy readable display of Detective+ of Crowcon is a ideal device for portable gas detector For monitoring of a bigger area, up to 12 Detective+ can be connected, whereby in case of alarm of one device all devices will be activated! Easy detection of several gases (up to 4) and due to installation of infrared-sensors (optionally available) sampling of potential high-flammable gases and carbon dioxide is possible! Infrared-sensors are not affected in cases of poisoning of other sensors! Detective+ is based on the successful, worldwide over 55.000 devices sold “Triple Plus”- gas detector! Features of Detective+ Integrated pump (optional) offers rapid response and additional sensor protection Easy readable display Up to 60 hrs. battery operation Very bright red LED-groups provide optival alarm display Extremely loud acoustically alarm tone by emitting siren in all directions (104 dBA @ 1 meter) Sensors...