Results for
ELMACILAR OTOMOTIV
Turkey
Ø22 or Ø27 Complete set for reefer including hinges. Galvanized or Stainless Steel
Request for a quoteIGUS® GMBH
Germany
Guide trough for vertical applications, especially for storage and retrieval units of all kinds, now with even lighter components and simplified installation. Locking lever and guide rails prevent the energy chain from swaying or swinging outwards. - Significant savings in costs and weight when compared with a complete housing - Now for especially narrow aisles as well - This also means low transport costs - Fast, safe and easy assembly with clip-on guide rails - Reduced noise - Easy access for servicing - Energy, data and media are guided in one system safely and without interruption
Request for a quoteHS UMFORMTECHNIK GMBH
Germany
In contrast to DVK-6 quick closure pipe couplings, DVK-6 Fix pipe couplings only the upper area of the slit coupling is closed with a clamping lever. The clamping lever can be locked in any desired position by a simple upward pull. A high clamping force develops due to optimal length of lever. double secured massive aluminium clamps very easy to mount due to circular version white EPDM gasket (temperature-resistant from -30°C to +120°C), food-safe black natural rubber gasket (-20°C to +60°C)
Request for a quoteFERPLAST SNC
Italy
MANUAL LEVER SEALER WITH CONSTANT TEMPERATURE Thermosealing machine that works with sealing bars at a constant temperature for the closure of polypropylene bags and coupled/aluminum laminate, paper, barrier materials, etc. The sealing bars of the type "hot bar" are equipped with resistance and controller for controlling the temperature from 30 °C to 200 °C. The closing of the bars is through a quick manual lever that guarantees a high sealing pressure and allows the sealing of envelopes high thickness with or without side gusset. Attention: it is necessary to preheat for about 5 minutes. The sealer is available in two models: ME 300 CFH BZ with checkered knurled bars ME 300 CFH BL with longitudinally knurled bars
Request for a quoteNORELEM FRANCE
France
Thermoplastic. DIN 7984 screws and DIN 985 nuts steel. Version: Black. Screws and nuts electro zinc-plated. Note: The standard size for round tubes is Ø18 mm or Ø30 mm. Use reducer sleeves 29042 if smaller tubes are to be clamped or a conversion from round to square tubes is required. On request: Plastic levers for locking. Accessory: - Reducer sleeves 29042 - Round and square tubes 29050
Request for a quoteOKS SPEZIALSCHMIERSTOFFE GMBH
Germany
Loosening of rusted-on connections such as screws, nuts, levers, joints or locks Non-destructive disassembly of seized or rusted-in parts such as bolts, chain links, springs, valves or hinges Advantages and benefits High effectiveness thanks to gap penetration properties Minimizing of the effort required to loosen seized parts and restoring of mobility Good lubricating properties thanks to MoS₂ Loosened parts are protected against new corrosion forming Eliminates squeaking noises Displaces moisture
Request for a quoteHS UMFORMTECHNIK GMBH
Germany
DVK-HD® quick closure pipe couplings are ideal for a quick and safe mounting in pressure conveyors. The coupling is closed with two clamping levers, therefore a quick opening and closing of pipe connections is possible. The clamping lever can be locked in any desired position by a simple upward pull.
Request for a quoteFRANKE GMBH
Germany
Cassette with star grip - standard Cassette with star grip or clamping lever for locking at any position on the guide track. The clamping acts without force on the guide system. It is used for manually movable devices, clamping and holding stops, delivery of tools and processing parts. Please consult us for further information. Cassette with clamp lever Cassettes with clamping levers allow the cassettes to be locked in any position along the guideway. The clamping acts without force on the guide system. It is used for manually movable devices, clamping and holding stops, delivery of tools and processing parts. We would be happy to advise you on application and design.
Request for a quoteWEBER FOOD TECHNOLOGY GMBH
Germany
One for many purposes: Powerful skinning machine for large and small cuts of beef, veal, pork, turkey, horse and game. The Skinner AMS 533 offers an ideal cutting width for processing large cuts, such as beef topside. Advantages Powerful for the highest yield from the smallest installation area Product-specific optional transport rollers and speciallycoordinated blades provide the highest possible yield Ideal cutting width for powerful skinning of large and small cuts Blade guard in cleaning position Gear brake motor with quick stop Product-specific tension rollers Newly-developed compressed air transport roller cleaning,resulting in consistent skinning results Options: Body lever switch Quick release lock for tool-free blade changes Special rollers Skinning procedure protection Special tension rollers
Request for a quoteHS UMFORMTECHNIK GMBH
Germany
DVK 6 pipe couplings with quick closure accelerate mounting in suction conveying with constant safety. The clamping lever can be locked in any desired position by a simple upward pull. A high clamping force develops due to optimal length of lever Additionally DVK-6 pipe couplings with quick closure offer the following characteristics: double secured massive aluminium clamps screws M 8 with massive threaded bars very easy to mount due to circular version black natural rubber gasket (-20°C to +60°C) white EPDM gasket (temperature-resistant from -30°C to +120°C), food-safe optionally available with silicone gasket (temperature-resistant from -60°C to +200°C)
Request for a quoteFERPLAST SNC
Italy
Wrapping machine semi-automatic with turntable mod. FP BOX - TIRES, suitable to the winding of tires coupled with internal diameters from 300 mm to 500 mm. The rotation of the table is motorized, activated by the pedal and with adjustable speed; the movement of ascent / descent coil is manual with reel holder counterweighted. The machine is equipped with the compressed air device by drive via lever valve for centering and locking of the wheels, consisting of two jaws which are installed on the expansion of extractable pins. To lock and unlock the tires is sufficient to drive the valve lever. The group expansion is raised by about 150 mm. from the plane table.
Request for a quoteF.E.S. GMBH
Germany
Hinged belt filters, also known as folding belt filters, are used for cleaning contaminated coolant fluids in metal processing and rolling mill applications. Cleaned coolant fluids have longer service life, improve the surface quality of workpieces or rolled goods, and assist in heat dissipation at the processing or forming site. Advantages: High throughput capacity No backflushing required during regeneration Easy discharge of filter cake Short regeneration time Compatible with various plastic filter belts High and low-pressure flushing system Cost-effective Operation: The F.E.S. hinged belt filter incorporates a circulating plastic filter belt to meet the filtration requirements without disposal issues. A filter belt cleaning device is located below the filtrate discharge chamber. The opening and closing of the chambers are controlled by two pneumatic cylinders. The self-locking toggle lever mechanism keeps the chambers closed even in the event of a loss of compressed air.
Request for a quoteKRAUS GMBH GLASBESCHLÄGE
Austria
Square lock case in modern design For 24 mm fold depth Suitable for 8-10 mm glass
Request for a quoteKRAUS GMBH GLASBESCHLÄGE
Austria
Square lock case in modern design For 24 mm fold depth Suitable for 8-10 mm glass
Request for a quoteKRAUS GMBH GLASBESCHLÄGE
Austria
Square lock case in modern design For 24 mm fold depth Suitable for 8-10 mm glass
Request for a quoteKRAUS GMBH GLASBESCHLÄGE
Austria
Square lock case in modern design For 24 mm fold depth Suitable for 8-10 mm glass
Request for a quoteKRAUS GMBH GLASBESCHLÄGE
Austria
Square lock case in modern design For 24 mm fold depth Suitable for 8-10 mm glass
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
KRAUS GMBH GLASBESCHLÄGE
Austria
Classic lock case
Request for a quoteKRAUS GMBH GLASBESCHLÄGE
Austria
Prepared for profile cylinder
Request for a quoteKRAUS GMBH GLASBESCHLÄGE
Austria
Prepared for profile cylinder
Request for a quoteKNITTER-SWITCH ELEKTROTECHNISCHE ERZEUGNISSE KNITTER & CO.KG
Germany
MTL with locking lever
Request for a quoteBETONBAU GMBH UND CO. KG
Germany
"No safety door without a suitable lock... This is the principle underlying our production of variable lock systems which meet the high requirements of pertinent norms. Special security functions ensure the correct locking of the station and prevent the operating personnel being unintentionally locked in. Designs: Rim dead lock Mortise station lock Mortise switchgear house lock Mortise compact station lock Swivel lever lock Latch lock Options: lock variants on right and left Lock with KABA perforation (Switzerland) Panic bar One or two profile cylinders Bolt contacts for lock monitoring and magnet contact Stainless steel security escutcheon
Request for a quoteBETONBAU GMBH UND CO. KG
Germany
"No safety door without a suitable lock... This is the principle underlying our production of variable lock systems which meet the high requirements of pertinent norms. Special security functions ensure the correct locking of the station and prevent the operating personnel being unintentionally locked in. Designs: Rim dead lock Mortise station lock Mortise switchgear house lock Mortise compact station lock Swivel lever lock Latch lock Options: lock variants on right and left Lock with KABA perforation (Switzerland) Panic bar One or two profile cylinders Bolt contacts for lock monitoring and magnet contact Stainless steel security escutcheon
Request for a quoteNITTO KOHKI EUROPE GMBH
Germany
Light lever pulldown will connect the plug and socket without fail ready to flow liquid or gases. This Cupla complies with diversified applications in liquid or gas transportation. Endface seal structure enables no bumps or hollows on the internal fluid passage, and ensures smooth fluid transportation. “Special lip seal” adopted (except 3/4”, 1” sizes and silicon rubber seal) for light lever action and tight and sure sealing when connected. Connection part dimensions comply with US military specifications MILAA59326. The variety of body materials, sizes and end configurations has been standardized to comply with wide range of applications. Additional stopper function design will enhance safety (madetoorder product).
Request for a quoteNITTO KOHKI EUROPE GMBH
Germany
Highly Maneuverable Tool Compact and lightweight design for working in confined spaces. Locking throttle lever helps prevent accidental startup.
Request for a quoteEISELE GMBH
Germany
- One interface for compressed air, gases, fluids, vacuum, electrical and electronic signals - Maximum modularity due to freely configurable connections - Integrated coding in the housings prevents incorrect connections - Easy, tool-free mounting and dismounting - Locking lever reduces the force needed for assembly - Machine set-up times are reduced - Fits to Eisele adaptive inserts - Coupling and slotted nut material: Chemical nickel-plated aluminum - Lever materials: anodized aluminum / 1.4301 (304) stainless steel - Other materials: 1.4404 (316L) stainless steel / A2 / POM - Knurled screw with retaining cable
Request for a quoteFATH GMBH
Germany
oints, for the movable connection of two profiles or panel elements, with or without locating pins; various models/versions: — with/without adjustable friction — with/without locking lever Model-dependent functions : — by tightening or loosening the screws you can seamlessly regulate the functionality of the joint or you can fix it in one position — by tightening or loosening the screws and the locking lever you can seamlessly regulate the functionality of the joint or you can fix it in one position different sizes: — Profile: 20, 30, 40, 45 — profile: 25/1"; 28/1.1"; 38/1.5" — Profile slot 5; 6; 8; 10 Material: — Die-cast aluminium — Zinc die-cast other joints: see friction joint
Request for a quoteFATH GMBH
Germany
Combi Hinge to hinge panels or aluminum profiles diferent Models, Materials, Sufaces, Colors combinable hinge wings: 20, 25, 30, 35, 40, 45, 50, 60 Material: Plastic PA, glass fiber reinforced, electrostatical discharging, Stainless Model: detachable, non-detachable, with/without locking lever, electrostatical discharging, centerings bolts (optional), stainless steel axis Surface: laquered, Matt nickel plated and chromated Color: black, grey, aluminum colored, further colors on request Fastening: using countersunk screws
Request for a quoteFATH GMBH
Germany
Adjustabele Hinges friktion & positioning function (Set), holds doors and flaps open at an angle or keeps them securely closed Various types: — angle of 85° or 175 — at any angle — continuously variable, 0-5 Nm hinge moment (also supports lieghtweight horizontal dorrs) — Set with cover caps Material selection: — Plastic PA glass fibre reinforced — zinc die-cast —Axle: Steinless steel extras: electrostatically discharging, other sizes, other colors on request Alternative: see "Combi Hinges" with locking lever ; available in plastic PA glass-fibre reinforced or zinc die-cast Translated with www.DeepL.com/Translator (free version)
Request for a quoteResults for
Lever locks - Import exportNumber of results
35 ProductsCategory