Results for
ENVEA
France
Radar sensor for measuring the level in silos and containers. Available for silos up to 120 m height. Can be used for a wide variety of materials, regardless of the size or composition of the material. • 80 GHz allround sensor • continuous measurement • maintenancefree operation through noncontact measuring principles • reliable measurement independent of vapour, dust and noise
Request for a quoteBDSENSORS GMBH
Germany
The plastic submersible probe LMK 809 is designed for continous level measurement in waste water or in most of aggressive media. Basic element is a capacitiv ceramic sensor. Basic element of the plastic probe is the flush mounted ceramic sensor, which makes cleaning easier when solid parts of the medium deposit on it. Different cable and seal materials are available in order to achieve maximum media compatibility. Features: — nominal pressure: 0 ... 40 cmH2O up to 0 ... 100 mH2O — accuracy: 0.35 % (opt. 0.25 %) FSO — diameter 45 mm — chemical resistance — high overpressure capability — pure ceramic sensor — especially for tank level measurement of viscous and aggressive media — housing material PP-HT or PVDF — diaphragm ceramics Al2O3 (99.9 %) Optional Features: — different kinds of cable and seal materials — prepared for mounting with pipe
Request for a quoteBDSENSORS GMBH
Germany
The stainless steel probe LMK 382 has been designed for continous level measurement in waste water, waste and higher viscosity media. Basic element is a robust and high overpressure capable capacitive ceramic sensor e.g. for low levels easily. Features: — nominal pressure: 0 ... 40 cmH2O up to 0 ... 200 mH2O — accuracy: 0.35 % (opt. 0.25 %) FSO — diameter 39.5 mm — especially for sewage, viscous and pasty media Optional Features: — IS-version Ex ia = intrinsically safe for gas and dust — mounting with stainless steel pipe — flange version — diaphragm pure ceramic (99.9 % AI2O3) — different kinds of cables — different kinds of elastomers
Request for a quoteBDSENSORS GMBH
Germany
The separable stainless steel probe LMK 358 has been designed for level measurement in waste water, waste and higher viscosity media. Basic element is a capacitive ceramic sensor. In order to facilitate stock-keeping and maintenance the transmitter head is plugged to the cable assembly with a connector and can be changed easily. Features: — nominal pressure: 0 ... 40 cmH2O up to 0 ... 100 mH2O — accuracy: 0.35 % (opt. 0.25 %) FSO — diameter 39.5 mm — cable and sensor section separable — especially for sewage, viscous and pasty media Optional Features: — IS-protection Ex ia = intrinsically safe for gas and dust — cable protection via corrugated pipe — diaphragm pure ceramic (99.9 % AI2O3) — different kinds of cable — different kinds of elastomeres
Request for a quoteBDSENSORS GMBH
Germany
The separable plastic probe is designed for level measurement of water, waste water as well as fuels and oils. Basic element is a piezoresistive stainless steel sensor. Since the area of application is often outside a building, great emphasis was placed on overvoltage / lightning protection. In order to facilitate stock-keeping and maintenance the transmitter head is plugged to the cable assembl with a connector and can be changed easily. Features: — nominal pressure: 0 ... 1 mH2O up to 0 ... 100 mH2O — accuracy: 0,35 % (opt. 0,25 %) FSO — diameter 35 mm — cable and sensor section separable — small thermal effect — integrated lightning protection and increased overvoltage protection; 8 kA gas discharge tube (8/20 μsec); 4 kV surge l-l/l-e according to EN61000-4-5 Optional Features: — SIL 2 (safety integrity level) according to IEC 61508 / 61511 — different cable and elastomeres — customer specific versions
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
BDSENSORS GMBH
Germany
The slimline probe LMK 306 with ceramic sensor has been especially designed for the continuous level measurement at confined space conditions. Permissible media are clean or slightly contaminated water and thin fluids. Different cable sheath materials are available in order to achieve maximum media compatibility. Features: — nominal pressure: 0 ... 6 mH2O up to 0 ... 200 mH2O — accuracy: 0.5 % FSO — diameter 17 mm — excellent long term stability — suitable for hydrostatic level measurement e.g. 3/4" pipes — excellent linearity Optional Features: — different cable materials — customer specific versions e.g. special pressure ranges Preferred areas of use: — level measurement at confined space conditions — ground water monitoring — depth or level measurement in wells — drinking water abstraction — level measurement in open and closed tanks
Request for a quoteBDSENSORS GMBH
Germany
The level transmitter LMK 307 is designed for continuous level measurement in water or waste water applications. Basic element is a flush mounted ceramic sensor. Suitable for all fluids which are compatible with media wetted materials. Different cable and elastomer matierals can be offered according to the customer-specific operating conditions. Features: — nominal pressure: 0 ... 4 mH2O up to 0 ... 250 mH2O — accuracy: 0.5 % FSO — diameter 27 mm — excellent linearity — excellent accuracy — easy handling Optional Features: — IS-version — SIL 2 (safety integrity level) according to IEC 61508 / IEC 61511 — different kinds of cables and elastomeres — customer specific versions e.g. special pressure ranges
Request for a quoteBDSENSORS GMBH
Germany
LMP 307T for continuous level and temperature measurement . Advantage: simultaneous recording of level and temperature with separate independent signal amplification. In addition to classical signal processing of the level, an additional signal circuit independent of the level which converts the temperature signal into a 4 … 20 mA analogue signal in 2-wire technology is provided. For drinking water purification, monitoring of rainwater overflow basins and river courses, in addition to level measurement in containers or tank batteries. Features: — nominal pressure: 0 ... 1 mH2O up to 0 ... 250 mH2O — accuracy: 0,35 % (opt. 0,25 %) FSO — diameter 26,5 mm — separate output signals for pressure and temperture ranges — easy handling — low maintenance and wiring costs Optional Features: — drinking water certificate acc. to DVGW and KTW — different kinds of cables and elastomers — customer specific versions
Request for a quoteBDSENSORS GMBH
Germany
The stainless steel probe LMK 382H has been designed for continous level measurement in waste water, waste and higher viscosity mediums. Basic element is a robust and high overpressure capable capacitive ceramic sensor e.g. for low levels. Features: — nominal pressure range 0 ... 60 cmH2O up to 0 ... 200 mH2O — accuracy: 0.1 % FSO — diameter 39.5 mm — HART®-communication (setting of offset, span and damping) — permissible temperatures up to 85 °C — high overpressure capability — high long term stability Optional Features: — IS-version Ex ia = intrinsically safe for gas and dust — mounting with stainless steel pipe — flange version — diaphragm pure ceramic (99.9 % AI2O3) — accessoires e.g. assembling and probe flange, mounting clamp
Request for a quoteBDSENSORS GMBH
Germany
The LMP 308i is designed for continuous fill level and level measurement of water and liquid mediums. The signal processing of sensor signal is done by digital electronics with 16-bit analog digital converter. Consequently it is possible to conduct an active compensation of sensor intrinsic deviations from normal condions like nonlinearity and thermal error. In order to facilitate stock-keeping and maintenance the transmitter body is plugged to the cable assembly with a connector and can be changed easily. Features: — nominal pressure: 0 ...4 mH2O up to 0...200 mH2O — accuracy: 0.1 % FSO — diameter 35 mm — cable and sensor section separable — thermal error in compensated range -20...70°C: 0.2 FSO TC 0.02% FSO/10K 0,02 % FSO / 10K — high accuracy — communication connection — turn-down 1:10 Optional Features: — IS-version — mounting accessories as cable gland and terminal clamp in stainless steel
Request for a quoteBDSENSORS GMBH
Germany
BD\SENSORS has developed the LMK 307T for continuous level and temperature measurement in water or waste water applications. The advantage: simultaneous recording of level and temperature with separate independent signal amplification. The maintenance and wiring costs are considerably reduced. In addition to classical signal processing of the level, an additional signal circuit independent of the level which converts the temperature signal into a 4 ... 20 mA analogue signal in 2-wire technology is provided. Features: — nominal pressure: from 0 ... 4 mH2O up to 0 ... 250 mH2O — nominal temperature from 0 ... 30 °C up to 0 ... 70 °C — accuracy: 0.5 % FSO — diameter 27 mm — separate output signals for pressure and temperture ranges — excellent accuracy — easy handling — low maintenance and wiring costs Optional Features: — different kinds of cables — different kinds of seal materials — customer specific versions
Request for a quoteSARTEX S.R.L.
Italy
Rectangular level with 3 vials. Made of painted reinforced aluminium. Extremities made of shockproof material.
Request for a quoteUWT UK LTD
United Kingdom
The capacitive point level sensor Capanivo® CN 4020 is used in storage and process vessels as a full, demand, and empty detector in all bulk solids from a DK value of 1.6. The probe made of glass fiber reinforced PPS plastic is FDA compliant and also suitable to be used in food. Due to its "Active Shield" function any buildup does not in any way affect the accuracy of the measurement results of the sensor. Your benefit: - Very cost-effective level limit switch in bulk solids - Simple, reliable and maintenance-free multi-talent in bulk solids - Plug and play level limit switch without calibration
Request for a quoteResults for
Levelling staffs for measurement - Import exportNumber of results
14 ProductsCountries
Company type