Lens mounting - Import export

The Focovision by Transmission SPF-3 is used in optical laboratories where the lenses are mounted into frames. It is connected to the computer network, from which it receives the nominal values of the prescription lens. Its main advantages are repeatability, accuracy, and easy calibration. It measures the lens optical power by using a light beam perpendicular to the concave lens surface at a certain wavelength (546 nm or 587 nm) and by measuring in all directions (360 degrees). In addition, it is equipped with a frame positioning device and has a user friendly interface; permitting an operator to learn how to perform the complete lens control of the mounted lenses with little training required. Positioning assistance: The FOCOVISION display provides assistance to the operator to help them position the frame and lens to be measured properly, creating a user friendly and fast process. The positioning target, displayed at every step of the procedure, and operator instructions projected

he xiB-64 camera series with 64 Gbit/s is the host for the fastest image sensors out there. It features lower resolution high-speed sensors (2 Mpix at 2500 Fps) all the way to ultra high-res sensors with unmatched framerates (65 Mpix at 72 Fps). All models can be equipped with an active lens mount and long fiber optical cables.

The C500 Mark II camera comes standard with a 5.9K full-frame CMOS sensor with over 15 stops of dynamic range. Its built-in DIGIC DV 7 Image Processor increases functionality and flexibility to enable features such as 5.9K recording, internal Canon Cinema Raw Light recording and Dual Pixel Autofocus. Canon C500 Mark II allows us to enjoy optional interchangeable lens mounts so that we can adapt them to our requirements according to the project we carry out. The EF lens mount is compatible with many Canon EF lenses, such as EF cine primes, while the optional PL mount can be used with the Cooke/i system. In addition, we can also use the B4 mount adapters with B4 optics. This camera can also record at high speed as it supports up to 60 frames per second at 5.9K.

Radar (FMCW) level transmitter for liquids with hygienic requirements The OPTIWAVE 3500 is a 2-wire 80 GHz radar (FMCW) level transmitter for liquids in hygienic applications. It is designed for continuous, non-contact level measurement in the food and beverage as well as pharmaceutical industry. The device features a flush-mounted PEEK Lens antenna with a small beam angle and dead zone for precise measurement even in small and narrow tanks with agitators. It is equally suited for use on larger tanks up to measuring distances of 50 m / 164 ft. As the radar withstands process temperatures up to +150°C \ +302°F and pressures up to 25 barg / 362 psig, it can be used in CIP/SIP cleaning procedures. The OPTIWAVE 3500 offers a large choice of hygienic process connections. It comes with extensive device diagnostics as well as HART®7 communication.

Radar (FMCW) level transmitter for powders and dusty atmospheres The OPTIWAVE 6500 is a 2-wire 80 GHz radar (FMCW) level transmitter for demanding applications with powders in very dusty atmospheres. With its small beam angle, this radar is particularly suited for continuous, non-contact level measurement in high and narrow silos, hoppers or buffer storage containers up to 100 m / 328 ft. Due to the high signal dynamics of the FMCW radar, the level transmitter is ideal for low-reflective media, dust, uneven surfaces or tanks with obstacles. As it features a flush-mounted PEEK Lens antenna, there is no intrusion of the antenna into the tank.

Description Manufacturer CML Technologies GmbH & Co. KG Optical features Indicator type standard Electrical features Voltage type AC Voltage tolerance 10 % Rectifier Half wave Pin assignment Brass terminal = anode, tinned terminal = cathode Mechanical features Number of LEDs 1 Lens typ Flat Lens size 16 mm Lens surface diffused Mounting type With bezel Bezel typ Superflat bezel Screw thread size M22 Bezel material plastic Bezel color black Material plastic Makrolon 2805 Connector type Tab terminals 2,8mm x 0,8mm Number of Connectors 3 IP Code IP67 Max. panel thickness 8,5 mm Thermal features Operating temperature -25...+60 °C Storage temperature -25...+60 °C Norms & Standards UL listed Yes VDE certified Yes Miscellaneous Connectors for lamp test No

Description Manufacturer CML Technologies GmbH & Co. KG Optical features Indicator type standard Electrical features Voltage type AC Voltage tolerance 10 % Rectifier Half wave Pin assignment Brass terminal = anode, tinned terminal = cathode Mechanical features Number of LEDs 1 Lens typ Flat Lens size 16 mm Lens surface diffused Mounting type With bezel Bezel typ Superflat bezel Screw thread size M22 Bezel material Metal Material plastic Makrolon 2805 Connector type Tab terminals 2,8mm x 0,8mm Number of Connectors 3 IP Code IP67 Max. panel thickness 8,5 mm Thermal features Operating temperature -25...+60 °C Storage temperature -25...+60 °C Norms & Standards UL listed Yes VDE certified Yes Miscellaneous Connectors for lamp test No

Description Manufacturer CML Technologies GmbH & Co. KG Optical features Indicator type standard Electrical features Voltage type AC/DC Voltage tolerance 10 % Rectifier Bridge Pin assignment Brass terminal = anode, tinned terminal = cathode Mechanical features Number of LEDs 1 Number of Chips 1 Lens typ Flat Lens size 16 mm Lens surface diffused Mounting type With bezel Bezel typ Superflat bezel Screw thread size M22 Bezel material plastic Bezel color black Material plastic Makrolon 2805 Connector type Tab terminals 2,8mm x 0,8mm Number of Connectors 3 IP Code IP67 Max. panel thickness 8,5 mm Thermal features Operating temperature -25...+60 °C Storage temperature -25...+60 °C Norms & Standards UL listed Yes VDE certified No Miscellaneous Connectors for lamp test No

Description Manufacturer CML Technologies GmbH & Co. KG Optical features Indicator type standard Electrical features Voltage type AC/DC Voltage tolerance 10 % Rectifier Bridge Pin assignment Brass terminal = anode, tinned terminal = cathode Mechanical features Number of LEDs 1 Number of Chips 1 Lens typ Flat Lens size 16 mm Lens surface diffused Mounting type With bezel Bezel typ Superflat bezel Screw thread size M22 Bezel material Metal Material plastic Makrolon 2805 Connector type Tab terminals 2,8mm x 0,8mm Number of Connectors 3 IP Code IP67 Max. panel thickness 8,5 mm Thermal features Operating temperature -25...+60 °C Storage temperature -25...+60 °C Norms & Standards UL listed Yes VDE certified No Miscellaneous Connectors for lamp test No

Description Manufacturer CML Technologies GmbH & Co. KG Optical features Indicator type standard Electrical features Voltage type AC Voltage tolerance 10 % Rectifier Half wave Pin assignment Brass terminal = anode, tinned terminal = cathode Mechanical features Number of LEDs 1 Lens typ round Lens size 16 mm Lens surface diffused Mounting type With bezel Bezel typ Prominent bezel Screw thread size M22 Bezel material plastic Bezel color black Material plastic Makrolon 2805 Connector type Tab terminals 2,8mm x 0,8mm Number of Connectors 3 IP Code IP67 Max. panel thickness 8,5 mm Thermal features Operating temperature -25...+60 °C Storage temperature -25...+60 °C Norms & Standards UL listed Yes VDE certified Yes Miscellaneous Connectors for lamp test No

Description Manufacturer CML Technologies GmbH & Co. KG Optical features Indicator type standard Electrical features Voltage type AC Voltage tolerance 10 % Rectifier Half wave Pin assignment Brass terminal = anode, tinned terminal = cathode Mechanical features Number of LEDs 1 Lens typ round Lens size 16 mm Lens surface diffused Mounting type With bezel Bezel typ Prominent bezel Screw thread size M22 Bezel material Metal Material plastic Makrolon 2805 Connector type Tab terminals 2,8mm x 0,8mm Number of Connectors 3 IP Code IP67 Max. panel thickness 8,5 mm Thermal features Operating temperature -25...+60 °C Storage temperature -25...+60 °C Norms & Standards UL listed Yes VDE certified Yes Miscellaneous Connectors for lamp test No

Description Manufacturer CML Technologies GmbH & Co. KG Optical features Indicator type standard Electrical features Voltage type AC/DC Voltage tolerance 10 % Rectifier Bridge Pin assignment Brass terminal = anode, tinned terminal = cathode Mechanical features Number of LEDs 1 Number of Chips 1 Lens typ round Lens size 16 mm Lens surface diffused Mounting type With bezel Bezel typ Prominent bezel Screw thread size M22 Bezel material plastic Bezel color black Material plastic Makrolon 2805 Connector type Tab terminals 2,8mm x 0,8mm Number of Connectors 3 IP Code IP67 Max. panel thickness 8,5 mm Thermal features Operating temperature -25...+60 °C Storage temperature -25...+60 °C Norms & Standards UL listed Yes VDE certified No Miscellaneous Connectors for lamp test No

Description Manufacturer CML Technologies GmbH & Co. KG Optical features Indicator type standard Electrical features Voltage type AC/DC Voltage tolerance 10 % Rectifier Bridge Pin assignment Brass terminal = anode, tinned terminal = cathode Mechanical features Number of LEDs 1 Number of Chips 1 Lens typ round Lens size 16 mm Lens surface diffused Mounting type With bezel Bezel typ Prominent bezel Screw thread size M22 Bezel material Metal Material plastic Makrolon 2805 Connector type Tab terminals 2,8mm x 0,8mm Number of Connectors 3 IP Code IP67 Max. panel thickness 8,5 mm Thermal features Operating temperature -25...+60 °C Storage temperature -25...+60 °C Norms & Standards UL listed Yes VDE certified No Miscellaneous Connectors for lamp test No

Description Manufacturer CML Technologies GmbH & Co. KG Electrical features Voltage type AC Voltage tolerance 10 % Rectifier Half wave Pin assignment Brass terminal = anode, tinned terminal = cathode Mechanical features Number of LEDs 1 Lens typ Flat Lens size 10 mm Mounting type With bezel Bezel typ Superflat bezel Screw thread size M19 Bezel material Metal Material plastic Makrolon 2805 Connector type Tab terminals 2,8mm x 0,8mm Number of Connectors 2 IP Code IP67 Max. panel thickness 11 mm Thermal features Operating temperature -25...+60 °C Storage temperature -25...+60 °C Norms & Standards UL listed Yes VDE certified No Miscellaneous Connectors for lamp test No

Description Manufacturer CML Technologies GmbH & Co. KG Electrical features Voltage type AC/DC Voltage tolerance 10 % Rectifier Half wave Pin assignment Brass terminal = anode, tinned terminal = cathode Mechanical features Number of LEDs 1 Number of Chips 1 Lens typ Flat Lens size 10 mm Mounting type With bezel Bezel typ Superflat bezel Screw thread size M19 Bezel material Metal Material plastic Makrolon 2805 Connector type Tab terminals 2,8mm x 0,8mm Number of Connectors 2 IP Code IP67 Max. panel thickness 11 mm Thermal features Operating temperature -25...+60 °C Storage temperature -25...+60 °C Norms & Standards UL listed Yes VDE certified No Miscellaneous Connectors for lamp test No

Description Manufacturer CML Technologies GmbH & Co. KG Electrical features Voltage type AC Voltage tolerance 10 % Rectifier Half wave Pin assignment Brass terminal = anode, tinned terminal = cathode Mechanical features Number of LEDs 1 Lens typ round Lens size 10 mm Mounting type With bezel Bezel typ Prominent bezel Screw thread size M19 Bezel material Metal Material plastic Makrolon 2805 Connector type Tab terminals 2,8mm x 0,8mm Number of Connectors 2 IP Code IP67 Max. panel thickness 11 mm Thermal features Operating temperature -25...+60 °C Storage temperature -25...+60 °C Norms & Standards UL listed Yes VDE certified No Miscellaneous Connectors for lamp test No

Description Manufacturer CML Technologies GmbH & Co. KG Electrical features Voltage type AC/DC Voltage tolerance 10 % Rectifier Half wave Pin assignment Brass terminal = anode, tinned terminal = cathode Mechanical features Number of LEDs 1 Number of Chips 1 Lens typ round Lens size 10 mm Mounting type With bezel Bezel typ Prominent bezel Screw thread size M19 Bezel material Metal Material plastic Makrolon 2805 Connector type Tab terminals 2,8mm x 0,8mm Number of Connectors 2 IP Code IP67 Max. panel thickness 11 mm Thermal features Operating temperature -25...+60 °C Storage temperature -25...+60 °C Norms & Standards UL listed Yes VDE certified No Miscellaneous Connectors for lamp test No