Lead cable - Import export

Complete ready to install heating mats, with or without spare heating cable, consisting of heating cable, cold lead and temperature sensors. Concrete floor heatings from Klöpper Therm are the optimum protection against dangers from black ice in cold stores. Concrete brings heat from outside into the cooling chamber. Thereby the temperature of the concrete along the heat flow falls to the temperature of the cooling chamber. The moisture stored in the warmer air condenses on the cold concrete surface through which black ice can form. Dangers through the exchange of warmer and colder air arise particularly in the area of locks. When, through repeated opening of the doors, condensation from the walls and ceilings falls on the floor and black ice forms, it can lead to accidents. In consequence of the effects of permanent cold, doors can freeze solid at the seals and be severely damaged.

Complete ready to install heating mats, with or without spare heating cable, consisting of heating cable and cold lead, length to customer specification, up to 180 m possible. Heating mats from Klöpper Therm work against the penetration of cold in to the ground and prevent upheaval of the ground and destruction of the foundations. Cold stores and cooling chambers give off cold to their environments. In the area of partly or fully sunk in the ground supports, foundations and floors the underlying soil receives the cold. If the natural heat flow from the environment and the earth is insufficient, the moisture in the ground freezes, expands and the ground is lifted. Depending on the nature of the ground, this may cause substantial damage to buildings. Frost heave protection in cold stores and cooling chambers is, therefore, an essential and a reliable preventative measure against frost damage and damp.

Frame polyamide PA66 GF25 V-0. Elastomer plate EPDM, ozone resistant acc. to DIN 53509, Stage 0 (best stage). Seal TPE TPV. Version: Black. Note: The cable gland plates are suitable for leading through cables without plugs (non-assembled lines). Cables, wires, hoses, pneumatic and hydraulic lines can be routed through. The lines can be inserted without piercing. The elastomer plate adapts to the cables and provides optimum sealing and strain relief. Unused ducts remain securely closed and sealed. Available with different glands or as a blind plate. Rating IP66. Certificates / standards met: UL 514B UL / CSA-File E140310

Lumens per Watt: 120 lm/W CRI: > 80 Beam Angle: 110 ̊ IP Rating: IP65 PF = 0.9 Die-Cast Aluminium Body Glass Diffuser Lead Cable: 50cm Lamp Life: 50,000 Hrs

LumiLife are one of the leading names in LED trade lighting, offering a range of products including LED panels, tube lights, floodlights and downlights that are designed to provide long-lasting illumination while helping customers save on energy costs. For indivudual product details please see below the product description which includes a downloadable product data sheet. 200W / 120 Lumens per Watt 24,000 Lumen 5,000K (Cool White) CRI > 80 110 Degree Beam Angle IP65 240 x SMD2835 LED Chips PF = 0.9 Die-Cast Aluminium Body Glass Diffuser Lead Cable: 50cm 50,000 Hour Lifespan (W) 347 x (H) 408 x (D) 60mm Quick Mount Bracket - This floodlight has a mounting bracket with a 20 degree angled edge that can be mounted straight out of the pack.

The PERFECT cable gland made of lead-free brass is the perfect cable entry solution for many industrial applications. Features: — in compliance with RoHS — integrated anchorage for cables — protection against twisting — wide sealing and clamping range — for cables from 3 to 48 mm — easy-to-install — temperature range -20 °C / +100 °C (dynamic) -40 °C (static, short term) — protection grade IP68 - 5 bar / IP69 — test certificates VDE / UL / DNV in preparation — many variations and accessories available

The PERFECT EMC-cable gland made of lead-free brass is the perfect cable entry solution for shielded cables to ensure trouble-free operation of electrical devices and systems. Features: — in compliance with RoHS — quick and easy EMC Connection — integrated anchorage for cables — wide sealing and clamping range — for cables from 3 to 48 mm — temperature range -20 °C / +100 °C (dynamic) -40 °C (static, short term) — Protection grade IP68 - 5 bar — Test standard UL 514B

With just one touch of a button all kinds of materials are easily transported along the façade, without that tiresome cable spaghetti, leading to faster, smoother construction. The GEDA BatteryLadderLIFT is THE new kid on the block in compact material hoists. Assembled in a flash by only one person in less than five minutes, the new lift from GEDA uses its powerful 24 V/10 Ah li-ion-battery and different load carrying devices to drive to transport all kinds of materials up to 120 kg. So with just one touch of a button the practical remote radio control sets the compact device in motion from 0 to 15 m/min. Whether the project is a restoration or a new build site, whether for tilers, decorators, window producers, joiners, removal companies, DIY enthusiasts and and and… the GEDA BatteryLadderLIFT is the ideal transportation tool for all those materials that have to be transported upwards quickly and safely. It can be used in virtually every situation.

*Lightweight Compact StructureEasy-to-Read OLED Display *Monitoring ECG, Respiration, SpO2, PR Parameters *3 or 5 Lead ECG Cable *Different Display Mode Options *64 units can be connected to the system at the same time *Nurse Call and Patient Call Functions *Connect to Central System with WiFi *Recording 240 Hours of Trends and 720 Hours of Alarm History for Each Patient

Test Lead from Mueller Cables Connection End 1 Stackable Banana Connection End 2 Stackable Banana Wire Gauge (AWG) 18 Amps 20 Wire Insulation Material Silicone Rohs Compliant YES, Exemption 6c

PVC/HT, Nomex ®, Silicone BETAtherm ®145 halogenfree, BETAtherm ®155 Fluoropolymers (ETFE, FEP, PTFE, PFA, ECC Perfluorpolymer) PEEK ™, Kapton ®

Robust case either in seawater resistant aluminum or in stainless steel - shaft in stainless steel - rotating components with permanent magnet in front chamber - electronic circuit with ASiC and Hall elements and interface components fitted within main chamber, separated from rotating components by a metallic wall - optional potting against water jets (IP 69K) - electrical connections via cable leads with inspection plug.

Robust case either in seawater resistant aluminum or in stainless steel - shaft in stainless steel - rotating components with permanent magnet in front chamber - electronic circuit with ASiC and Hall elements and interface components fitted within main chamber, separated from rotating components by a metallic wall - optional potting against water jets (IP 69K) - electrical connections via cable leads with inspection plug.

Robust case either in seawater resistant aluminum or in stainless steel - shaft in stainless steel - rotating components with permanent magnet in front chamber - electronic circuit with ASiC and Hall elements and interface components fitted within main chamber, separated from rotating components by a metallic wall - optional potting against water jets (IP 69K) - electrical connections via cable leads with inspection plug.

Robust case either in seawater resistant aluminum or in stainless steel - shaft in stainless steel - rotating components with permanent magnet in front chamber - electronic circuit with ASiC and Hall elements and interface components fitted within main chamber, separated from rotating components by a metallic wall - integrated absolute multiturn gearbox for the acquisition of revolutions - optional potting against water jets (IP 69K) - electrical connections via cable leads with inspection plug.

Accessories Professional users

We produce High Quality Lead Sheets in our High Purity Ingots, Casting and Cold Rolling Line. Purity Rate is Minimum: %99.991-%99.998 Lead Sheets are Used in Many Areas From Exterior Cladding in Buildings to Cable Manufacturing. The Lead Plates we produce are produced in High Purity and in accordance with the Radiation Insulation and Safety Regulations. It is Accepted in International Standards as the Most Ideal Armoring Material to be Used as an Armoring Material Against Lead Radiation. Due to the fact that a large part of our production is exported, our products are produced in European Standards (CE) Annual Standard Controls Are Made Periodically, Our Documents Are Renewed Every Year.

The Cleco® NeoTek™ fastening system is the next generation of smart tool solutions. The NeoTek 30 and 50 series tools have angle heads that were engineered to provide 1 million cycles maintenance-free, while delivering classleading repeatability of 2.0 Cm/Cmk at +/- 7%. NeoTek’s tool cable features an industryfirst quarter turn twist-lock design, thus eliminating one of the leading causes of tool cable failure: damaged threads. Cleco Neotek Right Angles are available from 1.3 to 350 NM, Pistols from 0.9 to 123 Nm and Inline from 0.9 to 850 Nm. - lightweight, ergonomic design - fully programmable features - high-output LED light rings - audible alerts - handle vibration - twist-lock design of the tool cable connector eliminates damaged threads - dual-analog and digital controller that supports legacy models - significant decrease of cable diameter and weight reduce by 50%

Trace Heating Experts Trace heating cables provide freeze protection and temperature maintenance (or heating) to pipes – commonly referred to as electric heat tracing, surface heating or heating tapes the cables are used to protect mechanical services (pipes, vessels, tanks, hoppers, valves, drums) against cold weather damage by sub-zero temperatures and frost conditions. Thorne & Derrick International are the UK’s largest stockist and supplier of Trace Heating Systems & Heat Tracing Cables for commercial, industrial and hazardous area heating of pipework, tanks, drums and vessels in both safe, non-hazardous and hazardous area locations. Since 1985 we have been providing expert technical support, competitive prices and an international delivery service for leading manufacturers of heat trace cables including Chromalox, EasyHeat, Eltherm, Nelson and Thermon.

The Wrights 1W-110 Wet Compact cable granulator and separation system is a brilliant machine for turning your scrap cable into cash and retrieves 99.9% copper from all your scrap cable. The water in the wet systems help separate your fine cables cleaner than in the dry systems i.e. data cables, TV/Toaster/Kettle’s and other power cable’s/leads, car looms, are separated easier and your end product is very clean copper granules and clean plastic granules with very little or no waste. The machine is operated by a single person. This granulation system is a fantastic piece of equipment and they come with a lot of extras included in the price i.e. different granulator screens for doing large cables or fine data cables and also an extra full set of granulation blades which not many granulation plants will give you and depending on the type of system, screens and new blades can be quite costly. - Length: 1780mm - Width: 1200mm - Height: 1800mm - Machine weight: 750kg Approximately - 6.7kW

When installed properly, BEULCO wall ducts guarantee reliable sealing between the supply and disposal lines and the wall duct. The wall ducts are sealed against water, oppressive groundwater and stray gas.

Politubes is specialized in the manufacturing of insulating tubes and end caps strictly customized for electromechanical and automotive world & performance release liners for tire producers. Our insulating tubes and caps are widely used in the manufacture of electric motors, cable harness, motor lead termination, compressors and transformers as well as in transistors, capacitors, heating element and batteries. They are also used to fix and protect permanent magnets for BLDC brushless motors. Our performance films with a high technological content guarantee particular mechanical resistance and release qualities and they are used as release liners for the tire production by the world leader producers. We holds main quality certifications as UL TEOU 2-8 nr E350605 and the most recent ISO 9001:2015 certifications. Politubes manufactures in-house in a modern 4.000 sqm plant in Italy few km far from Milano

Technical Specifications Distal Connector: Din-Style Lead Cable Color: Gray Lead Cable Diameter: 4 mm Lead Cable Material: PVC Jacket Lead Color Coding: IEC Cable Length: 90 cm Lead Cable Length Limb: 90 cm Lead Cable Length V: 90 cm Lead Number: 5 Proximal Connector: Adhesive Electrode - Neonate

Wago is the leading cable installation connectors manufacturer, since safety and reliablity experienced millon times by workmanship all over the World. One of the common fire source is electrical connections caused by several reasons as faulty workmanship, connection loosening due to vibration or environmental conditions. High quality connectors reduces the workmanship failures and serves under defined harsh environmental conditions for a long time. Advantages: Cost Efficient Reduces Workmanship Reduces Workmanship Failures Operates Under 85 C Temperature (Wago 221-613 Series) 6 mm2 Cross Section (Wago 221-613 Series) Available Robust and Reliable Structure 41A Current Carrying Capacity (Wago 221-613 Series) Application Area: Homes, Residential Buildings, Schools, Hospitals, Shopping Centers, Industrial Facilities and Any Connection Box with Suitable Cable Cross Section. https://polytechnic.com.tr