Results for
EC PLAZA
South Korea
BIOXEL uses fine laser beam to minimize skin damage by heat and to shorten the recovery and rejuvenation period. Treatment time can be shortened by adjusting spot size and the beam density, which is beneficial for both of the operator and the patient. [Features] Fractional Mode & General CO2 Mode & Dental Mode & LVR Mode Reduced Pain & Excellent Effectiveness Three Patterns : ARRAY, GRID, RANDOM Smart & Various Protocols for User’s Convenience Max 4489 dots to an area of 20x20mm Various scan shapes: Square, Hexagon, Triangular, Circular [Application] Fractional Hand Piece Skin tightening, Wrinkles, Large Pore, Skin Resurfacing, Acne scar, Stretch Mark, Laser Peeling, Age Spot, Pudenda, etc. General Hand piece (50mm or 100mm) Mole, Wart, Freckles, Birthmarks, Tumor elimination, Condylom, Syringoma, Snoring.
Request for a quoteVIRMER
Netherlands
Chiller CW-5000 is suitable for working with CO2 laser tubes up to 100-120W. Such cooling systems keep the rated power of the laser as long as possible. Product Features: Cooling Capacity: 800W Active cooling Temperature stability: ±0.3°C Temperature control range: 5°C ~35°C Refrigerant: R-134a Compact, portable design and quiet operation High efficiency compressor Top mounted water fill port Integrated alarm functions Low maintenance and high reliability 50Hz/60Hz dual-frequency compatible available Optional dual water inlet & outlet
Request for a quoteVIRMER
Netherlands
Chiller CW-3000 is suitable for CO2 laser tubes up to 50W. Such cooling systems keep the rated power of the laser as long as possible. Product Features: Heat dissipation capacity: 50W/℃, meaning it can absorb 50W of heat by rising 1°C of water temperature; Passive cooling, no refrigerant High speed fan 9L reservoir Digital temperature display Built-in alarm functions Easy operation and space-saving Low energy and environmental
Request for a quoteVIRMER
Netherlands
Lens D20 F50.8 is installed inside the laser head of the machine with a seat size (diameter) of 20 mm. Chamfered edges eliminate the risk of scratches and chips during installation. The average focal length of the lens is 2 inches, which allows processing non-metallic materials with high detail. Focus lenses made of zinc selenide. These are lenses of high quality and increased hardness. It require careful and careful handling, special measures during installation, replacement and operation.
Request for a quoteVIRMER
Netherlands
JPT Opto Electronics is a manufacturer of laser equipment. The company was founded in 2006 and specializes in investigation, development, production and sales of laser equipment and related products. The company owns a number of patents and intellectual property rights and produces several types of fiber lasers: continuous wave lasers, quasi-cw, lasers for scientific proposes, variable-wavelength lasers, fiber amplifiers, ASE emission units, etc. These products are widely used in the fields of laser marking and engraving, 3D printing, DTS systems and scientific research. The company has fully implemented the ISO 9001 quality management system and EPR system, and provides comprehensive pre-sales and after-sales services for all customers.
Request for a quoteVIRMER
Netherlands
WATTSAN FL TL fiber marker is used to process metals and a number of non-metallic materials. Its main advantages are reliability, high accuracy, and operation speed. One of the features of the machine is a launch pedal for serial production. Advantages: High quality edge. Positioning accuracy up to 0.03 mm. High speed of processing. Ease of operation. Economical energy consumption. Durability. No consumables needed. Options and features: Different types of a fiber emitter available: MAX Photonics (included in the basic version), RAYCUS, IPG. Different working areas available: 200х200 mm (for the basic version), 300х300 mm. Installation of a rotary device. Emitter service life One of the main advantages of a fiber marker is its durability, as the service life of such a machine is about 100 000 hours.
Request for a quoteVIRMER
Netherlands
The gas laser marker WATTSAN CO2 LT is designed to work with leather, fabric, paper, rubber, wood, ceramics, glass, plastic, and other materials. It is ideal for applying logos, photos and alphanumeric information. For ease of use, the marker is equipped with a launch pedal, which significantly facilitates the work in the numbering of finished products and mass production. Options and features: A 30 or 50 Watts Yongli laser tube with a service life up to 10,000 hours. Installation of a rotary device. Different working areas available: 150x150 mm, 200x200 mm, 300x300 mm. Laser power The machine is equipped with a laser tube of 30 to 50 Watts with a service life of 10,000 hours. Although this type of laser is less durable compared to the fiber optic one, its replacement will cost much less.
Request for a quoteVIRMER
Netherlands
This bench-type device is designed for marking metals (including rare ones), plastic, rubber, PVC, epoxy resin, ceramics. It is a portable type of a laser marker, which makes it possible to apply markings in inaccessible places, as well as on heavy and oversized objects. The complete set includes a launch pedal that ensures continuous operation of the machine. Scopes of application: Metal tools. Spare car parts. Cutlery and utensils. Phone and keyboard buttons. Wristwatch. Options and features Different types of a fiber emitter available: MAX Photonics (included in the basic version), RAYCUS, IPG Installation of a rotary device Emitter power The marker is equipped with a 20 Watts laser, which allows marking with a quite high speed and accuracy. The service life of the emitter reaches 100 000 hours, which guarantees an exceptionally long period of continuous operation at no additional cost. The advantage of laser marking is non-contact and no mechanical damage.
Request for a quoteVIRMER
Netherlands
The marker is intended for marking different kinds of metals and some non-metallic materials. The main advantage of the laser marker is high speed and exceptional processing accuracy, which allows you to obtain high-quality and detailed images. One of the features of this machine is a launch pedal, which is indispensable for the numbering of finished products and mass production. Advantages: High quality edge Positioning accuracy up to 0.03 mm High speed of processing Ease of operation Economical energy consumption Durability No consumables needed Options and features: Different types of fiber emitter available: MAX Photonics (included in the basic version), RAYCUS, IPG. Different working areas available: 200х200 mm (for the basic version), 300х300 mm. Installation of a rotary device. Emitter service life This fiber laser is considered quite durable because the emitter has a service life of 100 000 hours - this figure cannot be compared to a CO2 laser’s one.
Request for a quoteVIRMER
Netherlands
The Wattsan 0503 CO2 laser cutting machine is an advanced medium format model for laser cutting and engraving non-metal materials. Laser cutting machine designed for serial laser cutting and engraving, it can easily handle wood, plywood, cardboard, paper, plexiglass, acrylic, plastic, rubber, leather, fabric,s and fur. Through table: enables the laser cnc machine to work with materials of unlimited length. The design of the equipment allows you to remove the front wall and use the freed space for through cutting. Work area - 500x300 mm with a manual lifting table, which is necessary for processing bulky products up to 20cm (7.87 in) thick, makes it possible to install a rotary device. And then the CO2 laser machine is used for engraving on cylindrical surfaces. It will be convenient for you to work with different heights of the material. Work area====500 x 300 mm Tube power====60W Max engraving speed====700 mm /s Dimensions====650 mm * 1040 mm * 575 mm Net Weight====104kg
Request for a quoteVIRMER
Netherlands
The Wattsan 1290 Duos ST laser machine is an advanced medium format model for laser cutting and engraving of non-metallic materials. The two heads work synchronously with a minimum distance of 130 mm from each other, thus the machine can simultaneously cut or engrave two identical objects. Engraving : wood, plywood, cardboard, plastics, rubber, leather, fabric, fur, plexiglass (acrylic), PET, MDF, glass, stone etc. Cutting : wood, plywood, cardboard, paper, plastics, plexiglass (acrylic), leather, fabric, fur, PET, MDF, rubber, paronite, foam rubber. Through table The most important advantage of the 1290 DUOS is the ability to work with unlimited material lengths. The fact is that the design of the equipment allows you to remove the front wall and use the freed-up space for through cutting. Work area = 1200 x 900 mm
Request for a quoteVIRMER
Netherlands
The Wattsan 1290 Duos LT laser machine is an advanced medium format model for laser cutting and engraving of non-metallic materials. The two heads work synchronously with a minimum distance of 130 mm from each other, thus the machine can simultaneously cut or engrave two identical objects. Engraving : wood, plywood, cardboard, plastics, rubber, leather, fabric, fur, plexiglass (acrylic), PET, MDF, glass, stone etc. Cutting : wood, plywood, cardboard, paper, plastics, plexiglass (acrylic), leather, fabric, fur, PET, MDF, rubber, paronite, foam rubber. Through table The most important advantage of the 1290 DUOS is the ability to work with unlimited material lengths. The fact is that the design of the equipment allows you to remove the front wall and use the freed-up space for through cutting. Work area = 1200 x 900 mm
Request for a quoteVIRMER
Netherlands
The Wattsan 1610 DUOS ST medium format laser machine is designed for mass production and cutting non-metallic materials. The machine is equipped with two cutting heads which enable it to process materials at an incredible speed. The Wattsan co2 laser machine can simultaneously cut or engrave two identical objects. Engraving : Wood, plywood, cardboard, paper, plastic, plexiglass (acrylic), leather, fabric, fur, PET, MDF, glass, stone, etc. Cutting : Wood, plywood, cardboard, paper, plastic, plexiglass (acrylic), leather, fabric, fur, PET, MDF, rubber, paronite, foam rubber The anodized blades prevent the laser beam from bouncing and hitting the laser head or the operator.
Request for a quoteVIRMER
Netherlands
WATTSAN 2030 Flat Bed can handle roll materials and large format sheets. Cutting and engraving are carried out at high speed: 600 mm/s for cutting and 800 mm/s for engraving. The machine maintains consistently high quality characteristics when cutting and engraving: a smooth edge, ray positioning without errors, absolute identity of serial blanks, etc. The advantages of the machine include an extensive list of materials suitable for contact with a laser: fabrics, wood, plastics, paper, rubber, fur. Distinctive features of WATTSAN 2030 Flat Bed equipment: large working table 2000x3000 mm; lamella table made of anodized aluminum; powerful laser tube with stable radiation Lasea F2 80-95 Watts, which works 6000 hours; the ability to network and connect via USB; RuiDa RDC6445 controller, which is responsible for the operation of 3-phase stepper motors; in addition, you can install a chiller and a laser tube of higher power up to 180 Watts.
Request for a quoteVIRMER
Netherlands
The Wattsan 1610 DUOS LT medium format laser machine is designed for mass production and cutting non-metallic materials. The machine is equipped with two cutting heads which enable it to process materials at an incredible speed. The Wattsan co2 laser machine can simultaneously cut or engrave two identical objects. Engraving : Wood, plywood, cardboard, paper, plastic, plexiglass (acrylic), leather, fabric, fur, PET, MDF, glass, stone, etc. Cutting : Wood, plywood, cardboard, paper, plastic, plexiglass (acrylic), leather, fabric, fur, PET, MDF, rubber, paronite, foam rubber The anodized blades prevent the laser beam from bouncing and hitting the laser head or the operator. The through table allows the CNC laser machine to process materials of unlimited length.
Request for a quoteVIRMER
Netherlands
The large format laser machine Wattsan 1610 LT is designed for cutting and mass production of products from non-metallic materials. The device provides high-precision machining with a positioning accuracy of up to 0.01mm, and is easy to use and durable. Engraving : wood, plywood, cardboard, plastics, rubber, leather, fabric, fur, plexiglass (acrylic), PET, MDF, glass, stone etc. Cutting: wood, plywood, cardboard, paper, plastics, plexiglass (acrylic), leather, fabric, fur, PET, MDF, rubber, paronite, foam rubber. Through table The most important advantage of our machine is its ability to work with unlimited lengths of material. Three Phase Stepper Motors They are characterized by increased accuracy and reliability, as well as provide a smaller step when engraving.
Request for a quoteVIRMER
Netherlands
The Wattsan 1290 LT large format laser machine is designed for cutting and mass production of non-metallic material products. Engraving: Wood, plywood, cardboard, paper, plastic, Plexiglas (acrylic), leather, fabric, fur, PET, MDF, glass, stone, etc. Cutting : Wood, plywood, cardboard, paper, plastic, plexiglass (acrylic), leather, fabric, fur, PET, MDF, rubber, paronite, foam rubber The nozzle design ensures a clean cut on all types of materials, including plywood and leather. All Wattsan CO2 laser cutting machines are equipped with a funnel-shaped container to collect the cutting waste. The funnel also serves to reinforce the structure of the machine. This machine is equipped with a work table whose height adjusts automatically.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
VIRMER
Netherlands
The Wattsan 6090 LT laser machine is an advanced medium-format model for laser cutting and engraving of non-metallic materials. Due to its convenient working area, of 900x600mm, it is often used in industries, such as souvenirs, advertising, design, light, home decor, outdoor signage, stencils, etc. There are two versions of this model, with a lifting table and without. The lifting table is equipped with a chain that allows modifying the height of the working area. That allows working with heavy products up to 80 kg, for example, stone. Engraving : wood, plywood, cardboard, plastics, rubber, leather, fabric, fur, plexiglass (acrylic), PET, MDF, glass, stone etc. Cutting : wood, plywood, cardboard, paper, plastics, plexiglass (acrylic), leather, fabric, fur, PET, MDF, rubber, paronite, foam rubber. Unique cutting head We design our machines with universal cutting heads with wide and narrow nozzles. The wide nozzle blows away combustion residues and promotes better engraving.
Request for a quoteVIRMER
Netherlands
0203 micro - Table CNC Laser Machine The Wattsan 0203 micro is a tabletop laser machine designed for hobby and small-scale production. Compact and relatively light, this laser machine can be placed on a work surface or even a table and is ideal for use in workshops or garages. Engraving : wood, plywood, cardboard, paper, plastic, plexiglass (acrylic), leather, fabric, fur, PET, MDF, glass, stone etc. Cutting : wood, plywood, cardboard, paper, plastic, plexiglass (acrylic), leather, fabric, fur, PET, MDF, rubber, paronite, foam rubber Laser machine Wattsan 0203 micro is equipped with a 40W laser tube. Tube service life = 1500h. Work area = 200 x 300 mm Tube power = 40W Max engraving speed = 700 mm Dimensions = 810 mm * 500 mm * 265 mm Net Weight = 38 kg
Request for a quoteVIRMER
Netherlands
JPT Opto Electronics is a manufacturer of laser equipment. The company was founded in 2006 and specializes in investigation, development, production and sales of laser equipment and related products. The company owns a number of patents and intellectual property rights and produces several types of fiber lasers: continuous wave lasers, quasi-cw, lasers for scientific proposes, variable-wavelength lasers, fiber amplifiers, ASE emission units, etc. These products are widely used in the fields of laser marking and engraving, 3D printing, DTS systems and scientific research. The company has fully implemented the ISO 9001 quality management system and EPR system, and provides comprehensive pre-sales and after-sales services for all customers.
Request for a quoteVIRMER
Netherlands
The Co2 laser cutting machine Wattsan 6040 is designed for serial laser cutting and engraving, it can easily handle wood, plywood, cardboard, paper, plexiglass, acrylic, plastic (except PVC), rubber, leather, fabrics and fur. Engraving is possible on glass, ceramics, and some stones, as well as on aluminum and other soft metals using thermal paste. Engraving on the machine is possible on materials up to a thickness of 25 cm (9.8 in). Through table: allows the laser cnc machine to work with material of unlimited length. The design of the equipment allows you to remove the front wall and use the freed space for through cutting. The working field of the laser cutting machine measuring 600x400 mm with a manual lifting table, is necessary for processing volumetric objects up to 25cm (9.8 in) thick. Work area = 600 x 400 mm Tube power = 80-90W Max engraving speed /s = 500 mm Dimensions = 765 mm x 1165 mm x 600 mm Net Weight = 121 kg
Request for a quoteVIRMER
Netherlands
The WATTSAN 6040 laser machine is a professional laser equipment for various tasks: from advertising to small industrial production. The machine is equipped with a through table, which allows you to use the working space more efficiently and even work with rolled materials up to 60 cm wide. The machine is equipped with a Lasea F2 laser tube with a power of 80 Watts. This machine cuts wood materials up to 8 mm and plastics, acrylics and plexiglass up to 12 mm. You can replace the handset with a more powerful one. This modification will allow cutting wood up to 10 mm and acrylic up to 15 mm. Install the cooling system (chiller). The machine will cool down the tube so that the tube lasts as long as possible. If you are engaged in souvenir products, then you may be interested in a rotary device. Such a mechanism will scroll a cylindrical workpiece while engraving will be applied to it.
Request for a quoteVIRMER
Netherlands
JPT Opto Electronics is a manufacturer of laser equipment. The company was founded in 2006 and specializes in investigation, development, production and sales of laser equipment and related products. The company owns a number of patents and intellectual property rights and produces several types of fiber lasers: continuous wave lasers, quasi-cw, lasers for scientific proposes, variable-wavelength lasers, fiber amplifiers, ASE emission units, etc. These products are widely used in the fields of laser marking and engraving, 3D printing, DTS systems and scientific research. The company has fully implemented the ISO 9001 quality management system and EPR system, and provides comprehensive pre-sales and after-sales services for all customers.
Request for a quoteVIRMER
Netherlands
This model of the laser machine is ideal for cutting large batches of non-metallic materials
Request for a quoteVIRMER
Netherlands
Laser tube RECI W6 130-160W for laser machines. The tube technology is based on CO2 gas. Constant cooling is required for long-term operation of the tube, so we recommend paying attention to one of the chillers (cooling systems) of the CW series.
Request for a quoteVIRMER
Netherlands
Ruida RDC6442G controller is compatible with Ruida RDC6442G color display, which is also in our catalog. The device has an internal memory of 128 MB. There are 15 LEDs on the case for diagnosing the operation of the equipment. There are 3 connectors on one side of the device: two for connecting to a computer and one for a USB drive. On the other side there are connectors for connecting the display, power supply, high voltage unit of the Z series. You can connect two high voltage units at once.
Request for a quoteVIRMER
Netherlands
Chiller CW-5300 is suitable for working with CO2 laser tubes up to 180W. Such cooling systems keep the rated power of the laser as long as possible.
Request for a quoteCRYLAS CRYSTAL LASER SYSTEMS GMBH
Germany
Our Master Oscillator Power Amplifier – MOPA for short – series contains a diode-pumped power amplifier in addition to a DPSS laser. High peak or high average power – whatever your application requires. Due to the special technical design of the laser system, it works in transversal single-mode operation with high peak-to-peak pulse power stability, medium medium power stability and short pulse duration of around 1 to 2 ns. The laser can be triggered either via an external signal source or via an internal oscillator using software commands. The MOPA532-250 is a high-peak power MOPA with a peak pulse power of over 180 kW. It delivers 250 µJ single pulse energy and can operate at repetition rates up to 1 kHz. The pulse energy is adjusted via simple terminal or software commands. The laser system is suitable for laser marking and processing as well as for applications in analytical measurement technology.
Request for a quoteCRYLAS CRYSTAL LASER SYSTEMS GMBH
Germany
Our Master Oscillator Power Amplifier - MOPA for short - series contains a diode-pumped power amplifier in addition to a DPSS laser. High peak or high average power - just as your application requires. Due to the special technical design of the laser system, it works in transverse single-mode operation with high peak-to-peak pulse power stability, good average power stability and a short pulse duration of around 1 to 2 ns. The laser can be triggered either via an external signal source or via an internal oscillator using software commands. The MOPA1064-2000 mW is a quasi-CW MOPA with a maximum repetition rate of 20 kHz. It delivers 140 µJ single pulse energy and an average power of up to 2 W. The pulse energy can be set via simple terminal or software commands. The laser system is suitable for laser marking and processing as well as for applications in analytical measurement technologies.
Request for a quoteResults for
Laser instruments - Import exportNumber of results
87 ProductsCompany type