Large heating systems - Import export

Control Panels for electrical process heaters OhmEx has extensive experience in the design of heater control systems and requirements for ‘load splitting’. Loads can also be divided into stages to give thyristor control and in addition combinations of thyristor and contactor control can be supplied to provide a fully synchronised system and limit impact on the power generating system. We can recommend cost-effective solutions to clients, outline requirements, or work to detailed specifications. In-house design facilities are supported by experienced engineers, backed-up by modern CAD facilities. OhmEx adopts an integrated project management approach to each contract, which provides effective co-ordination of design, procurement, manufacture, test and, where required, commissioning. Attention is paid to ensuring that each system is built to the demanding standards of our client, the environment and current legislation. Each control system is fully function-tested for correct operation, as a standard. Each test is simulated using the correct type of input signals to avoid start up and commissioning problems. A range of temperature control systems suitable for anything from small space heating systems to large process heating systems, including full PID control can be offered.

Industrial furnaces & boilers School, church, town hall & large swimming pool heating systems. Colleges and universities. Large residential blocks. Waste incinerators.

High capacity range dry cooler series, perfect for large industrial refrigeration systems. 4 heat exchangers and double fan row can provide especially large heat capacity within limited placement area, making it the unit with the highest power supply per square meter. Available heat capacity ranges over 1 MW under nominal conditions (when ETG is 35%, Tin is 45°C, Tout is 40°C and Tamb is 35°C). W shaped large construction, assembled with smooth copper tubes, aluminum or copper fins and AC/EC fan motor technology. The clever frame design also allows for the installation of additional equipment under the dry cooler.

CSN® explosionproof flow heaters are used for heating up flowing gases and liquids in hazardous areas. The devices consist of explosionproof flanged immersion heaters, which are installed in corresponding pipe or pressure vessel. Our products realize individual solutions for complicated technical process. Different heating systems for heating up liquids, nitrogen or other gases activate exact determinded processes in chemical factories. In close discussion with our customers problems will be defined and changed in technical optimale solutions. Our QualityManagementSystem ensures the high quality level of our customers. Further information about our CSN® Exflow heater

Automatic air vent, nickel-plated ½” M Plastic automatic air vent ½” M Brass automatic air vent ½” M

3BAR safety valve M 6BAR safety valve M

The FLX-PLO-EPP-F plenum boxes are part of the FLX-REKU air distribution system designed for domestic mechanical ventilation systems, so-called the MVHR system, to which an air valve and FLX-HDPE / FLX-HDPE-A ducts with a diameter of Ø75 are mounted.

The heat recovery ventilation unit HRU-PremAIR has an air flow capacity of 350 m3/h at 100 PA. Designed to use aluminum heat exchangers and EPP self-supporting casing. Heat exchangers that are used depend on the model, such as counterflow aluminium heat exchanger (HRV) or counterflow enthalpy exchanger (ERV).

Floor heating systems

Like the slightly less powerful MA series, it is guaranteed absolutely exhaust-free hot air. In addition, the units can be operated not only with oil, but are also approved for gas operation. The operating mode can be flexibly adapted to the conditions on site. Thus, the devices can be used in all areas. Hot air hose systems can also be connected without any problems thanks to the high-performance radial fans. Consequently, effective heating from outside is also possible without any problems. The recirculation module ensures efficient and economical operation. The oil burner blowers are made of high-quality materials by renowned manufacturers. They work so efficiently that 93% of the energy can be converted into heat.

Efficient Heating Solutions: HPTH, HPTD Series Explore our versatile HPTH and HPTD series ranging from 60 to 500 liters, designed for optimal thermal performance. HPTH Series: Wall Mounted Capacity: 60 – 500L Insulation: Solid, Class "B" Material: Hard Foamed Polyurethane (PU) Adjustable Legs: Specifically for 200-500L models Pressure: Max 3 Bar Temperature Range: -20°C to 95°C HPTD Series: Floor Standing Insulation: Class "C" Material: Hard Foamed Polyurethane (PU) Pressure: Max 3 Bar Temperature Range: -20°C to 95°C These series offer reliability, energy efficiency, and adaptability, ensuring a seamless integration into various heating systems. Upgrade to cutting-edge solutions with KHT.

Where can I find boiler repair near me in Plymouth? The Plumbing Doctor is your go-to solution for boiler repairs and all types of heating work. You can contact us for any of your heating needs, including: Boiler repair, installation, or servicing Valves, pumps, and thermostats Radiators and heated towel rails Immersion heater design and installation Unvented hot water system installation Landlord safety certificates We also handle all pipework Are you finding it hard to stay warm this winter? If your boiler no longer seems as efficient, you may need a professional boiler service. Do not wait for your central heating system to break down. If you want to stay safe and warm this winter, get on the phone and call us today.

A-class energy efficiency, hygienic hot water, solar thermal, buffer, hydraulic separator, thermal stratification, electric heater back up. The reservoir is made of a unique combination of thermal resistant plastic and fiberglass composite material which is not possible to rust, with outstanding 30 years warranty. Heat exchangers made of corrugated stainless steel pipe made of "Inox 316 L" suitable for hygienic water, 10 years warranty.

Hamon Deltak, Inc. has had the opportunity to engineer and manufacture more than 500 HRSGs in the last 40 years. From big to small, with different levels of complexity, our engineers have experience with the type of project you need. What sets HDI apart is the level of care that goes into engineering each HRSG project, and since half of our engineers have been at HDI for more than 15 years, it's easy to see why our HRSG standard is synonymous with quality.

Our quality SANHA ball valves are made of brass CW 617N and can be delivered in a multitude of versions such as with threaded and press ends, or in the dimensions 15-54 mm, 16-26 mm and ½" to 2". The ball valves can be easily and quickly combined with all SANHA systems, thus providing a real alternative to conventional products. With SANHA ball-stop valves we provide our customers with the oppurtunity for an optimal safe and at the same time very economical solution for the installation of machinary, equipment or other facilities such as risers.

A-class energy efficiency, hygienic hot water, solar thermal, buffer, hydraulic separator, thermal stratification, electric heater back up. The reservoir is made of a unique combination of thermal resistant plastic and fiberglass composite material which is not possible to rust, with an outstanding 30 years warranty. Heat exchangers made of corrugated stainless steel pipe made of "Inox 316L" suitable for hygienic water, 10 years warranty.

QubeX is unpressurized hot water storage tank, hygienic water heater and drain back reservoir in the same time.

Why not choose your under-floor heating system from Speed Screed? • We can offer a totally bespoke service • Fully designed to your exact requirements • Supply of al membranes, insulation, perimeter expansion strips and movement jointing • Our systems are manufactured by the best in the business • We provide a complete package including screed installation • Everything taken care of with no fuss and to your program with no delays. ? Why choose underfloor heating over radiators? Using one of our under floor heating systems has a host of benefits opposed to traditional heating methods such as radiators, comfort, reliability and reduced costs. Underfloor heating provides an ideal air temperature profile in your rooms through the correct balance of radiant and convicted heat. ? Heat Where You Need It Most heating systems heat from the top down, which can leave us feeling uncomfortable.

The heat accumulator VТА/V-1 is assembled from two different tanks in size, in the space between them is created an average vacuum (0,1 mBar) and filled with insulating powder (λ=0.007-0,01W/m∙K). Compared to traditional heat accumulators, the VTA/V-1 minimizes heat loss for effective heat storage. Its powder-vacuum insulation (PVI) replaces the standard 100cm of urethane-foam isolation. PVI’s thermal conductivity ranges from 0.007 to 0.01W/m∙K, significantly lower than rock wool (0.06W/m∙K) and urethane foam (0.04W/m∙K). The VTA/V-1 occupies similar space to traditional models. Key benefits include: — capacity of 2000-10000 liters; — possibility outdoor installation; — underground installation capability; — up to 10 times better thermal insulation in comparison with analogues; — absolute insulation moisture resistance; — long-term heat retention(ideal for heat pumps and solar collectors); — stable temperature stratification of heat carrier through the system of stratification.

Waste heat recovery boiler, in steam, water or thermal oil, fire-tube or water tube, designed as per exhaust gas parameters, turnkey project flexible solutions.

eldec brazing systems: automatic induction brazing of pole coils The semi-automatic equipment is designed for manufacturing pole coils of hydro and wind power generators. The machine is based on the experience of the previous manufactured equipments. The machine is designed as a sturdy, high quality and low maintenance machine. The operating is very simple, on automatic mode by 2-hand operation with step by step program and on manual mode by touch-panel.