Wheel - Import export

ALUMINUM LIFT TABLE Aluminum lift table, lightweight and practical with 100 kg capacity and maximum lifting height mm. 755. Folding handle.

Wheeled lifting platforms with single pantograph, hydraulic foot pedal pump, 4 wheels (2 fixed and 2 steering), brake, chrome handle for pushing, hand lever for the controlled speed descent, oven painting.

WHEELED BASES FOR DRUMS SERIES SD FP55 (DRUMS DIAMETER mm. 580/600) Reinforced wheeled bases for the transport of drums with a diameter of about 610 mm. and weight max. 250 Kg. The SD Series enables a high stability and security because it has wheels polyurethane installed outside the structure. The wheeled bases are available in yellow. Available models: SD FP55B wheeled base made of painted steel SD FP55D wheeled base made of stainless steel SD FP55F wheeled base made of painted steel - reinforced

DOUBLE PANTOGRAPH WHEELED PLATFORMS Double pantograph lifting platforms with pedal pump, 4 wheels, 2 fixed and 2 pivoting, holding brake, chrome handle for pushing, hand lever for the descent at a controlled rate, enamel paint dried in the oven.

It can be realized in economic manner and with reduced overall dimensions with roller conveyors curves up to 180 °. This type of roller conveyors are an economical solution to the problem of handling boxes and packs along 90 ° or 180 ° paths, avoiding the use of more expensive pneumatic diverters. The idle 90 ° curves can be combined to obtain 180 ° curves, and allow you to create packaging lines even in confined spaces, thanks to their small footprint. They have widths of 500-650-800 mm and can be equipped with metal wheels with a diameter of 48 mm, or metal rollers with a diameter of 32 or 48. The metal wheels, thanks to their particular smoothness, allow the advancement of the boxes also with a minimum inclination.

WHEELED VACUUM PACKAGING MACHINE DZ 400 2E WITH TWO SEALING BARS Wheeled vacuum packaging machine with two lateral sealing bars, made of stainless steel (AISI 304) and equipped with volumetric electronic sensor that enables the continuous vacuum control. Tank with with rounded lid for greater usable height in the central part. The compact size of the tank and the high power of the vacuum pump ensure high productivity. The adjustment of the welding time, vacuum and gas placing occur through practical potentiometers positioned frontally. VACUUM MACHINE WITH GAS INJECTION SYSTEM (MAP) Each sealing bar is equipped with two nozzles which introduce gases in different quantities, so the machines are suitable for the packaging of one single use for each sealing bar. When ordering, it is possible to request a modification to the gas inlet system so as to be able to pack two bags per bar by entering the same quantity of gas for each package.

Trolleys FP with hook fastening barrel and fork holding. FP Trolleys are available in three different models. - Model FP15 - Model with two solid rubber wheels 200mm - Model FP79 - to 300-liter barrels. Model with 3 wheels cushion 260 mm - Model FP36 tippers - Model with 4 solid rubber wheels. FP 15 - CART FOR DRUMS WITH 2 WHEELS Trolley FOR drums FP 15, equipped with a hook fastening for barrel and fork holding.Complies with CE standards.

Mechanical platform with wheels and single pantographwith actuation by crank. The platform consists of a sturdy steel frame and is equipped with polyurethane wheels with locking brake. The movement ascent and descent takes place through the actuation of a crank with threaded pin which opens and closes the pantograph. Turning the handle clockwise opens the pantograph and the platform is lifted, naturally turning counterclockwise this lowers. (is the system of mechanical cric). The mechanical crank platform is used primarily as a work surface and where you have to make a few lifting because it is slower than the hydraulic models. It 'also suitable for assembly of molds or mechanical components in tight spaces because it does not have the the driving tiller and is not bulky.

SHORT MANUAL PALLET TRUCK MODEL FPBF25 L950 Structure in drawn steel with rounded fork tips. Hydraulic unit built entirely of steel mounted on high precision thrust bearing. Control lever 3 positions with adjustable lowering speed. Lifting operated rudder and automatic recall upright. Safety valves for hoist limit and overload. Directional wheels aluminum with rubber elastic diameter 200 mm. mounted on ball bearings. Load nylon rollers diameter 82 mm with double ball bearings.

MANUAL TRANSPALLET MOD. FP BFZ 20 W 320 NARROW With special joined forks and only 320 mm width. Maintains the solid structure of pallet standards but allows the handling of heavy loads with reduced dimensions.

Grinding Wheel Holder 35x39 for Breton stoneworking machines, manufactured in Italy and always in stock in Italy, USA, Spain and Czech Republic.

This High Performance Nonwoven and cloth material is converted into wheels with a split pin hole for satin finish machines. Main features and benefits: These wheels offer better cutting performance than nonwoven wheels whilst ensuring high finishing quality and excellent user friendliness combined with highly efficient ventilation and low-noise levels typical of nonwoven products. Thanks to a unique 4-split-pin system, the abrasive tool can be efficiently driven and quickly fit. Recommended applications: Light deburring and cleaning. Satin finishing small and large surfaces. Removing scale. Removing marks left by previous operations. Work surfaces: Stainless steel, standard or alloyed steel, nonferrous metals and alloys, aluminium, cast iron, titanium.

These are similar to the Satin Machine wheels but are made laying the non woven in a way that waved edges are obtained. Features and benefits: For applications on wide areas which require a higher uniformity finishing, the RFV allow a higher uniformity among the various steps on the surface. Recommended applications: Satin finishing large surfaces. Work surfaces: Stainless steel, standard or alloyed steel, nonferrous metals and alloys, aluminum, cast iron, titanium, plastic.

BUW material made in quick change discs. Main features and benefits: The quick change discs can be used in areas difficult to reach as the BUW material can be used on the two faces and on the external diameter. Recommended applications: Deburring, Cleaning, Blending and Finishing and polishing of a wide range of parts. Work surfaces: Any kind of metal (stainless steel, titanium, aluminium, alloys), plastic and composite.

This High Performance Nonwoven material is converted into wheels with a split pin hole for satin finish machines. Main features and benefits: These nonwoven wheels with a hole offer consistent finishing quality, highly efficient ventilation, flexibility, excellent user friendliness, low-noise levels and resistance to clogging. They can be cleaned using compressed air or water. The abrasive tool is efficiently driven by means of a unique 4-split-pin system and can be quickly fit. Recommended applications: Light deburring and cleaning. Satin finishing small and large surfaces. Removing scale. Removing marks left by previous operations and re-finishing after bending, welding or satin coil moulding. Work surfaces: Stainless steel, standard or alloyed steel, nonferrous metals and alloys, aluminium, cast iron, titanium, plastic.

Aluminium oxide cloth, X Flex weight. Main features and benefits: Excellent combination of user friendliness and durability. The cloth used ensures a perfect balance of flexibility and strength. The abrasive tool is efficiently driven by means of a unique 4-split-pin system. Recommended applications: Finishing large flat, concave or convex surfaces; grinding the inner and outer surfaces of tanks and containers. Removing and cleaning weld beads. Work surfaces: Stainless steel, standard steel, alloyed steel, aluminium, titanium, nonferrous materials and alloys, plastic, plastic reinforced by fibre glass, marble, stone.

BUW material is made of layers of abrasive Non Woven material impregnated with resin and compressed, designed to offer the best finishing joined to high tear resistance and long lifetime, converted in wheels with hole. Main features and benefits: The BUH offers all the advantages of the Non Woven products (cool running, low loading, consistent finishing) with excellent lifetime and high resistance if used on edges or sharp parts. BUH are available in different densities (from density 2 soft up to 8 extremely rigid), grit sizes (Fine, Medium and Coarse) and type of abrasive (S-Silicon Carbide, A–Aluminium Oxide) Recommended applications: Deburring, Cleaning, Blending and Finishing and polishing of a wide range of parts. Work surfaces: Any kind of metal (stainless steel, titanium, aluminium, alloys), plastic and composite