Polypropylene seals - Import export

PNEUMATIC SEALER CP 500 Electropneumatic sealer with double sealing impulse bar with (the resistance heat for a few seconds) suitable for closing packaging polyethylene, PVC and polypropylene, coupled aluminum, etc. It has four positions of voltage to the sealing bar, timer for adjusting the welding time and timer for the cooling time. The double sealing bar (top and bottom) welded from 3 mm allows the closing of envelopes very thick, laminated bags and bellows. The closing of the bars takes place by a pneumatic cylinder unit with pressure and pedal control. Maximum thickness weldable 0.25 mm. The CP 500 can be easily oriented from 0 to 90 degrees.

Impulse sealers MG 820 series, with 820 mm sealing bar and suitable for sealing polyethylene, pvc and polypropylene bags. They have a special timer for adjusting the sealing time based on the thickness and type of material. The MG sealers are complete with a manual cutting unit for the trimming of the sealed bags and/or the creation of bags from tubular reels (if the machine is equipped with a roll holder). The sealers bars must be closed manually by the operator and are automatically held by a magnet until the end of the cycle. There are special supports with mechanical pedal, for the manual sealing machine and with electric pedal for the sealing machine with motorized bar closing. Available models: MG 820: bench sealing machine with manual closing of the bars MGMI 820: bench sealing machine with motorized bar closing and electric pedal

MG 421 SEALING MACHINE WITH CLOSING MAGNET Impulse sealers MG 421 series with 420 mm sealing bar and suitable for sealing polyethylene pvc and polypropylene bags. They have a special timer for adjusting the sealing time based on the thickness and type of material. The MG sealers are complete with a manual cutting unit for the trimming of the sealed bags and/or the creation of bags from tubular reels (if the machine is equipped with a roll holder). The sealing bars must be closed manually by the operator and are automatically held by a magnet until the end of the cycle. They can be equipped with special supports with mechanical pedal, for the manual sealing machine and with electric pedal for the sealing machine with motorized closing of the bars. The MG 421 series sealing machines are available with bars with mechanical or motorized closure with a sealing thickness of 3 or 5 mm depending on the model. There are also special models in stainless steel and with 2 parallel welds of 3 mm.

Model P329S with lithium ion (Li-Ion) 18V battery and reinforced motor for maximum autonomy (up to 450 strapping with a charge), the maximum tensile strength (up to 4000 N) and the reliability of the weld. The ease of insertion of the strap makes it very quick and simple to use. The independent settings of all parameters ensure optimum performance and maximum seal with polypropylene and polyester strapping of any size and quality.

New model P328/P328S with lithium ion (Li-Ion) 18V battery and reinforced motor for maximum autonomy (up to 600 strapping with a charge), the maximum tensile strength (up to 2400 N) and the reliability of the weld. The ease of insertion of the strap makes it very quick and simple to use. The independent settings of all parameters ensure optimum performance and maximum seal with polypropylene and polyester strapping of any size and quality.

This special automatic table top/vertical with stand constant heat sealer. Are suitable for sealing polypropylene and paired / laminated bags, paper, barrier materials, etc. The sealing jaws of the type "hot bar" are equipped with resistance and thermoregulator for controlling the temperature from 30 ° C to 200 ° C. The closing of the jaws is through an electromagnet which ensures a high sealing pressure and allows the sealing of thick bags with or without side gussets. Operation The operation provides for the closure of bars and seals the bag following operator control, by electric pedal. This allows the operator to grab the bag with both hands, being able to perform a more precise sealing and parallel to the bag. The vertical model with pedestal can be tilted to 90 degrees, has a special support surface to support the bag during sealing. In this way the operator has both hands free to hold the bag since the sealing is made by pressing the pedal.

ME-FDE SEALERS WITH DOUBLE MOTORIZED PULSE SEALING BAR AND TEMPERATURE CONTROL The new bench sealers with double impulse sealing bar and temperature control, allow the optimal sealing of any type of envelopes and sealable bags. The high pressure exerted by the motorized descent of the bars (0.7 Kg./cm2) allows perfect sealing even on very thick materials. The double active motorized sealing bar (heats above and below) and the 5 mm sealing they allow the closure of envelopes with high thickness, laminated and envelopes with bellows. In addition to sealing polyethylene, polypropylene, coupled paper, aluminum, pvc and medical bags, it also allows the sealing of advertising banners. To seal the banners, we recommend sending samples, without obligation, to carry out the sealing tests. Maximum sealable thickness 0.20 mm (0.40 tot). Timers for regulating the sealing and cooling temperature ensure maximum reliability on all types of material.

Continuous band sealer suitable for closing horizontal bags with a maximum height mm. 400 and max weight. 5 kg. By using PTFE seal belts, polyethylene, polypropylene, cellophane, paper, aluminum, and other laminates can be sealed. The temperature is controlled by an electronic controller and the speed is adjustable. The distance between the solder and the edge of the bag is 20 mm. The distance (width) between the welding headand the conveyor belt is adjustable and is also adjusted the height of the conveyor belt to the plane of welding. The machine is equipped with a marker rotary heat and interchangeable characters (20 charactersmax height 5 mm.), The system works with inked rollers for easy reading and comes complete withphotocell to make a mark at the desired point.

Heat-sealing roller FP802/803 with constant heat which allows the sealing of bags and heat-sealable materials. This roller allows you to make seals with different shapes (square, circular, etc.) according to your needs. Once the roller has been switched on, the operator must wait for the roller to warm up for about 10 minutes. The temperature is adjustable via a potentiometer and reaches a maximum of 200 ° C. There is no graduated scale. The temperature must therefore be set following practical tests on the material. The use is manual. The pressure, the sealing time and the temperature must be managed by the operator. The sealing result depends exclusively on its ability and therefore the result can vary between seals. The coating of the anti-adhesive Teflon roller allows to seal bags in polypropylene, polyethylene and laminated materials. It is supplied complete with a mat in silicone material which, positioned under the product to be sealed, is the ideal match for sealing.