Roll-on - Import export

Laminated examination couch roll. It's disposable, hygienic and practical. Each roll is made of two layers, one in pure cellulose and one in polythene. The embossing of the cellulose ply makes the product pleasant to the touch, to guarantee greater comfort during the medical examination. The roll is perforated to facilitate tearing: changing the sheets between patients is quick and easy, without wasting paper. The perforated laminated embossed medical roll is available in packs of 6 rolls. Each roll is individually packaged, to have a better hygiene of the product, even when stored in your warehouse before use. The product is available in two colours: white or blue.

Sturdy and professional roll holder suitable for the unwinding of heavy plastic reels film made of polyethylene. Load 100 Kg. Very robust reel holder, made of painted tubular steel and equipped with wheels with brake, it supports rolls with a weight of up to 100 kg and allows an operator to carry them out safely. The reel holders are made with the reel axis diameter 60 mm and length up to 2200 mm, very simple to rotate as it is mounted on ball bearings and equipped with cones for locking the reels. Depending on the presence or absence of the brake, the total width of the roll holder is approximately 200/300 mm wider than the useful width. The reel holder axis can be "idle" or "with brake".

HORIZONTAL DOUBLE CUTTERS BD 122 - BD 220 Universal cutters for cutting paper, corrugated cardboard, reinforced papers and polythene, polyethylene foil, polyethylene bubble, polyethylene foam. This series is very useful because you can use at the same time two different materials. The use of the cutter is extremely simple: it is necessary to carry the material to the desired length and manually operate the blade holding carriage, the cut is clean and precise in both directions. All the cutters are mounted on a frame complete with coil holder and rubber feet, on request may have the wheels with brake. For reasons of space the product is shipped disassembled. The cutter can be equipped with: RHOMBOIDAL BLADES: suitable for cutting plastic film, polyethylene foil, bubble wrap or foam. CIRCULAR BLADES: suitable for cutting paper, corrugated paper and reinforced.

The series of mesh containers with tight mesh are suitable for the transport of products in supermarkets, department stores, laundries, hotels, etc. The mesh of the walls with dimensions mm. 50 x 50 prevents leakage of the product. Equipped with three or four walls bolted to the base and fixed to each other with clamps. STEEL BASE: Base wire and steel pipe complete with wheels polypropylene (2 fixed and 2 swivel) mm. 106x 40 mounted on bearings with roller cages (flow x wheel Kg. 150) Mesh of shoulder mm: 50x50 h Mesh of base mm: 56x107Soldering at 360 ° on the wires Tubes reinforced in the shoulders Thick materials more 'solicited 5 holes for drainage ROLL CONTAINER MESH 50x50 with 3 or 4 WALLS AVAILABLE IN: CP 04.A0 base 500 x 800 height 1800 mm CP 04.A6 base 600 x 600 height 1800 mm CP 04.A1 base 600 x 800 height 1800 mm CP 04.A2 base 700 x 800 height 1800 mm CP 04.A4 base 600x1200 height 1800 mm CP 04.A3 base 800x1200 height 1800 mm

The series of containers with wide mesh are suitable for the transport and display of products in supermarkets and warehouses. Are easily removable for quick storage. STEEL BASE: Base wire and steel pipe complete with wheels polypropylene (2 fixed and 2 swivel) mm. 106x 40 mounted on bearings with roller cages (load x wheel Kg. 150) Shoulder Mesh mm: 110x405 h Base mesh mm: 45x130 Soldering at 360 ° on the wires Tubes reinforced shoulders Thick materials more 'solicited 5 holes for drainage Roll container with wide mesh, base 700x800 mm height 1600/1800 mm available in: CP04.01.2 standard 2 walls CP04.01.3 standard 3 walls CP04.01.4 standard 4 walls Roll container with wide mesh, base 600x1200 mm available in: CP04.06.2 2 walls, height 1800 mm CP04.06.3 3 walls, height 1800 mm CP04.06.4 4 walls, height 1800 mm Roll container with wide mesh, base 800x1200 mm available in: CP04.03.2 2 walls, height 1800 mm CP04.03.3 3 walls, height 1800 mm CP04.03.4 4 walls, height 1800 mm

Examination couch roll made of soft pure cellulose with two ply. The roll is perforated for easy and waste-free use. The couch roll is ideal to be used not only in doctors' surgeries, but also in beauty centers, tattoo studios and in all those contexts where the patient lies on the couch and it is therefore necessary to restore the hygiene of the bed itself before treating the next patient. The product is available in cartons of 6 or 12 rolls. Each roll is individually packaged. This solution allows to guarantee the hygiene of the product.

The medical roll is resistant and comfortable thanks to its soft embossing and the two paper layers. The examination roll is perforated to make it easy to tear and reduce waste. The roll is useful to keep the couch clean and hygienic at all times and to preserve the patient's hygiene. The disposable couch roll is practical, non-toxic and ideal for doctor's surgeries, beauty centers, tattoo centers, physiotherapy studios, surgeries. Each roll is individually packed to protect the product, but also to increase hygiene and safety.

Our staff, who are specially trained and kept constantly up-to-date with the latest developments, produce special and automatic machines, production lines and industrial plants, automation and handling systems, prototypes and newly developed machines, material handling and automation systems, equipment and lines. The on-site engineering department at the Nole plant provides specialist consulting on the production of ad hoc industrial machines and systems, which are designed according to customer requirements using advanced 3D design software. Below are some examples of machinery produced : Equipment for the production of foam rubber Automatic cutting lines for rubber Industrial washing facilities Drying ovens Inspection machines Newspaper sorting plants Polymer tempering plants Rolling mills for pasta and kneading machines

The company specializes in belt conveyors and the handling of materials and parts of different kinds and types. We design and manufacture: Belt conveyors Screw conveyors Conveyors with metallic rolling shutters Wire mesh conveyors Chain conveyors Modular belt conveyors Motorized roller conveyors and roller conveyors Mechanical elevators Bucket elevators Loading machine with drawers Each of our machines is the result of careful analysis and design and is manufactured to meet all of the customer's criteria and requirements.