Results for
FERPLAST SNC
Italy
Sturdy and professional roll holder suitable for the unwinding of heavy plastic reels film made of polyethylene. Load 100 Kg. Very robust reel holder, made of painted tubular steel and equipped with wheels with brake, it supports rolls with a weight of up to 100 kg and allows an operator to carry them out safely. The reel holders are made with the reel axis diameter 60 mm and length up to 2200 mm, very simple to rotate as it is mounted on ball bearings and equipped with cones for locking the reels. Depending on the presence or absence of the brake, the total width of the roll holder is approximately 200/300 mm wider than the useful width. The reel holder axis can be "idle" or "with brake".
Request for a quoteFERPLAST SNC
Italy
TABLE MONOBLOC SEALER WITH MANUALLY OPERATED SEALING BAR AN INCORPORATED ROLL HOLDER The SP 600 is equipped with sealing bar with NI-CR wire for simultaneous cutting and welding of the film. Allows to obtain a polyethylene or polypropylene bag, perfectly welded and trimmed, using the normal fold film. Suitable for use in laundries, shirt factories, the textile sector in general, but is also suitable for the food sector for the packaging of the bread. Operation: Place the coil with the open side facing the operator Insert the open-film blade between the two flaps Unroll the film to the desired length Lower the sealing bar and cut the bag Enter the product in the bag and make the welding of the side remained open.
Request for a quoteFERPLAST SNC
Italy
High speed with PLC and Touch screen control panel The new FPWK 0430-TOUCH model represents a remarkable evolution compared to the previous models because it can use polypropylene band with a thickness from 60 my to 150 my and polythene paper band with a thickness from 100 to 130 my. The maximum speed is 30 cycles/min. The machine is equipped with a Schneider Touch screen control panel (simple and intuitive) with which all the functions of the machine can be easily checked with the exception of the tensioning which is adjustable via a separate potentiometer. The standard bench model uses 150 m spools. but the machine can be installed on a motorized reel holder for rolls of 500-1500 m. The FPWK 0430 banding machine in addition to the classic use in graphic arts, bookbinding, paper converting, is particularly suitable for the realization of multiple packs or for the combination of multiple products in promotional sales.
Request for a quoteFERPLAST SNC
Italy
MG 1020 SEALING MACHINE WITH CLOSING MAGNET Pulse sealers MG 1020 series, with 1020 mm sealing bar and suitable for sealing polyethylene, pvc and polypropylene bags. They have a special timer for adjusting the sealing time based on the thickness and type of material. The MG sealers are complete with a manual cutting unit for the trimming of the sealed bags and/or the creation of bags from tubular reels (if the machine is equipped with a roll holder). The sealing bars must be closed manually by the operator and are automatically held by a magnet until the end of the cycle. There are special supports with mechanical pedal, for the manual sealing machine and with electric pedal for the sealing machine with motorized bar closing. Available models: MG 1020: bench sealing machine with manual closing of the bars MGMI 1020: bench sealing machine with motorized closing of the bars and electric pedal
Request for a quoteFERPLAST SNC
Italy
Impulse sealers MG 820 series, with 820 mm sealing bar and suitable for sealing polyethylene, pvc and polypropylene bags. They have a special timer for adjusting the sealing time based on the thickness and type of material. The MG sealers are complete with a manual cutting unit for the trimming of the sealed bags and/or the creation of bags from tubular reels (if the machine is equipped with a roll holder). The sealers bars must be closed manually by the operator and are automatically held by a magnet until the end of the cycle. There are special supports with mechanical pedal, for the manual sealing machine and with electric pedal for the sealing machine with motorized bar closing. Available models: MG 820: bench sealing machine with manual closing of the bars MGMI 820: bench sealing machine with motorized bar closing and electric pedal
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
FERPLAST SNC
Italy
MG 421 SEALING MACHINE WITH CLOSING MAGNET Impulse sealers MG 421 series with 420 mm sealing bar and suitable for sealing polyethylene pvc and polypropylene bags. They have a special timer for adjusting the sealing time based on the thickness and type of material. The MG sealers are complete with a manual cutting unit for the trimming of the sealed bags and/or the creation of bags from tubular reels (if the machine is equipped with a roll holder). The sealing bars must be closed manually by the operator and are automatically held by a magnet until the end of the cycle. They can be equipped with special supports with mechanical pedal, for the manual sealing machine and with electric pedal for the sealing machine with motorized closing of the bars. The MG 421 series sealing machines are available with bars with mechanical or motorized closure with a sealing thickness of 3 or 5 mm depending on the model. There are also special models in stainless steel and with 2 parallel welds of 3 mm.
Request for a quoteFERPLAST SNC
Italy
MG 300 SEALING MACHINE WITH CLOSING MAGNET Impulse sealers MG 300 series, with 300 mm sealing bar and suitable for sealing polyethylene, pvc and polypropylene bags. They have a special timer for adjusting the sealing time based on the thickness and type of material. The MG sealers are complete with a manual cutting unit for the trimming of the sealed bags and/or the creation of bags from tubular reels (if the machine is equipped with a roll holder). The sealing bars must be closed manually by the operator and are automatically held by a magnet until the end of the cycle. There are special supports with mechanical pedal, for the manual sealing machine and with electric pedal for the sealing machine with motorized bar closing. Maximum weldable thickness 0.15 mm (0.30 tot). Available models: MG 300: bench sealing machine with manual closing of the bars MGM 300: bench sealing machine with motorized bar closing and electric pedal
Request for a quoteFERPLAST SNC
Italy
Simple and reliable, it uses paper and polypropylene tapes 29 mm wide and 150 meters long. in the standard version. The machine can be installed on a trolley with motorized reel-holder for rolls of 500-1000 meters. (max. diam. 360 mm). Maximum banding light mm. 450x200H. Speed up to 20 cycles per minute. The tension of the band is adjustable by means of a handwheel positioned inside the wheeled base. Manual or automatic operation with sensor. The FPWK 0230 banding machine in addition to the classic use in graphic arts, bookbinding, paper converting, is particularly suitable for the realization of multiple packs or for the combination of multiple products in promotional sales. Available in two models: FPWK0230B: standard bench version with adjustable strap tension via screw located inside the machine. FPWK0230P: version equipped with motorized reel holder with wheels. The strap tension can be adjusted by means of a handle located inside the machine.
Request for a quoteResults for
Roll-holder - Import exportNumber of results
9 ProductsCountries
Company type