Results for
FERPLAST SNC
Italy
Pneumatic stapler for staples Series S4, section 1.40 x 1.60 mm., width 9,3 mm., length from 20 to 63 mm. Uses: Assembling of furniture and cabinets, construction of frames for doors and windows, wood interior trim, cornices, waterproofing and insulating homes, hardwood floors, vinyl siding and aluminum, attack with springs in upholstery, production of wooden signs, drawers, backs of boxes, grids. Models available: S4.38 B - for staples up to 38 mm - bottom loading S4.50 - for staples up to 50 mm - standard S4.65 - for staples up to 65 mm - standard
Request for a quoteFERPLAST SNC
Italy
Pneumatic strapping tool with vibration welding (heating by friction) for straps in polyester PET width 25-32 mm and max. thickness mm. 1,27. Compact, handy, easy to use, is suitable for closing all kinds of flat packaging. Thanks to a very short base and the command of reverse rotation of the roller it may also strap round packing with a minimum diameter of mm. 700. The operator simply inserts the two overlapped strips into the strapping tool, press a button to make the tension, a second button to get the vibration welding, and at the end a third button to pull out the tensioning device effortlessly.
Request for a quoteFERPLAST SNC
Italy
Pneumatic strapping tool with vibration welding (heating by friction) for straps in polyester PET width 16-19 mm and max. thickness mm. 1,27. Compact, handy, easy to use, is suitable for closing all kinds of flat packaging. Thanks to a very short base and the command of reverse rotation of the roller it may also strap round packing with a minimum diameter of mm. 700. The operator simply inserts the two overlapped strips into the strapping tool, press a button to make the tension, a second button to get the vibration welding, and at the end a third button to pull out the tensioning device effortlessly.
Request for a quoteFERPLAST SNC
Italy
Pneumatic strapping tool with vibration welding (heating by friction) for straps in polypropylene PP and polyester PET width 13-16-19 mm and max. thickness mm. 1,27. Compact, handy, easy to use, is suitable for closing all kinds of flat packaging. Thanks to a very short base and the command of reverse rotation of the roller it may also strap round packing with a minimum diameter of mm. 700. The operator simply inserts the two overlapped strips into the strapping tool, press a button to make the tension, a second button to get the vibration welding, and at the end a third button to pull out the tensioning device effortlessly.
Request for a quoteFERPLAST SNC
Italy
Pneumatic strapping tool with vibration welding (heating by friction) for straps in polypropylene PP and polyester PET width 13-16-19 mm and max. thickness mm. 0.9. Compact, handy, easy to use, is suitable for closing all kinds of flat packaging. Thanks to a very short base and the command of reverse rotation of the roller it may also strap round packing with a minimum diameter of mm. 700. The operator simply inserts the two overlapped strips into the strapping tool, press a button to make the tension, a second button to get the vibration welding, and at the end a third button to pull out the tensioning device effortlessly.
Request for a quoteFERPLAST SNC
Italy
Pneumatic welder ST POLI WELDING with vibration welding (heating by friction) for PET polyester strap. Compact, handy, easy to use, is suitable for closing every kind of flat packaging. Moreover, thanks to the short base, you can strap round packages with a minimum diameter of mm. 500. The operator simply inserts the two overlapping strips into the strapping tool and press a button to perform the vibration welding. The welder is used in conjunction with a manual tensioner or for the packaging of parcels already pressed.
Request for a quoteFERPLAST SNC
Italy
PNEUMATIC CENTERING DEVICE WITH MOTORIZED ROLLERS (MOD. CP-FM) MANUFACTURERS VERSION Feeder - centering device useful for centering boxes max width mm. 650 and max weight kg. 50. Can be combined with automatic taping and labeling machines. The box centering machine mod. CP-FM consists of a motorized roller conveyor and two pneumatically operated side guides. The metal parts are painted with epoxy powder while the other components are galvanized. The pneumatic centering device with motorized rollers is a module for builders to be completed and adapted to an automatic line. It is available in two versions: Manufacturers version and "plug and play" version: In the "manufacturers" version, the centering device is supplied complete with: - Motorized roller conveyor with start and stop button and emergency mushroom, at a fixed speed of 15 meters / minute - Pneumatic tail lifts and compressed air system up to the gate movement management valve.
Request for a quoteFERPLAST SNC
Italy
The stapler SERIES MPK are designed for the closure of the sides of the cartons and the construction of trays and containers. Available in mechanical version (mod. M), pneumatic (model B) and stitched at 45° (K). These staplers are suitable if you need to prepare packages in different areas and in small quantities. When you need to close 50 to 100 packages it is advisable to use a pneumatic stapler. The models use MPK points series 16B coppery length 12,15,18 mm (charger 300 points). On request it is available the model that uses the series 35 points coppery length 15,18,22,24 mm, charger 200 points). The length of the arm varies from 340 mm to 1000 mm depending on the model.
Request for a quoteFERPLAST SNC
Italy
PNEUMATIC CLIPPER FOR GABIONS Large sturdy pneumatic clipper with ring closure, using clips of 45 mm. with wire diameter 3 mm. and can close up to a diameter of 15 mm (mm. 13 for model FPPS45P-13). Suitable for the assembly of the containment gabions in mesh, structures and fencing in wire mesh, fixing reinforcements for the building, sealing bags or mattresses that are used as retaining walls, sound barriers, dikes, road reinforcements, reinforcement of banks, horticulture, traps and rockfall protections.
Request for a quoteFERPLAST SNC
Italy
PNEUMATIC SEALER SM 40 P - PLASTIC BAND Pneumatic sealer Mod. MINI SM 40 P, robust and safe, built entirely in painted steel suitable for closing polythene bags with clipband (plastic with double metal core). Also available with engraved date or ink date. All parts in contact are made of AISI 304 stainless steel suitable for contact with food.
Request for a quoteFERPLAST SNC
Italy
PNEUMATIC SEALER SM 35/40A - WITH DATE PUNCHER Pneumatic sealer SM 35/40 A for closing bags in any material using an aluminum plate with a height of 5/7 mm. All parts in contact are made of AISI 304 stainless steel suitable for contact with food. The seal is obtained from a coil with high autonomy, cut to a length of 35/40 mm, wrapped around the neck of the bag and finally pressed to form a flat closure. Machine complete with date and a kit of numerical punches, practical, economical and safe.
Request for a quoteFERPLAST SNC
Italy
The pneumatic sealing machines QF 600/800 LS are widely used in chemical industries, food industries, animal feed, etc. for sealing bags in plastic material of every kind, even of high thickness with max width of 600/800 mm and weight max of 50 kg. The use of compressed air to the closing of the sealing bars allows to adjust the welding pressure and ensures a high and constant quality, the closure of the bars takes place through double button (dual control of security). The welding machines QF-600/800 LS are installed on a stand with wheels and comes complete with height-adjustable idle roller conveyor for handling bags weighing up to 50 kg.
Request for a quoteFERPLAST SNC
Italy
Pneumatic stapler for staples Series 92, section 1.00 x 1.25 mm., width 6,4 mm., length from 9 to 40 mm. Uses: Assembling of furniture and cabinets, construction of frames for doors and windows, wood interior trim, cornices, waterproofing and insulating homes, hardwood floors, vinyl siding and aluminum, attack with springs in upholstery, production of wooden signs, drawers, backs of boxes, grids.
Request for a quoteFERPLAST SNC
Italy
PNEUMATIC SEALER CP 500 Electropneumatic sealer with double sealing impulse bar with (the resistance heat for a few seconds) suitable for closing packaging polyethylene, PVC and polypropylene, coupled aluminum, etc. It has four positions of voltage to the sealing bar, timer for adjusting the welding time and timer for the cooling time. The double sealing bar (top and bottom) welded from 3 mm allows the closing of envelopes very thick, laminated bags and bellows. The closing of the bars takes place by a pneumatic cylinder unit with pressure and pedal control. Maximum thickness weldable 0.25 mm. The CP 500 can be easily oriented from 0 to 90 degrees.
Request for a quoteFERPLAST SNC
Italy
Wrapping machine constituted by tubular structure on which it is possible to hang the garment already pre-packaged in the upper part. The machine is equipped with sealing bar air that allows the lower welding of the hanging clothing. Sealing width 80 cm. with pneumatic closure bar. Built-in pressure regulator. The sealing is made by pneumatic closing of the bar. You can also change the height of welding in a practical and fast by pneumatic control. In the standard version the adjustment ranges of about 50 cm. On request it is possible to change the height of the weld. Operation: The operator hangs the dress already bagged the top and insert the edges of the bags in the sealing bars. Through the dedicated command adjusts the height of the sealing bar and closes. Operand button welding makes the closure of the envelope. The sealing cycle is indicated by a warning light and can be adjusted up to about 1.
Request for a quoteFERPLAST SNC
Italy
Pneumatic tensioner model FP CORD for tensioning and cutting of polyester strap textile and composite. Equipped with high tension force (7500 N) allows the use of strap widths up to 32 mm. By acting on the supply pressure it is possible to adjust the tension. The built-in knife allows cutting the strap easily and without waste of material. The holding capacity of strap depends on material type to strap and on strap choice.
Request for a quoteFERPLAST SNC
Italy
Pneumatic strapping tool with vibration welding XQD 19 for polyester strap PET, compact, handy and easy to use. The high traction force (2770 N max) and the short supporting base enable its use in every industrial sector for the closure of flat and round packages (with a minimum diameter of mm. 500). The operator simply inserts the two overlapped strips into the strapping tool, press a button to make the tension, a second button to get the vibration welding, and at the end a third button to pull out the tensioning device effortlessly.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
FERPLAST SNC
Italy
Semi-automatic sealless steel strapping tool, with pneumatic tensioning and manual sealing of the strap. It requires a flat support surface with a minimum length of 200 mm. For use with glossy or blue strap from mm. 13 to mm. 19 with a maximum thickness of 0.60 mm. The holding capacity of strap dipends on material type to strap and on strap choice.
Request for a quoteFERPLAST SNC
Italy
PNEUMATIC TURNING DEVICE WITH FREE ROLLERS 90F MODEL. DIVERT BOXES BY 90°. Pneumatic turning device with free rollers conveyor, complete of stop barrier including sensor and pneumatic pusher with cylinder of 50 mm for expulsion of boxes at 90°. The metal structure is painted while the other components is provided with galvanized finish. The pneumatic pusher is activated by a box hitting the stop barrier, changing its direction of 90°. Usually it used in cascading lines.
Request for a quoteFERPLAST SNC
Italy
JUMBO pneumatic stapler model for cardboard boxes with double and triple wave with thickness up to 25 mm. It use coppery staples type 32J width mm. 32 x length mm. 25-28-32-35-38, packs of 1000 pieces.
Request for a quoteFERPLAST SNC
Italy
The pneumatic stapler ROLL is employed for the sealing the top part of cardboard boxes. It is provided with a coil magazine. The number of staples the fastener can contain is therefore quite high (1,000 for coil) and work can be accomplished in a faster way. They are equipped with the stitch depth adjustment and use points with width mm. 35 and depth mm. 15-19-22. The stapler use AR1 type staples only, characterised by their inclined shape. The tool is available in three versions in order to be able to seal cartons of any width.
Request for a quoteFERPLAST SNC
Italy
AIR BOXER pneumatic stapler for fast and efficient stitching. Used mainly for the closure of the upper part of the boxes. Pneumatic stapler models available in 5/8 - 3/4 - 7/8, for staples auburn mm. 35/15 - 35/19 - 35/22 in the finger. Equipped with a device for adjusting the depth of the stitching.
Request for a quoteFERPLAST SNC
Italy
Pneumatic stapler for to sealing the top part of cardboard boxes. Available in 3 models for staples 35 mm. width and 15 - 19 - 22 mm lengths (1 single tool for each type of staple). It is possible to adjust the staple closure depth. Extremely solid for intensive work.
Request for a quoteFERPLAST SNC
Italy
Pneumatic stapler for to sealing the top part of cardboard boxes. Body made of special aluminium alloy and regulation of different anvil penetration and clinching. Light and handy. With a simple adjustment the stapler is employable with staples 35 mm width and 15 - 19 mm lengths (1 single tool for two type of staples).
Request for a quoteFERPLAST SNC
Italy
PPF SERIES: PNEUMATIC FILLERS FOR CREAMS AND SAUCES STAINLESS STEEL AISI 304 - easy washable Volumetric dosing with pneumatic operation series PPF for the dosing of sauces and creams. Stainless steel AISI 304 construction with column for floor installation and adjustable support. Easy use and cleaning idael for small workshops and frequent variations in production. Designed for dispensing food products, chemicals, cosmetics, pharmaceuticals, etc. Available in five models with capacity max. 250 ml. - 500 ml. - 1000 ml. - 2000 ml - 5000 ml. The internal volume of the hopper is approximately 25-30 liters depending on the model. The dispenser is equipped with an adjustable work surface with a maximum height of mm. 500. To obtain a suitable working height to maintain a correct position during the dosage it is advisable to purchase the stainless steel support with feet.
Request for a quoteFERPLAST SNC
Italy
PNEUMATIC CLIPPING MACHINE WITH RING LOCK HR24TC PN Pneumatic clipper with ring closure for the assembly of mesh cages, springs for mattresses, fences and packaging. Light and handy. It uses clips type HR24 with width mm 24, height mm 12 and wire diameter mm 1,8
Request for a quoteFERPLAST SNC
Italy
Clipping machines HR20/23 with ring closure for the assembly of wire mesh, springs for mattresses, fencing and packaging. Aluminium body, rubber grip and return of pneumatic gripper (without spring). The closure diameter of the of the ring depends on the type of material to be clipped. The clipping machine HR 20 and HR 23 are suitable for example for fences and to close bags and nets. The sealing of the clipping depends essentially on the type of material that is going to seal. On soft materials, such as on a net bag, the clip remains locked. On stiffer materials or on fences, the clip guarantees tightness but may not prevent the wire from sliding.
Request for a quoteFERPLAST SNC
Italy
Clipping machine FS CL 11-20 with ring closure for the assembly of wire mesh, springs for mattresses, fencing and packaging. Aluminium body, rubber grip, return of pneumatic gripper (without spring).
Request for a quoteFERPLAST SNC
Italy
MINI TWIST 140-160 CABLE - SEALING MACHINES WITH TWIST BAND Twisting manual machine, designed and built to tie different kinds of product, with a twistband wire. It is mode in varnished steel assuring a long life. The MINI TWIST is user-friendly and astonishes for its simplicity. It makes possible a grow of productivity of the worker himself. The machine is feeded by a reel of plastic wire, so-called "Twist band" which has a metal wire inside.
Request for a quoteResults for
Pneumatics - Import exportNumber of results
51 ProductsCountries
Company type
Category