Machinery and equipment - Import export

PNEUMATIC CLIPPING MACHINE WITH RING LOCK HR24TC PN Pneumatic clipper with ring closure for the assembly of mesh cages, springs for mattresses, fences and packaging. Light and handy. It uses clips type HR24 with width mm 24, height mm 12 and wire diameter mm 1,8

HORIZONTAL DOUBLE CUTTERS BD 122 - BD 220 Universal cutters for cutting paper, corrugated cardboard, reinforced papers and polythene, polyethylene foil, polyethylene bubble, polyethylene foam. This series is very useful because you can use at the same time two different materials. The use of the cutter is extremely simple: it is necessary to carry the material to the desired length and manually operate the blade holding carriage, the cut is clean and precise in both directions. All the cutters are mounted on a frame complete with coil holder and rubber feet, on request may have the wheels with brake. For reasons of space the product is shipped disassembled. The cutter can be equipped with: RHOMBOIDAL BLADES: suitable for cutting plastic film, polyethylene foil, bubble wrap or foam. CIRCULAR BLADES: suitable for cutting paper, corrugated paper and reinforced.

Pneumatic tensioner model FP CORD for tensioning and cutting of polyester strap textile and composite. Equipped with high tension force (7500 N) allows the use of strap widths up to 32 mm. By acting on the supply pressure it is possible to adjust the tension. The built-in knife allows cutting the strap easily and without waste of material. The holding capacity of strap depends on material type to strap and on strap choice.

Pneumatic tensioner model FP LASH very powerful and easy to handle, suitable for all working conditions, guarantees a high tensile strength and it is suitable for securing bulky and heavy loads on trucks, containers, ships, etc. The high tension force (7500 N) allows the use of textile strap with width up to 50 mm. It is also possible to adjust the tension acting on the supply pressure. The holding capacity of strap depends on material type and on strap of choice.

Semiautomatic mobile strapping machine for the strapping of pallets, complete with a channel for inserting the strap. New compact model with closed body and internal reel holder. Hinged raceway equipped with double roll to facilitate the insertion of the strap into the base of the pallet. Strapping sling channel with containment flaps (avoiding the exit of the strap). Electronic voltage regulation via potentiometer. Electronic regulation of the strap throw length. Safety function with acoustic alarm and tension delay (when the operator inserts the strap he has time to remove the hand).

The fully automatic strapping machine mod. TP 201 with side sealing is particularly suitable for strapping furniture, household appliances, palletised loads and high packages. It can be inserted in lines where the available space or the limited height of the conveyor do not allow the use of a standard strapping machine. The strap is automatically launched, tensioned, welded and cut, speeding up the strapping operations. The strapping machine, suitably modified, can be easily inserted into automatic packaging lines and can also work without an operator.

The semi-automatic strapping machines are ideal for tying boxes, packages, bundles, etc. in warehouses, workshops, supermarkets and anywhere there safe packing is needed. The plastic strap helps to reinforce the packaging and ensure ligation. The printed strap is also available. If placed around the packaging, the strap is a valuable burglar resistant tool, if the package is opened it can not be closed with the same type of strap

The semi-automatic strapping machines are ideal for tying boxes, packages, bundles, etc. in warehouses, workshops, supermarkets and anywhere there safe packing is needed. The plastic strap helps to reinforce the packaging and ensure ligation. The printed strap is also available. If placed around the packaging, the strap is a valuable burglar resistant tool, if the package is opened it can not be closed with the same type of strap. The model FP8022 allows to strap the product with minimum size of 60x60x10 mm and it uses strap with width 6-9-12 mm and with max thickness of 0,6 mm.

This kit is the easiest and most economical kit for strapping and is used especially when you do not need a battery tensioning device or larger coils. This kit is suitable for strapping of pallets up to 800 kg, considering putting two straps for each pallet. The holding capacity of strap dipends on material type and on strap choice.

The most common manual strapping tool for plastic straps. Practical and economical, it is particularly suitable for polypropylene strap with width 12 mm and thickness max mm. 0.8. The closure is done with a metallic tooled seal to increase tightness. Upon request, you can use it in fruit and vegetable sector equipping it with a hook for boxes and containers (optional).

The cushioning machine AIR BAG FP 600 G is compact and silent and allows you to create air cushions for packaging. It is suitable for use in the food, pharmaceutical, farm and wine industries and wherever it is necessary to pack fragile products such as glass jars, bottles and fragile products.

Idler roller conveyors made of a sturdy structure in painted steel, supports with adjustable and height-adjustable feet, galvanized steel rollers with rotation on shielded ball bearings. In this position a convenient and economic box holder has been installed and allows the operator to lock and fill the box in comfort. Once the filling is complete, the operator can detach the box by simply pushing it forward.

The proposed semi-automatic line includes a GEM 52 taping machine for boxes with side drive belts. Before the taping machine, a PACK POINT 08 box former was positioned, which makes it faster and easier to form and fill the boxes. Once the boxes have been filled, it is possible to advance them towards the taping line by pressing the appropriate button on the former.

Semi-automatic line consisting of taping machine FP9036 with side straps (or FP9037 with straps above and below) for closing the upper and lower flap of the box and special plan for loading products. To facilitate the packaging operation of the products, an idle conveyor roller with boxes-stopper plan has been positioned before the taping machine. In this way it is possible to block and fill securely, quickly and easily the box not yet taped simply taking the products from a plan or from an adjacent container. Then, with a simple push, the operator will move the box in the taping machine.

The idle roller with boxes-stopper plan allows the operator to "lock" the box still to be closed and make the filling operations. Depending on customer requirements can be matched more filling stations. For safer packaging, especially of fragile goods such as glasses, bottles and cosmetics, it is also possible to place beside the operator a machine to create air cushions.

Combining the erector to a line (taping base, filling floor and taping machine) it is possible to create the boxes as they need, without engaging spaces for accumulation. The trainer will automatically form boxes, taking them from the side stock and by bending the four bottom flaps. The settings relating to boxes, speed size etc .. are all adjustable by a convenient front panel. The operation can be set automatically or manually. Furthermore, by installing the automatic Start/Stop system equipped with a photocell, placed on the taping base, the F2000 trainer waits for the operator to free the taping base from the box, before proceeding with the formation of another box.

The F1000 carton erector is used when a large number of boxes of the same size are to be formed. With the erector it is possible to form the boxes and accumulate them in a specific area of ​​the warehouse, ready for use. By combining the erector with a line (taping base, filling surface and taping machine) it is possible to create the boxes as they are needed, without taking up space for accumulation. The erector automatically forms the boxes by taking them from the side magazine and folding the four lower flaps. The settings regarding box size, speed, etc. are all settable via a convenient front panel. Operation can be set automatically or manually. Furthermore, by installing the automatic Start/Stop system equipped with a photocell, placed on the taping base, the F1000 trainer waits for the operator to free the taping base from the box, before proceeding with the formation of another box.

BASE CARTON SEALER B52/B670/B820 Base for the closure of only the funds of boxes by means self-adhesive tape. Structure of the machine body made of sheet steel bent, bolted and painted, the movement of the cartons is done by two side drive belts driven by a single motor, adjustments for the different formats are made through flywheels. The machine is equipped with 4 wheels with brakes. The taping bases can be used both in semi-automatic lines with operator and in automatic lines or with box formers. The GEM B52 model is available in the version without guards for semi-automatic use or with side guards for insertion in the line. On the other hand, the B670F and B820F versions are only available with side protections for use in automatic lines or in combination with an automatic box former. The GEM B52 models can also be made of stainless steel.

CARTON SEALER MACHINE MOD. GEM 350 - GEM 360 - GEM 380 WITH ADJUSTABLE FORMAT AND WITH UPPER AND LOWER DRIVE BELTS. The two heads simultaneously apply a strip of tape taping above and below the box. Ideal for close boxes high and narrow. Structure of the machine body made of sheet steel bent, bolted and painted, the movement of the cartons is done by four drive belts flat, two lower and two upper, driven by a single motor, adjustments for the different formats are made through flywheels. The box has to get on the work surface with the top flaps closed. The machine is equipped with 4 wheels with brakes.

CARTON SEALER MACHINE MOD. GEM 350 / GEM 360 / GEM 820 WITH ADJUSTABLE FORMAT AND WITH UPPER AND LOWER DRIVE BELTS The two heads simultaneously apply a strip of tape taping above and below the box. Ideal for close boxes high and narrow. Ideal for fixed format boxes close (with constant height and width). Structure of the machine body made of sheet steel bent, bolted and painted. The movement of the cartons is done by two side drive belts driven by a single motor, adjustments for the different formats are made through flywheels. The machine is equipped with 4 wheels with brakes.

CARTON SEALER MACHINE MOD. FP 9070 - DOUBLE DRIVE SYSTEM CONSISTS OF TWO LOWER SIDE BELTS AND TWO UPPER BELTS. Machine suitable for large boxes, the double drive system ensures a regular feed even in presence of high and light boxes. The two heads simultaneously apply a strip of tape taping above and below the box. Ideal for close fixed format boxes (with constant height and width). Structure of the body in painted steel. Movement of boxes happens via two lower dive belts and two upper drive belts, adjustments for the different formats are carried out using flywheels. The machine is equipped with idle rollers 400 mm length for loading and unloading. The machine is equipped with wheels with brake.

CARTON SEALER MACHINE MOD. FP 9037 - UPPER AND LOWER BELTS The two heads simultaneously apply a strip of tape taping above and below the box. Ideal for close fixed format boxes (with constant height and width). Structure of the body in painted steel. Movement of boxes happens via two lower dive belts and two upper drive belts, adjustments for the different formats are carried out using flywheels. The machine is equipped with idle rollers 400 mm length for loading and unloading. The machine is equipped with wheels with brake.

TAPING MACHINE MOD. FP 9036 WITH MANUAL ADJUSTMENT AND 2 LATERAL DRIVE BELTS The taping machines series FP9036 and FP9037 are used in semiautomatic lines for the quick and safe closure of boxes using adhesive tape. The two taping heads simultaneously apply a strip of tape above and below the box. Depending on the size of the boxes (height and width), the operator must adjust the taping machine using handy handwheels. In the FP9036 model the structure of the machine body is in painted steel sheet and the cartons are dragged through 2 side drive belts. The machine is complete with 2 idle roller conveyors attached to the taping machine with length mm. 400 (for loading and unloading). It is equipped with wheels with brakes.

MINI TWIST 140-160 CABLE - SEALING MACHINES WITH TWIST BAND Twisting manual machine, designed and built to tie different kinds of product, with a twistband wire. It is mode in varnished steel assuring a long life. The MINI TWIST is user-friendly and astonishes for its simplicity. It makes possible a grow of productivity of the worker himself. The machine is feeded by a reel of plastic wire, so-called "Twist band" which has a metal wire inside.

New cordless stapler powered by lithium-ion battery. Excellent for jobs requiring freedom of movement. The battery offers high performance (7.2V) and is characterized by very rapid charging. The high quality construction ensures a long life to the instrument and is perfect for everyday use in case of fixing of paddings, textile materials, leather or thin wood. It has a safety system to prevents accidental shots and a "see-through" indicator for an efficient charging. The long duration power supply system (1300 shots), without constraints of pipes or cables makes it extremely versatile, practical and suitable for anyfixing work. Dual magazine for staples and nails. Ergonomic design with "soft grip" handle and prefect balance. The stapler Rapid BTX530 uses staples series 53 length from 6-8-10-12-14 mm, with total width of 11,40 mm and brads series 8 of length 15 mm.

Professional manual tackers Rocama 10/20 with body made of aluminum alloy. Loading dock below. Ideal for fixing labels on packaging and protective materials in wood, for assembly of frames and frames for decoration work, to set wallpaper, baseboards and wood profiles, for exhibitions stands, furniture stores, interiors of homes, caravans, campers and coatings of sofas and furniture. Equipped with power regulator. Available in two models: Rocama 10 for staples series AP with length of 5-8-10 mm, with total width 10 mm, section 0,45x0,90 mm. Rocama 20 for staples series AP with length of 10-12-14-16-20 mm, with total width 10 mm, section 0,45x0,90 mm, brads series FAST M of 20 mm and pin series FAST W of 20 mm, section 1,00x1,25.

Steel stapler hammer, with its practical handle is ideal for fixing labels on wooden boxes, to secure your notices, posters, upholsteries and ceilings. Perfectly balanced, it allows mounting in hard to reach places. This model is compatible with staples serie 13 with lenght of 4-6 mm, total width of 10,65 mm, section 0,50x0,75 mm.

Powerful stapler made of high quality steel for staples with length of up to 14 mm. Suitable for intensive use on fabrics, heavy fabrics, leather, etc. power regulation equipped in 3 levels which allows to simply and rapidly increase power when required. Specially designed to reduce the effort of the arm and the fatigue even after several hours of work. This model is compatible with staples series 13 with lenght of 6-8-10-14 mm, total width of 10,65 mm, section 0,50x0,75 mm.

Stapler built entirely of chromed steel, shot without backlash, suitable for fixing of textiles, paper, plastic and other lightweight materials on the hardwood. Charging from below. This model is compatible with staples series 13 with lenght of 4-6-8 mm, total width of 10,65 mm, section 0,50x0,75 mm.