Treatment - Import export

M.E.G.A.’s forging and heattreatment division is capable of forging fittings (in a closed die) up to 4” 16 kg. The heat treatment furnaces and tanks are all certified to Norsok M650 and ASTM A991 standards and can treat any product that M.E.G.A. produces (large and small forgings, pipes and any other type of part).

KOVER increases the resistance of plants to the sudden lowering of temperature (frost), and to the excesses of summer heat that cause water loss and dehydration (summer evapotranspiration). This product is able to increase the concentration of specific elements that have a recognized anti-stress action on the inside of the plant, and it promotes the formation of a gas-permeable film (antiperspirant) that is able to reduce water loss through the leaves. In addition, KOVER also contains the polysaccharides that makes the plants able to survive in extreme dehydration conditions.

Mitadaf is an innovative dissolved air flotation system. Its exceptional solid/liquid separation and/or sludge thickening efficiency is the result of the combined systemof uniform hydrodynamics and filtration with a bed of micro air-bubbles: an equipment of new concept developed by MITA. The heart of the mitadaf system is the multifunctional central column, by means of which the raw sewage is introduced into the tank, the clarified effluent water is recovered and the sludge exits. The raw influent water, suitably saturated with air, is introduced into the flotation tank via a series of holes located in the lower part of the central column. The entering mix, propelled by the micro-bubbles of air, immediately reaches the surface, homogeneously distributed across the whole flotation area (uniform hydrodynamic system).

Biodisc bio-oxidation system. Compact and modular solution, minimum energy consumption. B290 is the series of the largest units, used for plants of significant size. The transport of these rotating contactors is of the special category, but still at acceptable costs (it does non necessitate police escort). Typical applications: medium-sized communities and large factories. -Compactness and adaptability of the installations thanks to the limited dimensions -Modular installation, which allows subsequent plant expansion -Simplicity of plant management and maintenance: no need for specialist personnel -Low energy consumption, with consequent reduction of operating costs

The air handling unit (AHU) is a small piece of equipment for the simple treatment of air in small environments. It is usually composed of a single chilled water and hot water heat exchange coil, both for cooling and heating, or of a direct expansion coil in which the refrigerant gas circulates. Evaporation takes place in the coil itself within the rooms of use by an air filter and a low head suction/delivery fan. For this sector, our company deals with the production and sale of copper and iron pipes which can be semi-finished or assembled suitable for different purposes, including: Air exchange, Air purification, Humidity control

Biodisc bio-oxidation system. Compact and modular solution, minimum energy consumption. This is the latest entry to the single-piece unit series. The tank is made from treated and painted carbon steel, the cover in fibreglass-reinforced polyester. It associates the advantages of a single-piece unit (simplicity of installation, limited civil engineering works) with the possibility of application in installations already of a considerable size. The transport of these single-piece units is of the special category, but still at acceptable costs (it does not need a police escort). Typical applications: small to medium-sized communities various types of industry -Compactness and adaptability of the installations thanks to the limited dimensions -Modular installation, which allows subsequent plant expansion -Simplicity of plant management and maintenance: no need for specialist personnel -Low energy consumption, with consequent reduction of operating costs

The flow of oil and water is introduced to the tank and distributed in a homogeneous way across the whole cross-section. They are composed of a containment tank which can be manufacturedfrom treated and painted carbon steel or AISI 304 stainless steel; lamellar pack with parallel channels in rigid polystyrene, stabilized agains UV radiation. Special materials and executions are available on request. Typical applications: first fall rain water, petrochemical plants, mechanical workshops, refineries and depots of hydrocarbons, washing of vehicles, land reclaim, refuse handling centres. -High solid-liquid separation efficiency -Simplicity of installation and operation -Compact execution -Low first costs and plant management costs

The flow of oil and water is introduced to the tank and distributed in a homogeneous way across the whole cross-section. They are composed of just the parallel channel lamellar pack in rigid polystyrene, stabilized against UV radiation, closed in an AISI 304 containment frame; they are normally employed for housing in concrete tanks specifically built for the purpose of holding lamellar packs. Features Available height: 0,85 m Available widths: from 0,60 m to 2,20 m Available lengths: from 1,00 m to 3,00 m -High solid-liquid separation efficiency -Simplicity of installation and operation -Compact execution -Low first costs and plant management costs

The flow of water and sludge coming from the previous phases of treatment (whether biological or physical-chemical) is introduced into the intermediate zone of the tank, just below the lamellar pack. Lamellar pack single-piece clarifiers for the sludge settling. They are composed of: containment tank which can be manufactured from, at choice, treated and paintedcarbon steel or in AISI 304 stainless steel; lamellar pack with parallel channels in rigid polystyrene, stabilized against UV radiation; surface discharge trough (with weir) in AISI 304; intermediate distributor of the feed flow. Special materials and executions are available on request. FM – L SERIES (11,30 m2/m3 equivalent surface) Typical applications: secondary clarification of biological sludge, drinking water plants, upgrading of existing clarifiers, rain water treatment. -High solid-liquid separation efficiency -Simplicity of installation and operation -Compact execution -Low first costs and plant management costs

The flow of water and sludge coming from the previous phases of treatment (whether biological or physical-chemical) is introduced into the intermediate zone of the tank, just below the lamellar pack. Lamellar packs with frame for sludge removal. They are composed of the parallel channel lamellar pack in rigid polystyrene, stabilized against UV radiation, closedin an AISI 304 containment frame; they are normally employed for the upgrading of existing clarifiers or for housing in concrete tanks specifically built for the purpose of holding lamellar packs. F – L SERIES (equivalent surface 11,30 m2/m3) F – I SERIES (equivalent surface 14,90 m2/m3) F – S SERIES (equivalent surface 20,00 m2/m3) -High solid-liquid separation efficiency -Simplicity of installation and operation -Compact execution -Low first costs and plant management costs

The advantages of cloth filters and biorulli in a compact system for small community water treatment. Compact system for the biological purification treatment with biodiscs combined with cloth filter for the separation of excess sludge. The biocombi compact system features two treatment phases (biological treatment and separation of excess sludge) gathered in a single tank. The standard model provides the complete provision of a carbon steel tank treated and painted with a fiberglass modular cover easily removable, and an electrical switchboard on the machine with IP 55 protection. The moving parts (disc roller and drum filter) are actuated by a single geared motor with power included between 1,10 and 1,50 kW. -Minimum energy consumption -Reduced maintenance -Easy accessibility -Increased floor space (compact construction)

The advantages of cloth filters and biorulli in a compact system for small community water treatment. Compact system for the biological purification treatment with biodiscs combined with cloth filter for the separation of excess sludge. The biocombi compact system features two treatment phases (biological treatment and separation of excess sludge) gathered in a single tank. The standard model provides the complete provision of a carbon steel tank treated and painted with a fiberglass modular cover easily removable, and an electrical switchboard on the machine with IP 55 protection. The moving parts (disc roller and drum filter) are actuated by a single geared motor with power included between 0,75 and 1,10 kW. -Minimum energy consumption -Reduced maintenance -Easy accessibility -Increased floor space (compact construction)

Biodisc bio-oxidation system. Compact and modular solution, minimum energy consumption. B240 is one of the most recent series, designed to optimise the experiences acquired with the other types. It offers a range of medium to high active surfaces whilst being of limited size which facilitates their handling and installation. The series is already favoured in various installations, both civil and industrial. -Compactness and adaptability of the installations thanks to the limited dimensions -Modular installation, which allows subsequent plant expansion -Simplicity of plant management and maintenance: no need for specialist personnel -Low energy consumption, with consequent reduction of operating costs

Biodisc bio-oxidation system. Compact and modular solution, minimum energy consumption. B200 is the most used series, considering that it was the first to be launched and manufactured 40 years ago. It covers the size of plant in which the advantages of the biorulli® system are most evident. Typical applications: from small to medium-sized communities with seasonal variations in the number of inhabitants. -Compactness and adaptability of the installations thanks to the limited dimensions -Modular installation, which allows subsequent plant expansion -Simplicity of plant management and maintenance: no need for specialist personnel -Low energy consumption, with consequent reduction of operating costs

Biodisc bio-oxidation system. Compact and modular solution, minimum energy consumption. This is the most widely used single-piece unit series. The tank can be made, at choice, in treated and painted carbon steel or in AISI 304 stainless steel. The cover, in both cases, is manufactured in fibreglass-reinforced polyester. It is noteworthy for the ease of installation (limited civil engineering works, factory-assembled unit). Typical applications: hotel villages small communities various types of industry -Compactness and adaptability of the installations thanks to the limited dimensions -Modular installation, which allows subsequent plant expansion -Simplicity of plant management and maintenance: no need for specialist personnel -Low energy consumption, with consequent reduction of operating costs

Biodisc bio-oxidation system. Compact and modular solution, minimum energy consumption. M115 is the smallest single-piece unit series. It involves a set of rotating discs complete with tank and cover, both manufactured from fibreglass-reinforced polyester. It is an economical version, easy to install. Typical applications: apartment blocks villas small campsites factory premises -Compactness and adaptability of the installations thanks to the limited dimensions -Modular installation, which allows subsequent plant expansion -Simplicity of plant management and maintenance: no need for specialist personnel -Low energy consumption, with consequent reduction of operating costs

The best solution for tertiary filtration: high solid removal yields, minimum water and energy consumption. The tertiary filtration is strongly influenced by the hydraulic profile of the plant, which often cannot be changed. In the PECV VM (VM = metal tank) disc filters series the collection shaft is placed vertically. The goal is to feed equipment completely submerged even with very low hydraulic profiles. Even for this series, cloth washing is done with pumps, each of which is served by two or more discs. The pumps are actuated in sequence in order not to disrupt the functionality of the system. The PECV VM solution is ideal for small-medium unattended systems with heavy and extremely variable loads. The largest model of this series can process a load equal to a community of approximately 10.000 PE. The various models can be installed in parallel to obtain various working capacities. - Gravity filtration with limited head loss.

The best solution for tertiary filtration: high solid removal yields, minimum water and energy consumption. In the PEC – PEC VM (VM = metal tank) series, cloth washing is done with pumps, each of which is served by two or more discs. The pumps are actuated in sequence in order not to disrupt the functionality of the system. The PEC – PEC MT solution is ideal for small-medium unattended systems with heavy and extremely variable loads. The largest model of this series can process a load equal to a community of approximately 20.000 PE. The various models can be installed in parallel to obtain various working capacities. - Gravity filtration with limited head loss. - Continuous filtration without standby units for the backwash phases. - Cloth filter in polstoff free fibre provided with high mechanical strength. - High filtration rate (concentrations of TSS < 5 mg/l at discharge).

The best solution for tertiary filtration: high solid removal yields, minimum water and energy consumption. In the TF – TV VM (VM = metal tank) series the cloth support is made of a perforated metal sheet drum. This model is used for wastewater treatment plants of small working capacity (up to 2.000 PE) or as a secondary treatment downstream from immobilized biomass systems. It is available for installation in concrete tanks or metal tanks versions. The equipment is supplied with an electrical switchboard. - Gravity filtration with limited head loss. - Continuous filtration without standby units for the backwash phases. - Cloth filter in polstoff free fibre provided with high mechanical strength. - High filtration rate (concentrations of TSS < 5 mg/l at discharge).

Complete solutions specifically studied and designed for a more efficient and automatic management of evaporative cooling towers and industrial coolers. Some advantages of integrated cooling systems. - Program and modulate the progress of the machine during its use. - Optimize electricity consumption and water treatment. - Dosage and salinity control. - Water collection. - Remote monitoring and predictive maintenance possibility.

The standard model is made with wetted parts manufactured in AISI 304, the support legs in treated and painted carbon steel, filter element of quartz sand of suitable grain size. Special executions and alternative materials are available on request. Typical applications: tertiary treatment of civil and industrial waste water, surface water clarification, treatment of drinking water, primary filtration of civil and industrial waste water, clarification of metallurgical industry cooling water, algae removal, pre-treatment for ultra-filtration membrane installations, pre-treatment for ozonisation plants, finishing treatment with active carbon. - Low first costs and plant management costs - High efficiency and reliability for the removal of suspended solids, even colloidal - Exclusive backwash system which uses raw water rather then filtered water - External sand recirculation system - Ease of installation Possibility of gravity feed, thanks to its low pressure drops

A convenient and reliable technology of separation for treatments of surface water, conditioning and sterilization, civil and industrial sewage.

Gas Nitriding – Surface treatment Quench Hardening / Tempering – Heat cooling process treatment.

Heat treatment OPERATING TEMPERATURE: MAX 1200°C Standard power, size and shape or as indicated by the customer. Complete electrical BOXES with CONTROL and SAFETY systems (thermocouples). Stainless steel casing. Room insulation with technical material REFRACTORY and FIBROCERAMIC. Heating by resistive filament* SPIRAL. VIDEO: LINK

The water to be filtered enters via the inlet connector tangentially to the cylindrical body, it falls on the acceleration cone and increases more and more speed - The centrifugal force that is created by separating 'water the suspended solids with higher specific weight . A separation occurred the filtered water is conveyed into the outlet manifolds, while the impurities descend into the collecting tank where, special deflectors shall reset the speed preventing the ascent. The contaminant is removed drenandolo continuously or in time through the discharge valve. Uses: • For the protection of installations in which circulates industrial or domestic water. • For the protection of closed or open circuits of hot and cold water, cooling systems (in particular of the spray nozzles and the evaporating bodies). • For protection of the gland, the labyrinth seals and clutch rings Carbon mechanical seals for pumps and turbines.

Packaging paper with food paraffin treatment and food wrapping papers. Waxed paper is suitable for foodstuff, mainly for wrapping fish, meat and chocolate bars, thanks to its property of wet and grease resistance, so particularly suitable for direct contact with cheeses, butter and to wrap chocolate bars and oily food. Waxed paper preserves food as it is resistant to water, oils and greases. We produce various kinds of waxed paper (food paraffin laminated papers): available in different weights depending on customer use (supermarkets, fishmongers, butchers, deli and gourmet restaurants). We can provide custom formats and print in multiple colors.