System it - Import export

PNEUMATIC TURNING DEVICE WITH FREE ROLLERS 90F MODEL. DIVERT BOXES BY 90°. Pneumatic turning device with free rollers conveyor, complete of stop barrier including sensor and pneumatic pusher with cylinder of 50 mm for expulsion of boxes at 90°. The metal structure is painted while the other components is provided with galvanized finish. The pneumatic pusher is activated by a box hitting the stop barrier, changing its direction of 90°. Usually it used in cascading lines.

MOTORIZED ROLLER DIAMETER MM. 60 PITCH MM. 80 FOR HANDLING PALLETS We realize motorized rollers conveyors with diameter mm. 60 and pitch mm. 80. They consist of a sturdy frame in painted steel and supports with fixable feet, adjustable height. The high-quality rollers are made of galvanized steel with rotation on shielded ball bearings and complete with pinions or sprockets. The transmission is a chain loops or tangential chain. The geared motors groups have suitable power with start/stop switches or photocells control. Normally the rollers have an useful width of mm. 800-1000-1200-1500 and module length of modules mm. 2000-3000. Ideal solution when handling pallets, containers with reduced base and standard pallets with cross feed.

IDLE ROLLER CONVEYORS EXTENSIBLE WITH METAL ROLLERS Roller conveyors extensible with metal rollers for handling boxes, cassettes and packages with a flat base. They are normally positioned at the outlet of packaging machines and taping machines for the accumulation of packages and allow to realize different forms of route with curves up to 180 ° (depends on the length of the roller conveyor). The roller conveyors are equipped with supports with wheels with brakes and they are easily extendable and resealable, they can thus be moved and stretched, taking up very little space when not used. The movement of the boxes occurs by gravity and the box stopper terminal (included) avoid the fall. The roller conveyors with width mm. 800 are equipped with central pantograph to make the structure more robust. Standard supports are adjustable in height from mm. 650 to mm. 900 but on request you can have supports with height mm. 450-650 (same cost) or mm. 950-1250 with increase.

It can be realized in economic manner and with reduced overall dimensions with roller conveyors curves up to 180 °. This type of roller conveyors are an economical solution to the problem of handling boxes and packs along 90 ° or 180 ° paths, avoiding the use of more expensive pneumatic diverters. The idle 90 ° curves can be combined to obtain 180 ° curves, and allow you to create packaging lines even in confined spaces, thanks to their small footprint. They have widths of 500-650-800 mm and can be equipped with metal wheels with a diameter of 48 mm, or metal rollers with a diameter of 32 or 48. The metal wheels, thanks to their particular smoothness, allow the advancement of the boxes also with a minimum inclination.

Extendable roller conveyors with plastic wheels and galvanized steel pantograph structure for handling boxes, cassettes and packages with a flat base. They are normally positioned at the outlet of packaging machines and taping machines for the accumulation of packages and allow to realize different forms of route with curves up to 180 ° (depends on the length of the roller conveyor). The roller conveyors are equipped with supports with wheels with brakes and they are easily extendable and resealable, they can thus be moved and stretched, taking up very little space when not used. The movement of the boxes occurs by gravity and the box stopper terminal (included) avoid the fall. The roller conveyors with width mm. 800 are equipped with central pantograph to make the structure more robust. Standard supports are adjustable in height from mm. 650 to mm. 900 but on request you can have supports with height mm. 450-650 (same cost) or mm. 950-1250 with increase.

Roller conveyors extensible with metal rollers for handling boxes, cassettes and packages with a flat base. They are normally positioned at the outlet of packaging machines and taping machines for the accumulation of packages and allow to realize different forms of route with curves up to 180 ° (depends on the length of the roller conveyor). The roller conveyors are equipped with supports with wheels with brakes and they are easily extendable and resealable, they can thus be moved and stretched, taking up very little space when not used. The movement of the boxes occurs by gravity and the box stopper terminal (included) avoid the fall. The roller conveyors with width mm. 800 are equipped with central pantograph to make the structure more robust. Standard supports are adjustable in height from mm. 650 to mm. 900 but on request you can have supports with height mm. 450-650 (same cost) or mm. 950-1250 with increase.

STANDARD MODELS WITH FREE ROLLER DIAM. MM 32 - PITCH MM. 40 FOR SMALL PACKAGES Roller conveyors consist of a sturdy structure profiled in painted steel, with supports legs fixable to the floor and adjustable in height, rollers in galvanized steel with rotation on shielded ball bearings. The roller conveyors are built according to the capacity and size of the boxes to be handled.

Loading Bellows for: - closed loading (container, tank trucks) - open loading (lorries, ships) - mixed loading suitable for conveying products (powder, grain and fibre) from storage containers to container, tank trucks, lorries & ships. Available with or without integrated filter, with various equipment for different products, temperature ranges, ATEX etc.

FREE ROLLER CONVEYORS DIAMETER MM. 60 AND PITCH MM. 80 FOR PALLETS The free roller conveyors P80 are characterized by a rollers diameter of mm. 60 mm and pitch mm. 80 and are the ideal solution when handling pallets, containers with reduced base and standard pallets with cross feed. They consist of a robust structure coated steel profile, with fixable supports and adjustable feet. The rollers are of high quality made of galvanized steel. Rotation on shielded ball bearings with permanent lubrication. The roller conveyors are built according to the scale, size and characteristics of packages to be handled.

STANDARD MODELS WITH FREE ROLLER DIAM. MM 50 - PITCH MM. 75 FOR MEDIUM AND LARGE PACKAGES Roller conveyors consist of a sturdy structure profiled in painted steel, with supports legs fixable to the floor and adjustable in height, rollers in galvanized steel with rotation on shielded ball bearings. The roller conveyors are built according to the capacity and size of the boxes to be handled.

PLANS BEARING DIAMETER 12 mm Suited to the handling of products with rigid bottom, allow to move with a push packages in any direction. Are normally used in semi-automatic lines where there are several discharge conveyors and the operator has to choose the direction that must take a specific product / package. The standard plans are made with ball diameters of 12 mm, wheelbase 37.5 in staggered rows.

Meeting the needs of our customers, in recent years we have specialised in the design and installation of structures for photovoltaic systems. All of our company's structures today allow all parts of the photovoltaic system to be attached directly to the ground and to concrete mixes, ensuring excellent standards of solidity and strength. This is why our roofing structures are state-of-the-art and guarantee remarkable durability. To request a quote, please do not hesitate to contact our office in Sarno, in the province of Salerno.

MODEL RG - FREE ROLLER-COATED DIAMETER 32 MM - PITCH 40 MM FOR SMALL AND FRAGILE PACKAGES Free rollers conveyors that consist of sturdy painted steel 2 mm thick, 50x25 mm tubular support, legs fixable on floor and adjustable in height, 32 mm diameter steel rollers coated with rubber, rotating on ball bearings (8mm axle). The versions with a width of 1000 mm consist of a 2-roller axis with central support. This solution allows to have a greater flow rate that reaches up to 90 Kg/m.

This is a series of large industrial cooling towers for power generation, steel and aluminium processing, cogeneration and other large production sites. Efficiency, high performance, reduced installation and transport costs are granted.

Dry coolers are simple and reliable equipment. Their operating principle is based on a sensible heat exchange between air and water where: air is drawn in by fans through a finned coil, while water (or a mixture of water and glycol) flows through the tubes that make up the coil and cools when the (cooler) ambient air laps the surface of the latter. Fins are used to increase the overall heat exchange surface area so that the equipment can be as compact and efficient as possible.

The PU series field-erected industrial cooling tower can serve very large plants: especially oil & gas, chemical and power generation. Available for all industrial water. Different materials are supplied according to project needs: concrete, steel, fiberglass and pultruded.

The PAD-V adiabatic system is the optimal solution for increasing the efficiency of air systems, with capacities from 75 to 1,100 kW. Dry operation during cold periods: ambient air is drawn in and conveyed to the heat exchange coils (where the fluid to be cooled passes through): no water in the circuit, as during standard dry cooler operations. Energy use is also optimized by electronically modulated fan speeds based on temperatures. Adiabatic operation during hotter periods: outside air passes through the humidifier pack to be pre-cooled, before being conveyed to the finned coils and performing its cooling function: efficiency is increased. This also makes it possible to work at lower ambient temperatures.

Rebar shearing machine for fast bars cutting. Cutting antirepetitiveness system. Capacity 1 bar Ø 40 mm (#11) 50 cuts/minute

Complete solutions specifically studied and designed for a more efficient and automatic management of evaporative cooling towers and industrial coolers. Some advantages of integrated cooling systems. - Program and modulate the progress of the machine during its use. - Optimize electricity consumption and water treatment. - Dosage and salinity control. - Water collection. - Remote monitoring and predictive maintenance possibility.

A light and non-corrodible open-circuit evaporative cooling tower: process industry and HVAC operators will be able to count on its multiple versions and ease of transport and installation.

Ideal for water saving maintaining a high efficiency. All operations are managed by PLC with the possibility of remote management in “Industry 4.0” mode. Suitable for both industrial and HVAC fields of application. The adiabatic cooler, sometimes called adiabatic dry cooler or dry cooler with adiabatic pre-coolers, is designed to work with both air and water, with particular attention to efficiency. The external air is used to cool the liquid during dry operation and it is pre-cooled only in hot periods with wetting cycles of about 15 seconds during adiabatic operation (“adiabatic pre-cooling”).

Offshore containers are used on board of vessel and platform for extraction and exploration. These units are fitted with openings, doors, windows, connections accordingly with customer’s requirement. Internal insulation and fittings are normally customized. Certified EN12079 and/or DNV 2.71

Drycoolers are simple and reliable equipment. Their principle of operation is based on a sensible heat exchange between air and water where: air is drawn in by fans through a finned coil, while water (or a mixture of water and glycol) flows through the tubes that make up the coil and cools when ambient air (colder cooler) laps the surface of the latter. Exchange coils, with a "V" arrangement within the cooler, consisting of copper tubes and aluminum fins. The angle between the coils, the diameter of the tubes, and the thickness and length of the fins, are sized to ensure the best heat exchange performance, for a given fluid and air flow pressure drops.

STIFERITE Isoventilato a high performance insulation board manufactured from CFC or HCFC free closed cell Polyiso (PIR) rigid foam, covered on the top side by a water impermeable and vapore permeable Laminglass facer, and on the botton side by a saturated mineral fibre facer. Incorporated into the foam of the Isoventilato panel are wood (OSB3) laths that run along the entire length of the top side of the panel. The Isoventilato panel is suggested for insulation of ventilated roofs. Produced by a company certified with systems ISO 9001, ISO 45001 and ISO 14001. CE conformity marking on the entire line.

Specific for preinsulated ductwork

Bossong anchors are embedded into boreholes made in the masonry to be strengthened through drilling machines with diamond bits, that work only with rotation movement in order to avoid vibration and percussion effects on the masonry. Depending on the type of masonry and on the particular setting of the site drilling works can be done with water or air cooling or with techniques that help to avoid the spread of cooling liquids. The choice of the drilling technique is decisive when works are done in unique and precious settings where painting, ancient plasters and stuccoes are present and have to be saved and preserved. The borehole diameter is designed according to anchors size it is usually about three times the steel bar diameter; the length of the anchor is another parameter to be evaluated for the right choice of the borehole diameter.

Bossong plastic sleeves with thread ends for continuous protection system; nylon insulation washer; metallic pipe fittings drilling machine/BOS TP plastic sleeves.

The continuous cycle storage system (dynamic warehouse) consists of gravity roller tables positioned on the ground or incorporated in shelving. The contiguous placement of multiple flow lines and the appropriate exploitation of the height of the storage area by multiple-shelf structures, give these systems great compactness, allowing optimal use of available space.

A company with a global presence cannot operate without paying the utmost attention to the safety of its staff and visitors, the protection of the environment and the sustainability of the entire manufacturing process. The focus on health, safety and the environment has always been and will always be a priority within our company. Activities such as risk assessment, measuring HSE performance, etc. are routine for us. In 2019, M.E.G.A. S.p.A. received ISO 140012015 certification for its environmental management system.