Structural castings - Import export

Frame: Telescopic on two sides made with horizontal tubular steel profiles 40x30mm thickness 20/10 located in the upper and lower parts, anchored to the wall using L-shaped telescopic brackets. Door: made with 40x30mm galvanized steel profiles, 20/10 thickness, assembled by welding. Horizontal tubular crosspiece 30x20mm, filler chosen from our models. Pivot hinges: Composed of a die-cast insert structure within which the cut-resistant solid steel rotation pin with a diameter of 16 mm is controlled. Lock: Mortice lock applied on each door. The lock controls 2 locking tips in solid anti-cut steel, 1 upper and 1 lower. The tips are made of full galvanized steel with a diameter of 16mm and have a stroke of 30mm. Standard anti-drill European safety cylinder is equipped with construction site key + 3 master keys + duplication card. Joint (optional) obtained through mechanical processing of solid steel and carefully welded to the tubulars/crosspieces. The upper

One of the winning features of the Hercules grate is the special PATENTED JOINT which allows for easy and fluid opening of both the internal and external doors, allowing for easy movement of the external shutters. HERCULES 2 – 4 consists of: 4-sided telescopic FRAME, made with 40x30mm galvanized steel vertical profiles, available in 18 variants to best adapt to every construction requirement. GRATED DOOR made with sturdy galvanized steel profiles measuring 60x30mm, while the crosspieces are made of 40x30mm tubing; and as a filler chosen from our aesthetic models. JOINT obtained through mechanical processing of solid steel and carefully welded to the tubulars/crosspieces. The upper joint has a steel nut applied as standard which, in the closed position, embraces the 16mm steel pin inserted on the frame/upper crosspiece. PIVOT HINGES Composed of a die-cast mortise structure within which the cut-resistant solid steel rotation pin, diameter 16 mm, is controlled

The floor panel is a sandwich panel used for floor and roof coverings, whose thickness varies according to the spans and the design loads. This prefab panel, prefabricated in the factory, is generally completed on site by placing concrete into the ribs and upper concrete casting a sort of a disposable, insulating formwork, whose thickness of polystyrene (EPS) varies according to the requirements of insulation and structural resistance. Alternatively, the reinforcement and casting can be done directly in the factory, as for the prefabricated concrete floors. These insulated precast panels are used for floors of structures completely made with panels; floors of buildings made with prefabricated structures, onsite castings or made with metal structure; floors of prefabricated modules.

Light-weight premixed structural concrete, standard UNI EN 206-1 with resistance class LC 20/22 type CLS 1.4; class LC 30/33 type CLS 1.6; class LC 40/44 type CLS 1.8 based on hydraulic binders and hollow spheres of glass, for indoor and outdoor use. To be applied by mechanical projection or by hand for lightened structural concretes in general. It does not corrode metals but protects them if wrapped completely. To be used for internal and external structural castings, for concrete in general with lightness and high resistance characteristics, for collaborative castings on slabs in Putrelle/Laterizio, laterocement, Wood. Type CLS 1.4 Available for quick drying type "R". FPC 0925 production process certificate.

Economic version of the flap discs. Available in back up pad discs and fiberglass version. Features and benefits: These discs offer good cutting and have a good ratio cost/performance. These are particularly suitable for non continuous processing where cutting speed and costs are the main elements. Recommended applications: Deburring, removing welding seams and spots, removing scale, rust and oxidation of any kind, blunting sharp corners and edges. Work surfaces: Stainless steel, alloyed and unalloyed steel, aluminum, nonferrous metals and alloys, structural steel, cast iron, titanium, plastic, pain, varnish, filler.

Overlapped pairs of zirconium flaps and X-weight backing. Only the flat version is available. Main features and benefits: The zirconium abrasive is particularly suitable for applications requiring high operating pressure and even for medium/high-power cornering grinders. The flap paired arrangement provides better ventilation and improves scrap/waste escape. Wide abrasive surface, constant wear, continuous exposure of new grit, high and even cutting performance. Recommended applications: Deburring, removing welding seams, blunting sharp corners and edges. Work surfaces: Stainless steel, alloyed and unalloyed steel, aluminium, nonferrous metals and alloys, structural steel, cast iron, titanium. Minimum order quantity for articles not included in 1036 program: 200 pcs/diameter 115 - 80 pcs/diameter 178

Particularly robust nylon backing. Overlapped pairs of zirconium flaps and X-weight backing. Only the flat version is available. Main features and benefits: The zirconium abrasive is particularly suitable for applications requiring high operating pressure and even for medium/high-power cornering grinders. The flap paired arrangement provides better ventilation and improves scrap/waste escape. Wide abrasive surface, constant wear, continuous exposure of new grit, high and even cutting performance. Always use the backing pad for the 165mm-diameter disc. Recommended applications: Deburring, removing welding seams, blunting sharp corners and edges. Work surfaces: Stainless steel, alloyed and unalloyed steel, aluminium, nonferrous metals and alloys, structural steel, cast iron, titanium.

Individually arranged zirconium flaps and X-weight backing. Only the flat version is available. Main features and benefits: The zirconium abrasive is particularly suitable for applications requiring high operating pressure and even for medium/high-power cornering grinders. Wide abrasive surface, constant wear, continuous exposure of new grit, high and even cutting performance Recommended applications: Grinding, removing welding seams and spots, removing scale, rust and oxidation of any kind, blunting sharp corners and edges. Work surfaces: Stainless steel, alloyed and unalloyed steel, aluminium, nonferrous metals and alloys, structural steel, cast iron, titanium. Minimum order quantity for articles not included in 1036 program: 200 pcs/diameter 115 - 80 pcs/diameter 178

Individually arranged zirconium flaps and X-weight fibreglass backing. Both flat and conical versions are available. Main features and benefits: The zirconium abrasive is particularly suitable for applications requiring high operating pressure and even for medium/high-power cornering grinders. Wide abrasive surface, constant wear, continuous exposure of new grit, high and even cutting performance. Recommended applications: Deburring, removing welding seams and spots, removing scale, rust and oxidation of any kind, blunting sharp corners and edges. Work surfaces: Stainless steel, alloyed and unalloyed steel, aluminium, nonferrous metals and alloys, structural steel, cast iron, titanium. Minimum order quantity for articles not included in 1036 program: 200 pcs/diameter 102 200 pcs/diameter 115 160 pcs/diameter 127 80 pcs/diameter 178

Individually arranged zirconium flaps and X-weight fibreglass backing. Both flat and conical versions are available. Main features and benefits: The zirconium abrasive is particularly suitable for applications requiring high operating pressure and even for medium/high-power cornering grinders. Wide abrasive surface, constant wear, continuous exposure of new grit, high and even cutting performance. Recommended applications: Deburring, removing welding seams and spots, removing scale, rust and oxidation of any kind, blunting sharp corners and edges. Work surfaces: Stainless steel, alloyed and unalloyed steel, aluminium, nonferrous metals and alloys, structural steel, cast iron, titanium. Minimum order quantity for articles not included in 1036 program: 200 pcs/diameter 102 200 pcs/diameter 115 160 pcs/diameter 127 80 pcs/diameter 178