Results for
ROTAIR SPA
Italy
Box-type compressor with compact footprint and low weight, conceived, designed and manufactured to be installed on service trucks, to work in heavy road assistance and repairs, to provide compressed air wherever it is needed. Special sandblasting model, with integrated after-cooler and condensates filtration, available Box-type design, low weight and reduced footprint Pallettized, with lifting hook for easier handling One-side easy access for mainenance and refuelling All air valves and fluid drains on the same side Curbside control panel on the side of air and fluid outlets Lowest acoustic pressure levels as indicated in current legislation provisions Emissions according to the latest parameters Intelligent System – avoids starting load on engine and ensures low pressure shut down.
Request for a quoteM.M. GRIGLIATI
Italy
BENEFITS of composite manhole covers: theft prevention, noise reduction, resistance, lightness, electric insulation, resistance to corrosion. FRP manhole covers of M.M. are manufactured in accordance with the EN 124:2015: A15 (test load 1.5 ton) Areas which can only be used by pedestrians and pedal cyclists, B125 (test load 12.5 ton) Footways, pedestrian areas and comparable areas, car parking decks, C250 (test load 25 ton) For gully tops installed in the area of kerbside channels of roads which when measured from the kerb edge, extend a maximum of 0.5m into the carriageway and a maximum of 0.2m into the footway. D400 (test load 40 ton) Carriageways of roads including pedestrian streets, hard shoulders and parking areas, for all types of road vehicles.
Request for a quoteFLY SRL
Italy
Bike rack made in galvanized and powder coated steel. http://ecommerce.flysrl.com/categoria/arredo-urbano/portabici/
Request for a quoteFLY SRL
Italy
Table + benches for outdoor. Structure made in galvanized and powder coated steel, plan of the table and seats made with wooden slats treated for external use. http://ecommerce.flysrl.com/categoria/arredo-urbano/set-pic-nic/
Request for a quoteFLY SRL
Italy
Litter bin for outdoor, structure made in galvanized and powder coated steel, covered with wooden slats treated for external use, complete of inner container. http://ecommerce.flysrl.com/categoria/arredo-urbano/cestini/
Request for a quoteFLY SRL
Italy
Bike rack for outdoor. Structure made in stainless steel (like the picture) or in galvanized and powder coated steel. 5 - 7 - 9 places. http://ecommerce.flysrl.com/categoria/arredo-urbano/portabici/
Request for a quoteFLY SRL
Italy
Tree grate made in galvanized and powder coated steel. Available in various sizes and designs, the possibility of having combined vertical protection. http://ecommerce.flysrl.com/categoria/arredo-urbano/griglia-salvapiante/
Request for a quoteFLY SRL
Italy
Litter bin for outdoor. Structure made in galvanized and powder coated steel. Complete of inner container. http://ecommerce.flysrl.com/categoria/arredo-urbano/cestini/
Request for a quoteFLY SRL
Italy
Planter made in galvanized and powder coated steel. Available in various sizes and designs. http://ecommerce.flysrl.com/categoria/arredo-urbano/fioriere/
Request for a quoteFLY SRL
Italy
Bench with backrest, structure in galvanized and powder coated steel, seat and back in pine wood, litter bin with ashtray and inner bin, structure in galvanized and powder coated steel, base in stainless steel
Request for a quoteFLY SRL
Italy
Bench for outdoor. Structure made in galvanized and powder coated steel, seat made with wooden slats treated for the external use. http://ecommerce.flysrl.com/categoria/arredo-urbano/panchine/
Request for a quoteBOSCARO SRL
Italy
Designed for the transportation and placement of concrete road barriers with an automatic load and release mechanism for quick and easy material movement. Capacity 5000 Kg Adjustment 50-800 mm Wide opening width allows usage with large kerbs and barriers. Easily adjusted by means of a locating pin and steel jaws on demand for slippery barriers
Request for a quoteTECNOTEK COMPLEMENTS S.R.L.
Italy
CUCINA MOBILE Il meglio della cucina nella location dei tuoi sogni! Un camion equipaggiato con una cucina professionale in grado di funzionare in totale autonomia per servire fino a 1000 coperti. La cucina mobile è infatti corredate di tutte le attrezzature professionali necessarie alla ristorazione con inoltre la caratteristica di essere “viaggianti”, cioè velocemente operative in ogni luogo e in ogni momento. In particolare con la cucina mobile si possono effettuare tutti i tipi di cottura e preparazione. La distribuzione in loco di alimenti caldi e freddi avviene nel totale rispetto delle norme igienico-sanitarie, garantendo quindi prodotti di qualità. La cucina mobile può essere utilizzata in ogni evento, per esempio: show cooking, eventi fieristici, convention, meeting, matrimoni e festività in genere, ma anche per calamità naturali e stati d’emergenza.
Request for a quoteTECNOTEK COMPLEMENTS S.R.L.
Italy
DOCCE MOBILI Con i nostri Shower Truck forniamo in maniera pratica e veloce docce mobile per eventi e maxi emergenze Shower Truck è l’unico veicoli in Italia a fornire il servizio di camion docce con acqua calda ad uso continuo. Tecnologicamente studiati per far fronte alle necessità degli organizzatori di eventi sportivi, i nostri Shower truck risolvono con decoro, pulizia e comfort il problema delle docce da mettere a disposizione dei partecipanti. Completamente indipendenti, hanno solo bisogno di carico di acqua da idrante con pressione non inferiore ai 5 Bar e scarico in fognatura o similare. Grazie alla tecnologia Shower truck siamo in grado di garantire acqua calda per tutto il periodo concordato senza nessun fermo tecnico o calo di funzionalità. Le caldaie per un totale di 950.000 KCal sono ridondanti per scongiurare il disservizio in caso di blocco di un bruciatore.
Request for a quoteCM SRL
Italy
Industrial sweeper for forklift, weight 350 kg, working width 150 cm, complete with 3-point hitches and hydraulic hoses, with reinforced steel mixed brushes, 100 lt water tank. with 12 Volt pump, bucket opening with 12 Volt solenoid valve and hydraulic cylinder, CE certificate, use and maintenance manual, ready for assembly.
Request for a quoteCM SRL
Italy
Sweeping bucket for tractor with 150 cm working height + 30 cm (side brush) complete with side brush kit with independent motor and water kit with 12 Volt pump, hydraulic bucket opening + nozzle bar with nebulization. CE Certificate, Use and maintenance manual, 24 Month GOLD WARRANTY.
Request for a quoteCM SRL
Italy
Cold planer for excavator arm from 10 to 15 tons, weight about 600 kg, milling width 45 cm x 18 prof. max. complete with bracket and hydraulic connection pipes. Use and maintenance manual, CE certificate, 12 months warranty.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
SICILY ACTIVITIES
Italy
Meet with our native friendly food-loving Guide in front of Sant’Anna Church at 18:30 and start Your Palermo food and wine Tour. Walking through one of the most elegant and historical area of Palermo find out old, traditional and authentic taverns where You can savour a variety of typical food, wines, pastries and liquors to get a real taste of Palermo alternative to the street food.
FIP ARTICOLI TECNICI S.R.L.
Italy
These joints are obtained by opposing two finger-shaped metal elements: each is fixed to its head, thus ensuring, thanks to a suitable interpenetration, continuity of the carriageway in case of expansion/shrinkage. Their static layout can act as a beam on two bearings when the finger rests on both heads or as a shelf when it overhangs a head. A specific device is needed, usually a gutter, to ensure the gap watertightness. Special attention should be paid to the alignment during the installation phase and to the head anchoring, especially in the case of shelf layout. Except for special arrangements, this type of joint permits limited transverse displacements. TIPOLOGIE: SFE 90/65 GP FE C
Request for a quoteFIP ARTICOLI TECNICI S.R.L.
Italy
Joint 90/65 AS (levelled wings) was specifically designed for highway use within structures creating longitudinal movements of ± 15 (mm), vertical movements up to 10mm. It consists of an extruded rubber bellows, vulcanized to two 65x80x9 mm T-profiles and anchored to the slab by clamps of suitable diameter, placed at centre distance of 240 mm. The extruded rubber, together with the steel profiles it is vulcanized to, makes up a water-tight system and seamlessly covers the entire width of the road bed. Water-tight capacity around the areas close to the joint is ensured by appropriate water-proof materials. POS. DESCRIPTION MATERIAL A 80x80x9 "T" profile S235JR EN 10025 B Vulcanized rubber profile CR 65 Sh/A CNR 10018 C A.M. clampØ16X15 ÷200 FeB 44K D Pavement
Request for a quoteFIP ARTICOLI TECNICI S.R.L.
Italy
This expansion joint is suitable to absorb longitudinal and transverse displacements of the decks with span up to 25 metres and covering gaps of up to 50 mm. It consists of: • anchoring system consisting of steel anchor clamps (anchor rods) of suitable dimensions and section; • CNR 10018/85-compliant reinforced rubber elements, to be fixed to the slabs, consisting of central bridging plate and two steel bearing elements, subject to prior laying of epoxy resin bedding; • hypalon gutter, fixed to the two slab heads by epoxy plaster. POS. DESCRIPTION MATERIAL A Gap-covering plate Dielectric vulcanized rubber B M12 anchoring system C Gutter Hypalon D Pouring of modified bitumen E Epoxy plaster S Fip 180 F Restoring of base plane Fibre-reinforced cement mortar G Binder H Road surface
Request for a quoteFIP ARTICOLI TECNICI S.R.L.
Italy
This type of joint was specifically designed for highway use within structures creating horizontal movements up to 15 mm and vertical movements up to 5 mm. Due to its characteristics, it can be fitted on any type of structure, whether it is made of reinforced concrete, prestressed concrete or steel. It consists of: • a Hypalon gutter, ending at its extremes with a mesh securing it to the slab; • a neoprene ribbed bulb, of suitable section, resting onto its upper wings on the edges of the slab heads, recessed within the gap. The Hypalon gutter ensures watertightness of the deck and drainage of waters outside of the road bed. It is a seamless type of gutter and it covers the entire road bed with the right slope and it is fixed to the slab by means of a mesh with epoxy adhesive and primer. The function of the neoprene bulb is to support the overhanging pavement. JOINT TYPE HEIGHT H (mm) WIDTH *X (mm) GAP *Y (mm) Bulbo piccolo 43 45 Max 20 Bulbo medio 77 80 Max 40 Bulbo grande 90
Request for a quoteFIP ARTICOLI TECNICI S.R.L.
Italy
FE C series finger joint suitable to absorb decks displacements from 300 mm (± 150) to 600 mm (± 300) consisting of: • overhung finger elements of CORTEN steel; • mechanical anchoring system consisting of multidirectional clamps and anchor rods; • stainless steel gutter; • "L"-shaped stainless steel profile for under pavement waters drainage; • epoxy mortar strips connecting the joint elements and the bituminous pavement. JOINT TYPE TOTAL MOV. (mm) HEIGHT H (mm) WIDTH*X (mm) GAP *Y (mm) ANCHORS Z (mm) ANCHORS T (mm) FE C 300 300 55 760 220 100 115 FE C 400 400 65 890 270 105 150 FE C 500 500 75 1040 320 110 195 FE C 600 600 85 1210 370 130 235 FE C 700 700 115 1310 420 145 250 FE C 800 800 120 1470 470 150 300 Length of finger element = 480 mm * average gap POS. DESCRIPTION MATERIAL A Finger element S355J2WP EN 10025 B Sealant EPOBLOCK ME Legante C Transition strip EPOBLOCK ME 3C D Bedding EPOBLOCK ME 3C / Beton FIP E M16 anchoring system F M24 anchoring system G Gu
Request for a quoteFIP ARTICOLI TECNICI S.R.L.
Italy
GP-type steel finger joints suitable to absorb deck displacements of up to 250 mm (+ I 25) consisting of: • anchoring/support system made of patented anchor rods of suitable section and length; • suitably dimensioned and shaped stainless steel gutter. • active upper part consisting of an overhung metal finger system obtained by the processing of COR-TEN steel plates equipped with bolts, nuts, washers etc.; • under-pavement waters drainage consisting of stainless steel "L"-shaped profile. JOINT TYPE TOTAL MOV. (mm) HEIGHT H (mm) WIDTH*X (mm) GAP *Y (mm) ANCHORS Z (mm) ANCHORS T (mm) ANCHORS ø (mm) GP 50 50 30 400 60 80 45 M16 GP 100 100 30 470 80 105 45 M16 GP 150 150 35 545 105 130 45 M20 GP 200 200 40 620 130 155 45 M24 GP 250 250 45 820 155 180 45 M24 Length of finger element = 480 mm * average gap POS. DESCRIPTION MATERIAL A Finger element S355J2WP EN 10025 B Sealant EPOBLOCK ME Legante C Transition strip EPOBLOCK ME 3C D Bedding EPOBLOCK ME 3C / Beton FIP E Anch
Request for a quoteFIP ARTICOLI TECNICI S.R.L.
Italy
Expansion joint specifically designed for highway use within structures creating longitudinal movements of ± 15 (mm), vertical movements up to 10mm. It consists of an extruded rubber bellows, vulcanized to two 80x80x9 mm T-profiles and anchored to the slab by clamps of suitable diameter, placed at a centre distance of 240 mm. The extruded rubber, together with the steel profiles it is vulcanized to, makes up a water-tight system and seamlessly covers the entire width of the road bed. Water-tight capacity around the areas close to the joint is ensured by appropriate water-proof materials. POS. DESCRIPTION MATERIAL A 65x80x9 finger "T" profile S235JR EN 10025 B Vulcanized rubber profile CR 65 sh/a cnr 10018 C A.M. clamp Ø 16x150÷200 FeB 44K D Construction joint Fibre-reinforced cement mortar E Gutter Hypalon F "L" shaped drainage profile X5 CrNi 1810-UNI 8317 G Epoxy-resin mortar H Road surface
Request for a quoteFIP ARTICOLI TECNICI S.R.L.
Italy
Original RAN P expansion joint suitable to absorb displacements of the decks up to 1000 (mm) as well as relative rotations between consecutive slab heads and their relative movements both in the vertical and transverse direction consisting of: • CNR 10018/85-compliant modular reinforced rubber pads consisting of a central bridging plate and two side bellows equipped with anti-lift bar, free to move along stainless steel plates, assembled in situ; • mechanical anchoring system consisting of threaded bars or, as an alternative, multidirectional clamps and anchor rods, depending on site requirements; • stainless steel gutter; • "L"-shaped stainless steel profile for under pavement waters drainage; • epoxy mortar strips connecting the joint elements and the bituminous pavement. JOINT TYPE TOTAL MOVEMENT (mm) *X (mm) Y (mm) BRIDGE P. (mm) BELLOWS RAN P 400 400 55 760 220 DOUBLE + SINGLE RAN P 500 500 65 890 270 DOUBLE + DOUBLE RAN P 600 600 75 1040 320 DOUBLE + DOUBLE RAN P 700 700 85
Request for a quoteFIP ARTICOLI TECNICI S.R.L.
Italy
llength of modular element = 1000 mm POS. DESCRIPTION MATERIAL A Transition strip EPOBLOCK ME 3C B M20 Anchoring system C Gutter Hypalon D "L"-shaped drainage profile " X5 CrNi 1810-UNI 8317 E Sleeding sheet X5 CrNi 1810-UNI 8317 F Sealant EPOBLOCK ME Granulate
Request for a quoteFIP ARTICOLI TECNICI S.R.L.
Italy
length of modular element = 1000 mm POS. DESCRIPTION MATERIAL A Transition strip EPOBLOCK ME 3C B M20 Anchoring system C Gutter Hypalon D "L"-shaped drainage profile X5 CrNi 1810-UNI 8317 E Sleeding sheet X5 CrNi 1810-UNI 8317 F Sealant EPOBLOCK ME Granulate
Request for a quoteFIP ARTICOLI TECNICI S.R.L.
Italy
Expansion joint made of: • CNR 10018/85-compliant modular reinforced rubber pads consisting of a central bridging plate and side bearing elements vulcanized to steel plates; • mechanical anchoring system consisting of threaded bars or, as an alternative, multidirectional clamps and anchor rods, depending on site requirements; • hypalon gutter; • "L"-shaped stainless steel profile for under pavement waters drainage; • epoxy mortar strips connecting the joint elements and the bituminous pavement. JOINT TYPE TOTAL MOVEMENT (mm) HEIGHT H(mm) WIDTH X(mm) GAP Y(mm) ANCHORS Z(mm) GPE 50 50 42 250 *35 75 GPE 100 100 56 366 *60 115 GPE 150 150 83 555 *85 190 length of modular element = 2000 mm * average gap POS. DESCRIPTION MATERIAL A Sealant EPOBLOCK ME Granulate B Transition strip EPOBLOCK ME 3C C M16 Anchoring system D Gutter Hypalon E "L"-shaped drainage profile " X5 CrNi 1810-UNI 8317
Request for a quoteResults for
Street - Import exportNumber of results
34 ProductsCountries