Sealed bags - Import export

ME 300 SI SHOP SEALER IN STAINLESS STEEL , sealing up to 5 mm This unique stainless steel portable impulse sealer makes it possible to seal bags rapidly while holding the bag with two hands. To activate the sealer the user just needs to depress the work table. This versatile sealer allows the user to package more products efficiently and quickly, they can be used on table top or wall mounted to do vertical sealing. Makes a strong 2,5mm wide seal (wire changeable) on material up to 0,15 mm. x 2. Rust-proof stainless steel body.

Sealer machine with quick closing lever for sealing bags in plastic material heat-sealable, with impulse sealing (resistance heats in a few seconds) and timer for adjustment. The welding cycle is indicated by an indicator light. The double sealing bar (top and bottom) with welding of 10 mm allows the closing of envelopes with high thickness, coupled bags and bellows. Through a selector switch, you can choose whether to use one or two welds. The maximum thickness of weld is 0.25 mm x 4 (total 1 mm).

Sealing machine with stand and mechanical footswitch, constant heat sealing bars fot the closure of polypropylene bags and coupled in aluminum, paper, barrier materials, etc. The sealing bars of the type "hot bar" are equipped with resistance and temperature controller for controlling the temperature from 30 ° C to 200 ° C. The closing of the sealing bars by a mechanical pedal guarantees a high welding pressure and allows the sealing of high thickness envelopes with or without lateral bellows.

ME-CFE CONSTANT AUTO SEALERS WITH MOTOR CONTROL Table top motorized sealer with electric pedal and welding bars at a constant temperature for sealing polypropylene bags and paired/laminated aluminium, paper, barrier materials, etc. The sealing bars of the type "hot bar" are equipped with resistance and thermostat for controlling the temperature from 30 ° C to 250 ° C. The closure of the bars it takes place through an engine which guarantees a high welding pressure (0,7 Kg./cm2) and allows the sealing of envelopes with hight tickness with or without side bellows. Operation The operation provides for the closure of bars and seals the bag following operator control, by electric pedal. This allows the operator to grab the bag with both hands, being able to perform a more precise sealing and parallel to the bag.

VERTICAL VACUUM SEALING MACHINE FOR BAGS - ALSO WITH MAP GAS INLET The sealers mod. DZQ 600 LS/DZQ 800 LS are multifunctional machines suitable for sealing and vacuum packing large bags and sacks, also in MAP (with technical gas injection). The vacuum pump of 20 mc./h. it minimizes air intake times and the machines are equipped with valves for the injection of inert gas for packaging in a modified atmosphere. The double sealing bars with a width of 10 mm. and compressed air closure ensure perfect sealing on any type of material, even of high thickness. The bars are closed by means of a double button command (dual safety control). The sack support surface is adjustable. Thickness max. bag mm. 0.20 (0.8 total with bellows) By means of selectors and potentiometers it is possible to set the "sealing", "empty time" and "gas injection time" functions. The machine is equipped with two nozzles which, when the vacuum option is activated, descend into the bag and perform suction.

Special sealers ME 455/605 VAD with air suction system (max 80%) suitable for volume reduction and better preservation of products. The machine is equipped with a double sealing bar with a sealing width of 5 mm, an electric pedal drive and pneumatic cylinders, mobile nozzles for air intake, an adjustable timer for suction, sealing and cooling. The ME 4510/6010 VAG model with a ATM gas injection system is also available. This variant is equipped with a double sealing bar with a 10 mm sealing width, electric pedal drive, mobile nozzles for air intake and gas injection, adjustable timers for suction, intake, sealing and cooling.

Semiautomatic impulse heat sealers for the bench, for closing PE, PP, PVC and light coupled bags. Equipped with timer, pedal and trimmer. They can be used for: food products, in the automotive, cosmetics, electronics, mechanical and plastic parts, packaging for e-commerce, pellets and agriculture and for chemical products. Available in 460mm and 610mm welding lengths, and 4mm high. Suitable for bags of different thickness, with moist or dusty contents. Double sealing bar with separate regulation of temperatures and times. Manual and semi-automatic operation with electromagnetic closure. Adjustment of the welding power by means of a 6-position switch. Activation by electric pedal or automatic cycle button with digital control of the welding parameters. Digital timer with LCD, for precise control of welding (0-10 sec.) And cooling (0-20 sec.) Times. Can be combined with dosing systems.

Continuous band sealer suitable for closing horizontal bags with a maximum height mm. 400 and max weight. 5 kg. By using PTFE seal belts, polyethylene, polypropylene, cellophane, paper, aluminum, and other laminates can be sealed. The temperature is controlled by an electronic controller and the speed is adjustable. The distance between the solder and the edge of the bag is 20 mm. The distance (width) between the welding headand the conveyor belt is adjustable and is also adjusted the height of the conveyor belt to the plane of welding. The machine is equipped with a marker rotary heat and interchangeable characters (20 charactersmax height 5 mm.), The system works with inked rollers for easy reading and comes complete withphotocell to make a mark at the desired point.

Machine suitable for the closing of bags with height 200 to 700 mm and max weight. 10 kg. The system with two pairs of heating elements and belts PTFE allows the closing of bags made of polyethylene, polypropylene, cellophane, coated paper, laminated aluminum, etc .This particular welding system is strongly recommended in the presence of bags with high thickness and bellows side. The temperature is controlled by two electronic temperature controllers and the feed speed is adjustable. The distance between the solder and the edge of the bag is 30 mm. The welding head and the conveyor belt are independently adjustable in height through flyers. The machine is equipped with rotary solid ink marker and interchangeable characters (max. 20 characters with height 5 mm.). The system works with inked rollers for easy reading and comes complete with photocell to do the marking in the desired place.

MG 300 SEALING MACHINE WITH CLOSING MAGNET Impulse sealers MG 300 series, with 300 mm sealing bar and suitable for sealing polyethylene, pvc and polypropylene bags. They have a special timer for adjusting the sealing time based on the thickness and type of material. The MG sealers are complete with a manual cutting unit for the trimming of the sealed bags and/or the creation of bags from tubular reels (if the machine is equipped with a roll holder). The sealing bars must be closed manually by the operator and are automatically held by a magnet until the end of the cycle. There are special supports with mechanical pedal, for the manual sealing machine and with electric pedal for the sealing machine with motorized bar closing. Maximum weldable thickness 0.15 mm (0.30 tot). Available models: MG 300: bench sealing machine with manual closing of the bars MGM 300: bench sealing machine with motorized bar closing and electric pedal

Impulse sealers MG 621 series, with 620 mm sealing bar and suitable for sealing polyethylene, pvc and polypropylene bags. They have a special timer for adjusting the sealing time based on the thickness and type of material. The MG sealers are complete with a manual cutting unit for the trimming of the sealed bags and/or the creation of bags from tubular reels (if the machine is equipped with a roll holder). The sealing bars must be closed manually by the operator and are automatically held by a magnet until the end of the cycle. There are special supports with mechanical pedal, for the manual sealing machine and with electric pedal for the sealing machine with motorized bar closing. The MG 621 series sealing machines are available with mechanical or motorized closing bars with 3 or 5 mm sealing thickness depending on the model. Also available in stainless steel with mechanical closure of the bars and and 3 mm sealing.

This special automatic table top/vertical with stand constant heat sealer. Are suitable for sealing polypropylene and paired / laminated bags, paper, barrier materials, etc. The sealing jaws of the type "hot bar" are equipped with resistance and thermoregulator for controlling the temperature from 30 ° C to 200 ° C. The closing of the jaws is through an electromagnet which ensures a high sealing pressure and allows the sealing of thick bags with or without side gussets. Operation The operation provides for the closure of bars and seals the bag following operator control, by electric pedal. This allows the operator to grab the bag with both hands, being able to perform a more precise sealing and parallel to the bag. The vertical model with pedestal can be tilted to 90 degrees, has a special support surface to support the bag during sealing. In this way the operator has both hands free to hold the bag since the sealing is made by pressing the pedal.

WHEELED VACUUM PACKAGING MACHINE DZ 400 2E WITH TWO SEALING BARS Wheeled vacuum packaging machine with two lateral sealing bars, made of stainless steel (AISI 304) and equipped with volumetric electronic sensor that enables the continuous vacuum control. Tank with with rounded lid for greater usable height in the central part. The compact size of the tank and the high power of the vacuum pump ensure high productivity. The adjustment of the welding time, vacuum and gas placing occur through practical potentiometers positioned frontally. VACUUM MACHINE WITH GAS INJECTION SYSTEM (MAP) Each sealing bar is equipped with two nozzles which introduce gases in different quantities, so the machines are suitable for the packaging of one single use for each sealing bar. When ordering, it is possible to request a modification to the gas inlet system so as to be able to pack two bags per bar by entering the same quantity of gas for each package.

Impulse sealers MG 820 series, with 820 mm sealing bar and suitable for sealing polyethylene, pvc and polypropylene bags. They have a special timer for adjusting the sealing time based on the thickness and type of material. The MG sealers are complete with a manual cutting unit for the trimming of the sealed bags and/or the creation of bags from tubular reels (if the machine is equipped with a roll holder). The sealers bars must be closed manually by the operator and are automatically held by a magnet until the end of the cycle. There are special supports with mechanical pedal, for the manual sealing machine and with electric pedal for the sealing machine with motorized bar closing. Available models: MG 820: bench sealing machine with manual closing of the bars MGMI 820: bench sealing machine with motorized bar closing and electric pedal

Tabletop manual bag sealers with manual closing and electromagnetic block. Impulse heat sealing (the resistance heats for a few seconds) with timer for adjusting the sealing time and a timer for adjusting the cooling time. The sealing cycle is indicated by an indicator light. Sealing bar length: mm. 300 - 400 and sealing width of 5 mm, maximum thickness weldable 0.20 mm(mm. 0.40 total). Suitable for sealing plastic polyethylene bags of medium thickness, polypropylene, light coupled polyethylene + aluminum / paper.

MG 421 SEALING MACHINE WITH CLOSING MAGNET Impulse sealers MG 421 series with 420 mm sealing bar and suitable for sealing polyethylene pvc and polypropylene bags. They have a special timer for adjusting the sealing time based on the thickness and type of material. The MG sealers are complete with a manual cutting unit for the trimming of the sealed bags and/or the creation of bags from tubular reels (if the machine is equipped with a roll holder). The sealing bars must be closed manually by the operator and are automatically held by a magnet until the end of the cycle. They can be equipped with special supports with mechanical pedal, for the manual sealing machine and with electric pedal for the sealing machine with motorized closing of the bars. The MG 421 series sealing machines are available with bars with mechanical or motorized closure with a sealing thickness of 3 or 5 mm depending on the model. There are also special models in stainless steel and with 2 parallel welds of 3 mm.

Vacuum packaging machine large with two perpendicular sealing bars and stainless steel construction (AISI 304), with digital panel and volumetric electronic sensor for constant vacuum control. Using the short sealing bar can package products with lengths up to 820 mm. Instead using the long bar can be made more packages with a max lenght of 520 mm. The vacuum pump 40 m³/h. ensures a high productivity. Vacuum machines can be equipped with gas injection system (MAP). Each sealing bar is equipped with two nozzles which introduce gases in different quantities, so the machines are suitable for the packaging of one single use for each sealing bar. When ordering, it is possible to request a modification to the gas inlet system so as to be able to pack two bags per bar by entering the same quantity of gas for each package.

TABLE MONOBLOC SEALER WITH MANUALLY OPERATED SEALING BAR AN INCORPORATED ROLL HOLDER The SP 600 is equipped with sealing bar with NI-CR wire for simultaneous cutting and welding of the film. Allows to obtain a polyethylene or polypropylene bag, perfectly welded and trimmed, using the normal fold film. Suitable for use in laundries, shirt factories, the textile sector in general, but is also suitable for the food sector for the packaging of the bread. Operation: Place the coil with the open side facing the operator Insert the open-film blade between the two flaps Unroll the film to the desired length Lower the sealing bar and cut the bag Enter the product in the bag and make the welding of the side remained open.

Table top sealer with electric foot pedal and impulse seal suitable for the closures of envelopes in heat-sealable plastic material such as polyethylene, polypropylene, PVC, etc. The foot pedal with magnet hold downd closure, allows the operator to have both hands free. Simple to use and does not require preheating.

Impulse manual bag sealers machines FPS series are the simplest and most economical series of sealers machines. The model FPS-C is equipped with a cutter for trimming the envelope. This system allows you to pack products with different lengths and then performing the trimming of the bag, leaving no protruding edges and unsightly. This model is only available in sizes 300 and 400 mm. The sealers FPS/FPS-C are suited to a medium-low production and allow the closing of plastic bags without folding, with maximum thickness of 0.15 mm (0.30 mm total). The sealing is by impulse (the resistance heats for a few seconds) and can be adjusted by timer. The sealing cycle is generally 3 seconds and is indicated by an indicator light. These sealers has a sealing width of 2 mm.

The PANDYNO FPPD vertical inserters allow to an operator to fill and seal the packs avoiding the use of preformed bags. The operator must in fact insert the product to be packaged in the magazine tube, on which a few meters of tubular film have been previously loaded. The product goes down into the tubular film up to the support surface. The operator manually closes the sealing bar by applying a slight pressure on the bar. The welding machine in a single operation carries out the welding of the package, the cutting of the film and the welding of the bottom of the next envelope. This operation takes place using an electromagnetic blocking device. By equipping the bagging machine with several loaders, it is possible to increase the productivity of the machine. To avoid waiting times it is also possible to pre-load different magazine tubes so that they can be quickly replaced once the film is finished. The standard model can be placed on a bench and comes with a charger of your choice.

SEALING MACHINE/BAGGING MACHINE MOD. SUPER - FOR MASSIVE PRODUCTS Machine consists of a loading tube on which a tubular film with a width of 50 cm is fitted. and a manually operated sealing bar. The loading tube is slightly inclined and facilitates the sliding of the product inside the film, without causing sudden falls. By lowering the sealing bar a perfectly sealed bag is obtained and at the same time the bottom of the next bag is created, a hot cutting system separates the two packages. The SUPER bagging machine can be positioned at the entrance barriers of hypermarkets, supermarkets, shopping centers, to reduce theft, small objects but it is also widely used for packaging technical items, clothing, linen, etc.

PNEUMATIC CLIPPER FOR GABIONS Large sturdy pneumatic clipper with ring closure, using clips of 45 mm. with wire diameter 3 mm. and can close up to a diameter of 15 mm (mm. 13 for model FPPS45P-13). Suitable for the assembly of the containment gabions in mesh, structures and fencing in wire mesh, fixing reinforcements for the building, sealing bags or mattresses that are used as retaining walls, sound barriers, dikes, road reinforcements, reinforcement of banks, horticulture, traps and rockfall protections.

MANUAL CLIPPER FP HR 45M FOR GABIONS Large sturdy manual clipper with ring closure, using clips of 45 mm. with wire diameter 3 mm. and can close up to a diameter of 15 mm. Suitable for the assembly of the containment gabions in mesh, structures and fencing in wire mesh, fixing reinforcements for the building, sealing bags or mattresses that are used as retaining walls, sound barriers, dikes, road reinforcements, reinforcement of banks, horticulture, traps and rockfall protections.

PNEUMATIC SEALER CP 500 Electropneumatic sealer with double sealing impulse bar with (the resistance heat for a few seconds) suitable for closing packaging polyethylene, PVC and polypropylene, coupled aluminum, etc. It has four positions of voltage to the sealing bar, timer for adjusting the welding time and timer for the cooling time. The double sealing bar (top and bottom) welded from 3 mm allows the closing of envelopes very thick, laminated bags and bellows. The closing of the bars takes place by a pneumatic cylinder unit with pressure and pedal control. Maximum thickness weldable 0.25 mm. The CP 500 can be easily oriented from 0 to 90 degrees.

FPXBAG-NEW is an innovative semiautomatic vertical packaging machine which combines different existing technologies with unique innovations. FPXBAG-NEW is an easy to use, economical and functional form-fill-seal machine which creates 3 hermetic sealing bags starting from a plain foil roll. Compared to the other vertical machines, FPXBAG-NEW has an innovative system of forming box which allows to get a fast format change. This systems reduces the machine shot-down and we gain in productivity. Moreover the two clamps of the horizontal sealing allow to keep the forming bag in position reducing the any break possibility. The key factor of the FPXBAG-NEW is the versatility of the machine which can seal any kind of film, this thanks to the incomparable sealing system. The machine is supplied with 1 forming tube type 200 (suitable for making bags with a width of 185 mm). On request it is possible to have forming tubes with different sizes, type 200 and type 250.

Electric sewing machine Mod. FPMP 82 (220 V and 12 V ) for bags particularly robust, vibration-free, usable in agricultural industries, chemical, food, packaging, textiles, for use in finishing. Suitable for sealing bags of a different type of paper, jute, fabric and plasticized, etc. such as bags of food or chemicals. The FPMP 82 can be used for the sewing of the collection nets of olives or antihail. The operation with reciprocating motion with "wear" arrangement allows a very efficient grip even on medium to high thicknesses. The machine works with standard 220 volt electric cable. It's also available in 12V that can be equipped with external battery and backpack. For uses other than those listed please send us a test sample of your product.

MG 1020 SEALING MACHINE WITH CLOSING MAGNET Pulse sealers MG 1020 series, with 1020 mm sealing bar and suitable for sealing polyethylene, pvc and polypropylene bags. They have a special timer for adjusting the sealing time based on the thickness and type of material. The MG sealers are complete with a manual cutting unit for the trimming of the sealed bags and/or the creation of bags from tubular reels (if the machine is equipped with a roll holder). The sealing bars must be closed manually by the operator and are automatically held by a magnet until the end of the cycle. There are special supports with mechanical pedal, for the manual sealing machine and with electric pedal for the sealing machine with motorized bar closing. Available models: MG 1020: bench sealing machine with manual closing of the bars MGMI 1020: bench sealing machine with motorized closing of the bars and electric pedal

Heat-sealing roller FP802/803 with constant heat which allows the sealing of bags and heat-sealable materials. This roller allows you to make seals with different shapes (square, circular, etc.) according to your needs. Once the roller has been switched on, the operator must wait for the roller to warm up for about 10 minutes. The temperature is adjustable via a potentiometer and reaches a maximum of 200 ° C. There is no graduated scale. The temperature must therefore be set following practical tests on the material. The use is manual. The pressure, the sealing time and the temperature must be managed by the operator. The sealing result depends exclusively on its ability and therefore the result can vary between seals. The coating of the anti-adhesive Teflon roller allows to seal bags in polypropylene, polyethylene and laminated materials. It is supplied complete with a mat in silicone material which, positioned under the product to be sealed, is the ideal match for sealing.