Seal gaskets - Import export

ASM.CF tank cap, 2” female threaded, in aluminium material, complete of different types of sealing gasket in relation to the fluid in the tank. It is available hermetic or ventilated or equipped with a controlled ventilation system through valves. For the optimal operation of the endothermic engine or in case it is required by law or specific regulations, the ASM.CF tank cap can be equipped with unidirectional valves, that allow both the expulsion of vapors generated by fuel and the air inlet into the tank; moreover, in case of tank overturning, the loss of fuel is limited by the valves of controlled ventilation system. The ASM.CF fuel plug can be equipped with a removable filter and/or safety chain or cable. This product particularly lends itself to customizations with writings, company logos and drawings.

In addition to gaskets and sealing systems, Movingroup ensures a wide range of hydraulic breaker components are always in stock, allowing it to respond to customer requests as soon as possible. In addition to the various seal kits, we also provide shock absorbers and diaphragmsfor the various hammer models.

- Size DN100 - 150 - 200 - 250 - 300 - 350 - 400 - 2 half-bodies in cast aluminum with double flange: identical upper and lower flange - Possibility of installing the fitting for flexible connection SFU - Pressure / vacuum seal up to 0.2 bar - Disc in aluminum or stainless steel AISI 304 (upon request in AISI 316) - NBR gasket (upon request suitable for contact with food) - HNBR Therban - Viton - Gasket profile: for sealing only on the disc or covering the flanges - DN5482 splined drive shaft or ISO 5211 square, both in standard or extended length - ATEX certified version upon request - Manual, motorized or pneumatic actuators

Conical sealing gasket for ring nuts 200013-200016

Sealing gasket dm. 30 for drain series 99 - eliminates any leaks from the ring nut 9916.

Sealing gasket dm. 32 for drain series 99 - eliminates any leaks from the ring nut 9916 at the outlet of the siphon 9920-9921

Suitable for draining condensate or tank washing water. It can be assembled after the installation of the bench without creating encumbrances that can hinder handling. For this purpose, the siphon is supplied complete with the tub element 200028 that is connected to the siphon by means of a bell gasket.

Sealing gasket for drain dm. 32 (9919/1) Exhaust series 99

240 fuel tank cap with key, in steel and stainless steel material, with internal bayonet coupling, passage diameter 40 mm and different types of sealing gasket in relation to the fluid in the tank. It is available hermetic, ventilated or ventilated through valves. For the optimal operation of the endothermic engine or in case it is required by law or specific regulations, the 240 tank cap can be equipped with unidirectional valves, that allow both the expulsion of vapors generated by fuel and the air inlet into the tank; moreover, in case of tank overturning, the loss of fuel is limited by the valves of controlled ventilation system. We can supply it also with black cap covering and, at your request, a version with aluminium effect of cap covering. We manufacture types with all metal components in stainless steel for nautical application, corrosive environments and Urea solutions (AUS 32 (AdBlue®)).

AIR fuel tank cap with key in technopolymer and aluminium material, with internal bayonet coupling passage diameter 40 mm and different types of sealing gasket in relation to the fluid in the tank. It is available hermetic or ventilated and it can be equipped with safety chain or cable as well as with removable filter. On request, we can supply it in grey or white color. AIR tank cap is usually sold with our bayonet filling systems passage Ø 40 mm with flange or with our niches series 32–40–50 for connection to flexible fuel hose of different diameters (Ø 32 mm / 40 mm / 50 mm) or with our complete filling systems, that can be customized in relation to specific needs. The additional use of built-in housing for filling caps make easier and very faster the assembling operation of fuel filling systems in the most industrial applications.

950 tank cap female threaded, in plastic material, passage diameter 32 mm, with different types of sealing gasket in relation to the fluid in the tank. It is available hermetic, ventilated or ventilated through valves. For the optimal operation of the endothermic engine or in case it is required by law or specific regulations, the 950 tank cap can be equipped with unidirectional valves, that allow both the expulsion of vapors generated by fuel and the air inlet into the tank; moreover, in case of tank overturning, the loss of fuel is limited by the valves of controlled ventilation system. 950 fuel tank plug can be supplied in different colours on request. The trapezoidal threaded filler neck profile, compatible with 950 tank cap, is obtained directly from the tank molding. The ergonomic design makes the handle easier also when the worker uses his working gloves;

It is supplied with or without fixing ring nut code 9917 and on request with: sealing gasket code 0103

Suitable for draining water and condensate. It is supplied with or without the fixing ring nut code 9929 and on request with: sealing gasket code 0102.

Suitable for draining water and condensate. It is supplied with or without the fixing ring nut code 9929 and on request with: . sealing gasket code 0102.

Suitable for draining water and condensate. It is supplied with or without the fixing ring nut code 9929 and on request with: sealing gasket code 0102.

It is supplied with or without fixing ring nut code 9924 and on request with: closing cap code 9912 sealing cap code 9912/S sealing gasket code 0101.

It is supplied with or without fixing ring nut code 9924 and on request with: closing cap code 9912 sealing cap code 9912/S sealing gasket code 0101

9922 1-inch gas T-kit consisting of the following elements: 9919/1 1-inch gas drain 9917 ring nut for 1 inch gas drain 9918 gasket for 1-inch gas drain 9916 union nut (3 pcs) 9914 sealing gasket diameter 32 (2 pcs) 9915 sealing gasket dm. 30 9922/1 1-inch gas T-piece

9921 Elbow kit 1 inch gas consisting of the following elements: 9919/1 1-inch gas drain 9918 gasket for 1-inch gas drain 9917 ring nut for 1 inch gas drain 9916 union nut (2 pcs) 9914 sealing gasket diameter 32 9915 sealing gasket dm. 30 9921/1 elbow connection

9910 - 1 inch gas siphon kit consisting of the following elements: 9919/1 1" drain 9918 gasket for 1" drain 9917 1"drain fixing ring nut 9916 union nut (2 pcs) 9914 sealing gasket diameter 32 (2 pieces) 9915 sealing gasket dm. 30 9920 1" siphon 9913 Inspection plug

Suitable for draining water and condensate and for passing cables, it is not possible to join it to our fittings as it does not have a conical connection. It is supplied with or without fixing ring nut code 9926 and, on demand, with: sealing gasket code 0107

Suitable for draining water and condensate and for passing cables, it is not possible to join it to our fittings as it does not have a conical connection. It is supplied with or without fixing ring nut code 9925 and, on demand, with: sealing gasket code 0107

Suitable for water drainage and cable passage, partially threaded, with conical connection,it can be coupled with our fittings 39742. It is supplied with or without the fixing ring nut code 9917 and on request with: closing cap code 9907 sealing gasket code 0103

Suitable for water drainage and cable passage, partially threaded, without conical connection. It is supplied with or without the fixing ring nut code 9917 and on request with: closing cap code 9907 sealing gasket code 0103

Suitable for water drainage and cable passage, partially threaded, without conical connection. It is supplied with or without the fixing ring nut code 9917 and on request with: closing cap code 9907 sealing gasket code 0103

Suitable for water drainage and cable passage, partially threaded, with conical connection that can be coupled with our fittings 39742. It is supplied with or without the fixing ring nut code 9917 and, on demand, with: closing cap code 9907 sealing gasket code 0103

Entirely threaded, for the drainage of water, condensate and for the passage of cables. The particularity of the product is that of having the internal diameter reduced to mm. 27.8. It is supplied with or without fixing ring nut code 9917 and on request with: . sealing gasket code 0103

It has a thread of mm. 47 with reduction to a diameter of 20 mm in the outlet. A rigid or flexible hose holder can be applied. It is supplied with or without fixing ring nut code 9917 and on request with: sealing gasket code 0103

Entirely threaded, for the drainage of water, condensate and for the passage of cables. It differs from 10105/4/1 for the internal diameter of 26 mm. It is supplied with or without fixing ring nut code 9917 and, on demand, with: sealing gasket code 0103