Results for
M.M. GRIGLIATI
Italy
Profiles are obtained with the pultrusion technology which, by allowing to use a very high percentage of fibreglass, guarantees high mechanical performance. Standard profiles are made of isophthalic resin. On request they can be produced using other resins to meet specific customer needs. The standard colours are grey (RAL 7035) or yellow (RAL 1018). All profiles are finished with a polyester surface veil which, since impregnated with a large quantity of resin, seals the profile surface, ensuring the protection from UV rays and atmospheric agents and preventing the fibreglass from blooming. The high mechanical performance, lightness, ease of processing, resistance to chemical and atmospheric agents of the profiles, allow to create versatile and long lasting structures.
Request for a quoteFERPLAST SNC
Italy
FLOOR SCALES WITH LOADING RAMPS FPL SERIES WITH LOW PROFILE - INDICATOR EXCLUDED Low profile platforms, with embossed steel frame and ramps in painted steel. They are suitable for weighing trolleys and pallet trucks as they are equipped with loading/unloading ramps and side rails on the weighing platform. Available in standard or CE-M approved version TECHNICAL FEATURES - Operation with 4 350 Ohm shear-beam load cells in nickel-plated steel, approved according to OIML R60 C3 standards (3000 divisions), IP67 protection degree. - Structure and loading surface embossed in steel, oven painted, RAL 5007 blue color. - Adjustable anti-shock adjustable feet and level bubble. - Power supply from 5 to 15 Vdc. - Hermetic junction box, IP67 wiring with 5m shielded cable for connection to the indicator. - Side rails and double ramp up/down, standard.
Request for a quotePUNTO CURVATURA S.R.L.
Italy
Punto Curvatura adopts a technological solution to bend those profiles that have already been through the powder coating treatment, particularly wooden-paint sublimates.
Request for a quotePUNTO CURVATURA S.R.L.
Italy
The process of three-dimensional curving of aluminium, stainless steel, brass or iron profiles is carried out in two steps: torsion and bending. This is a very complex process, which only a high-skilled staff, with a technological equipment, can carry out.
Request for a quotePUNTO CURVATURA S.R.L.
Italy
The twisting or torsion of the extruded aluminium, stainless steel, brass or iron profiles is carried out via a clockwise (or counter clockwise) solicitation of the cross section against its axis. In order to avoid that this twisting jeopardizes the stiffening rib, we use a filling system to help the stretching and the compression of the fibres. We are able to twist up to 9 mt profiles!
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
PUNTO CURVATURA S.R.L.
Italy
For the installation on roofs and warehouses, Punto Curvatura realizes the curvature of the substructures of aluminium profiles used for photovoltaic systems.
Request for a quotePUNTO CURVATURA S.R.L.
Italy
Punto Curvatura is capable, with special cylinders installed on the bending machines, to comply with the most complex curvature requirements for the realization of tensile structures used to cover circuses, military hangars, museums, exhibition stands, gazebos, stages and agricultural structures.
Request for a quotePUNTO CURVATURA S.R.L.
Italy
Together with the curving of single or double sunshade systems, Punto Curvatura is capable to twist them to meet the different architectural requirements.
Request for a quotePUNTO CURVATURA S.R.L.
Italy
The curve of the aluminum profile used for mobile walls is made with a sophisticated soft curving of the profile, which makes the curve with straight ends to the two sides of the extrusion. The service is performed by means of laser pointing installed on the bending machines.
Request for a quotePUNTO CURVATURA S.R.L.
Italy
The bending of aluminum profiles used in curtain wall systems is carried out with a patented system by filling with a special alloy. During this process, the cross section is not only calendered with millimetric precision, but it also meets all the perpendicular tolerances, avoiding any kind of deformity deflection or "twisted effect", thus maintaining the perfect geometry required.
Request for a quoteINTENSE SRL - TECNICHE DI ASSEMBLAGGIO
Italy
Steel jack in an extra low version, with a maximum lifting capacity of 3000 kg and therefore very suitable for light commercial vehicles. The jack is equipped with nylon wheels (2 swivel wheels) and an extra foot control. Furthermore, the jack has a two-part operating rod with handle and a protective foam cover. The minimum lifting height is 75mm and the maximum lifting height is 505mm. The total length of the jack is 673mm and the diameter of the pick-up dish 108mm. The jack comes with a rubber pad and an extra shell for small material. Capacity (In Ton): 3 Min-Max Height: 75-505mm
Request for a quoteINTENSE SRL - TECNICHE DI ASSEMBLAGGIO
Italy
Steel jack in an extra low version, with a maximum lifting capacity of 2000 kg. The jack is equipped with nylon wheels (2 swivel wheels) and an extra foot control. Furthermore, the jack has a two-part operating rod with handle and a protective foam cover. The minimum lifting height is 75mm and the maximum lifting height is 505mm. The total length of the jack is 675mm and the diameter of the pick-up dish 108mm. The jack comes with a rubber pad and an extra shell for small material. Capacity (In Ton): 2 Min-Max Height: 75-505mm
Request for a quoteINTENSE SRL - TECNICHE DI ASSEMBLAGGIO
Italy
Thread standard: Metric, ISO DIN 13 Type: Hand tap, Form C, for through and blind holes, with straight flutes Application: Conical profile Material of product: HSSG Surface treatment: no For materials: Unalloyed and low alloyed steel, non abrasive material Tensile strength up to: 900 N/mm2 Standard: DIN 352 Tolerance: ISO2/6H With conical profile Set of 3 taps (taper, intermediate, finish). Three-piece hand taps- sets are used for regular threads with coarse pitch, as the thread profile area is larger than for fine threads and the force effects on the taps are greater. The advantage of three-piece hand taps is that the respective parts of a set share the cutting power: The taper tap (No. 1) (marked with one ring) removes 65 per cent of the thread profile and the intermediate tap (No. 2) (marked with two rings) removes 85 per cent. Pre-cutting and reworking with the intermediate tap (No. 2) bring the thread into shape.
Request for a quoteEASY TALENT
Italy
Database of sales agents and salespeople Over the years we have built up a database of sales agents, sellers and commercial profiles operating in different market sectors. It is not just a list of names, but real CVs that we receive through spontaneous applications and responses to research ads. Why choose us? We make ourselves available to our customers: - database of commercial agents and commercial profiles in the sector and with experience; - recruiters specialized in the selection of commercial agents and commercial profiles; - replacement of candidates in case of interruption of the agreed probationary period.
Request for a quoteEASY TALENT
Italy
What do we do The purpose of a head hunter is not only to search and select qualified managerial profiles that match the research requirements defined by the client, but rather to identify candidates who are able to fit into a specific company context, thanks to the background of experience and achievements gained in previous work. Advantages and benefits Head hunters are called this way because over the course of their career they have developed networks of relationships and contacts that are necessary to contact qualified managerial profiles (managers or top managers) in strategic management positions.
Request for a quoteResults for
Profiling - Import exportNumber of results
16 ProductsCountries
Company type