Power-tools - Import export

Gas hand tool for thermo shrinking Hornet, high power (until 90 Kw), but very light and handy with practical handle with fast lever gas and electronic ignition. The high power and ease of use allow a fast shrinking of plastic films of each thickness and the realization of packaging even large. Raptor it's available with power of 70 Kw and 90 Kw. The main areas of application are: Packing : Welding / retraction of packaging also large Boating : Realisation of coverages in plastic film for boat storage Building : Welding and retraction of plastic film for protective scaffolding Environment : Welding of plastic film for coating for containment tanks

Wall pillar for bikes maintenance and restoring – one space in of aluminium and plastic, vise in grey and black plastic, Heigh regulation with tool bowl and screws included. Packaged in one box. dim 94x70xh143cm kg 10

Wall pillar for bikes maintenance and restoring – one space in of aluminium and plastic, vise in grey and black plastic, Heigh regulation with tool bowl and screws included. Packaged in one box.

with sheared nail recovery safety system, designed for the fastening of standard aluminum rivets from D. 2,4 to 6 mm (Ø 6 mm in aluminium) and high performance rivets up to D. 4.8 mm. Lightweight and ergonomic, it is equipped with a joint for compressed air on both sides. Standard rivets Ø 6 only in aluminium.. The riveting tool can be used for high performances FarBolt rivets and similar, by assembling the KIT cod. 74000090. The riveting tool is also suitable for X/S Trifar high performance rivets, by assembling the nozzle p/n 71345652. Maintenance instructions are available in the Video section. Maximum force 10500 N. Stroke 20,5 mm.

Hydropneumatic tool with holding of the rivet and nail recovery. Standard rivets Ø 4,8 only in aluminium. Maintenance instructions are available in the Video section. Maximum force 6639 N. Stroke 16 mm.

RAC AX83 Pneumatic tool with rivet holding and nail recovery. Standard rivets Ø 4,8 only in aluminium. Multifar rivets Ø 4 only in aluminium. Maximum force 5372 N. Stroke 19 mm.

Standard rivets Ø 4,8 only in aluminium. Multifar rivets Ø 4 only in aluminium. Maximum force 5372 N. Stroke 19 mm.

RIVETING TOOL for fastening Farbolt, Tamp and other structural rivets with Ø 4,8 and Ø 6,4. THE K33F is a tool with telescopic extending levers developed to increase the lever ratio and, therefore, decrease the effort in fastening the rivet.

Compared to the previous model (K20), it defers for a remarkable reduction of the strength applied to the levers, reduced sizes and weight and the sheared nail recovery.Standard rivets Ø 7,8 only in aluminium. The riveting tool is also suitable for X/S Trifar high performance rivets, by assembling the nozzle p/n 71345652.

Billhook with leather handle Supplied with blade protector Length: 29cm

Universal scissors with titanium coated steel blades Ergonomic handle with soft touch inserts Packaged in "Try me" blister packs Ideal for fabric and fabrics, paper but also in the kitchen for cutting meat and fish

Hardened forged steel bar bender One head Galvanized finish which increases its resistance to corrosion and therefore its duration

Double open end spanners in chrome vanadium steel Chrome finish Sizes: 6x7mm / 8x9mm / 10x11mm / 12x13mm / 14x15mm / 16x17mm / 18x19mm / 20x22mm / 21x23mm / 24x26mm / 25x28mm / 30x32mm With hanging plastic support

Set of 6 screwdrivers Ergonomic handle in non-slip rubber Measurements: - 4x100 5x125 6x150 | + 1x75 2x100 3x150 Packed in a display box

Carpenter pencil with oval section with soft tip (HB). Suitable for marking wood and construction materials. The shape of the pencil prevents it from rolling away and getting lost.

Knee pad made of polyurethane With double adjustable elastic band to ensure a perfect fit

Flat or notched two handed plastering trowel ideal for finishing, stucco and building works in general Electro-welded two-handed wooden handle Size: 48x14cm

PE-LD mortar box Also available in an iron-reinforced version both on the long sides and on the handles

Leather tool bag 9 pockets Double stitching with rivets Adjustable belt

Curved steel brush Brass-plated steel wires Ergonomic plastic handle

Brushless motor offers high performance and low maintenance, eliminates carbon dust for cleaner operation Economic design using proven features of the HIOS® BL and CL Series tools The screwdriver body uses an anti-static body case to prevent the generation of static electricity, suitable for the assembly of precision equipment and electronic parts 4mm and 5mm drive type are a HIOS® drive (wing style) Inline body style Integration of the screwdriver and the counter is optimal for space-saving operations Visual fastener count (up or down); including total count Detects and eliminates costly screw-fastening errors Detects cross threading, omission, unfinished rundowns and cycle complete Fastener accept and reject lights - Go/No Go RoHS compliant and CE certified Power Supply: T-45BL, T-70BL, or PS-55 up to 1.7 N.m

Press brake tools for machines: Bystronic-Hammerle, Durma, EHT, Finn-Power, Jordi, Gizelis, LVD, Trumpf, Prima Power, RICO PRCN, Safan-Darley, STR, Ursviken etc. We supply solid pieces 100, 200, 300, 500 mm; section set (cutted) 550 mm and complete sets for the full length of your press brake according to the customized pieces or the same as original tooling. For TRUMPF-WILA press brake tools we can offer 100% compatible tools as original. Dies could be used with Beyeler-Bystronic system. Any punches for Trumpf-Wila with low weight could be equipped with push buttons for quick frontal extraction. We can provide special press brake tools, study the projects and drawings, virtual simulation of bending process and study of the available tonnage and possible limitations of bending. All main press brake tools could be supplied within 1 working week. We are available to make quick and professional delivery to any part of European Union.