Nylon wheels - Import export

MANUAL TRANSPALLET MOD. FP BFZ 20 W 320 NARROW With special joined forks and only 320 mm width. Maintains the solid structure of pallet standards but allows the handling of heavy loads with reduced dimensions.

The hydraulic davits are made of a sturdy steel frame, nylon wheels for easy handling, telescopic arm with swiveling hook, hydraulic pump with hand lever actuation. FOLDABLE CRANE-SCFP 1000A Painted steel structure Front supports folding for easy transport and storage Telescopic arm with 3 positions Hydraulic pump with lever Nylon wheels with high smoothness Lifting piston chromed Safety valve to prevent overloading Strong hook with 360 ° rotation Test with overload of 125% CE compliance

The hydraulic davits are made of a sturdy steel frame, nylon wheels for easy handling, telescopic arm with swiveling hook, hydraulic pump with hand lever actuation. FP SA 1000 hydraulic davit Robust construction in painted steel Front supports suitable for deposit and withdrawal from Europallet Hydraulic pump with hand lever Telescopic arm 4 position then more capacity than a regular crane 3 position Nylon wheels with high smoothness Lifting piston chromed Safety valve to prevent overloading Strong hook with 360 ° rotation Test with overload of 125% Confirmations to CE

MANUAL LIFTER FOR PALLETS MOD. FPSDJ 1010 - shipped fully assembled! Pallet lifter with hydraulic foot pump and rudder ( for low weight can use the pedal), steel frame with fork tip rounded, directional nylon wheels with brakes and double rollers, fixed width forks. WARNING: all the elevators are shipped pre-assembled, tested one by one before packing in a professional manner and with CE certification.

MANUAL LIFTER FOR PALLETS MOD. FPSDJ 1030 - shipped fully assembled! Pallet lifter with hydraulic foot pump and rudder (for low weight can use the pedal), steel frame with fork tip rounded, directional nylon wheels with brakes and double rollers, fixed width forks. The telescopic structure of the elevator, thanks to the minimum height of the mast of 2080 mm, it allows to pass under the majority of doors and openings. The lifter height of 2080 mm also keeps raising the load to a height of about 15-20 cm.Over 20 cm of lifting, the structure begins to slip and the height of the trolley increases to reach 3.5 meters when the load is raised to 3 meters. WARNING: all the elevators are shipped pre-assembled, tested one by one before packing in a professional manner and with CE certification.

MANUAL LIFTER WITH LATERAL TILTER MOD. FP T8090 Lifter for pallet and boxes with hydraulic pump driven by steering shaft and lateral inclination up to 15°. Designed specifically to allow operators to withdraw/deposit products inside a container while maintaining an ergonomically correct position. The inclination can be made either to the right or the left. Sturdy steel frame with forks tip rounded, nylon steering wheels with brakes and protection for feet.

MANUAL LIFTER FOR PALLETS MOD. FPSDJ 1025 - shipped fully assembled! Pallet lifter with hydraulic foot pump and rudder (for low weight can use the pedal), steel frame with fork tip rounded, directional nylon wheels with brakes and double rollers, fixed width forks. The telescopic structure of the elevator with a minimum height 1840 mm allows to pass under doors and openings. The lifter maintains a height of 1840 mm also lifting the load at a height of about 15 cm. Over 15 cm lifting of the load, the structure begins to slip and the height of the trolley increases to reach 3 meters when the load is raised to 2.5 meters. WARNING: all the elevators are shipped pre-assembled, tested one by one before packing in a professional manner and with CE certification.

MANUAL LIFTER FOR PALLETS MOD. FP SDJA 1016 with adjustable forks - shipped fully assembled! Pallet lifter with hydraulic foot pump and rudder (for low weight can use the pedal), steel frame with fork tip rounded, directional nylon wheels with brakes and double rollers, forks with adjustable width. Caution: the front supports have fixed width standard of 570 mm. WARNING: all the elevators are shipped pre-assembled, tested one by one before packing in a professional manner and with CE certification. The elevators FPSDJ are very practical and robust, recommended where the paving is smooth (eg warehouses) where the occasional and not continuous lifting of pallets does not justify the purchase of a battery model. The structure and operation are similar to those of a standard pallet truck. You can lift the load both through rudder or pedal. For each pumping the forks are raised about 3 cm The descent is done by pressing the lever on the rudder.

HYDRAULIC DRUMS TILTER MOD. DA-FP 45 for metal or plastic drums. The new drums-tilter mod. DA-FP 45 is equipped with hook and safety band and is suitable for lifting, transporting, emptying both 210 liter metal and plastic drums. Equipped with hydraulic system with pedal or rudder drive, push handles, angular transmission with practical handwheel for drum rotation, hook and safety band to lock the drum, nylon wheels with high smoothness and brake. The lifter can also be used as a stacker for stacking or for positioning the drums on shelves with a maximum height of 1500 mm. The rotation also allows the drum to be placed horizontally at a height of 1650 mm from the ground. RAL 1028 yellow painting. Attention: the drum turner is suitable for handling metal drums or plastic drums with rim (as in the photo). Do not use for different drums.

MMANUAL LIFTER FOR PALLETS MOD. FPSDJ 1500 - shipped fully assembled! Pallet lifter with hydraulic foot pump and rudder (for low weight can use the pedal), steel frame with fork tip rounded, directional nylon wheels with brakes and double rollers, fixed width forks. The model FP SDJ 1500 is equipped with double chain for lifting. WARNING: all the elevators are shipped pre-assembled, tested one by one before packing in a professional manner and with CE certification. The elevators FPSDJ are very practical and robust, recommended where the paving is smooth (eg warehouses) where the occasional and not continuous lifting of pallets does not justify the purchase of a battery model. The structure and operation are similar to those of a standard pallet truck. You can lift the load both through rudder or pedal. For each pumping the forks are raised about 3 cm. The descent is done by pressing the lever on the rudder. And it is controlled and at a safety speed.

MANUAL LIFTER FOR PALLETS MOD. FPSDJ 1016 - shipped fully assembled! Pallet lifter with hydraulic foot pump and rudder (for low weight can use the pedal), steel frame with fork tip rounded, directional nylon wheels with brakes and double rollers, fixed width forks. WARNING: all the elevators are shipped pre-assembled, tested one by one before packing in a professional manner and with CE certification. The elevators FPSDJ are very practical and robust, recommended where the paving is smooth (eg warehouses) where the occasional and not continuous lifting of pallets does not justify the purchase of a battery model. The structure and operation are similar to those of a standard pallet truck. You can lift the load both through rudder or pedal. For each pumping the forks are raised about 3 cm. The descent is done by pressing the lever on the rudder. And it is controlled and at a safety speed.

MANUAL LIFTER FOR PALLETS MOD. FPSDJ 1012 - shipped fully assembled! Pallet lifter with hydraulic foot pump and rudder (for low weight can use the pedal), steel frame with fork tip rounded, directional nylon wheels with brakes and double rollers, fixed width forks. WARNING: all the elevators are shipped pre-assembled, tested one by one before packing in a professional manner and with CE certification. The elevators FPSDJ are very practical and robust, recommended where the paving is smooth (eg warehouses) where the occasional and not continuous lifting of pallets does not justify the purchase of a battery model. The structure and operation are similar to those of a standard pallet truck. You can lift the load both through rudder or pedal. For each pumping the forks are raised about 3 cm. The descent is done by pressing the lever on the rudder. And it is controlled and at a safety speed.

PALLET TRUCK FOR FRUITS AND VEGETABLES PROFESSIONAL SERIES FP PRO-ORTO The pallet trucks for fruit and vegetables Ferplast FP PRO-ORTO series are specially designed for those who work in the fruit and vegetable sector and need to move containers and pallets or crates with greater width. They are also characterized by: - Structure in deep-drawn sheet steel with rounded fork tips. (galvanized steel sheet structure for the FPGS HY 25/122 ORTO model) - Hydraulic unit built in cast iron (resistant and reliable), mounted on a high precision thrust bearing. (steel hydraulic unit for the FPGS HY 25/122 ORTO model) - 3-position control lever with adjustable descent speed. - Lifting with rudder drive and automatic recall in vertical position. - Safety valves for lifting and overload limit switches. - Directional wheels diameter 200 mm, in Nylon with polyurethane band (fully nylon wheels for the FPGS HY 25/122 ORTO model).

MANUAL LIFTER FOR PALLETS MOD. FPSDJ 1016 AS with wide structure - shipped fully assembled! Lifts for pallet with hydraulic foot pump and steering or battery operation, steel structure with rounded tip of the forks, directional wheels in nylon with brakes and two front needle roller, fixed forks. (CE certificate). Version with forks width adjustable from 220 to 950 mm and wide frame. WARNING: all the elevators are shipped pre-assembled, tested one by one before packing in a professional manner and with CE certification. The elevators FPSDJ are very practical and robust, recommended where the paving is smooth (eg warehouses) where the occasional and not continuous lifting of pallets does not justify the purchase of a battery model. The structure and operation are similar to those of a standard pallet truck. You can lift the load both through rudder or pedal. For each pumping the forks are raised about 3 cm. The descent is done by pressing the lever on the rudder.

Steel jack in an extra low version, with a maximum lifting capacity of 3000 kg and therefore very suitable for light commercial vehicles. The jack is equipped with nylon wheels (2 swivel wheels) and an extra foot control. Furthermore, the jack has a two-part operating rod with handle and a protective foam cover. The minimum lifting height is 75mm and the maximum lifting height is 505mm. The total length of the jack is 673mm and the diameter of the pick-up dish 108mm. The jack comes with a rubber pad and an extra shell for small material. Capacity (In Ton): 3 Min-Max Height: 75-505mm

Steel jack in an extra low version, with a maximum lifting capacity of 2000 kg. The jack is equipped with nylon wheels (2 swivel wheels) and an extra foot control. Furthermore, the jack has a two-part operating rod with handle and a protective foam cover. The minimum lifting height is 75mm and the maximum lifting height is 505mm. The total length of the jack is 675mm and the diameter of the pick-up dish 108mm. The jack comes with a rubber pad and an extra shell for small material. Capacity (In Ton): 2 Min-Max Height: 75-505mm

4800708 Sonic Equipment Transmission jack 500kg Professional V-bucket jack, for mounting and dismounting V-boxes and intermediate boxes. This 500 kg version has nylon swivel wheels for easy maneuvering. The jack is equipped with a quick-lift foot control. Due to the reversible pick-up head, the jack is multifunctional. Capacity (In Ton): 0.5 Min-Max Height: 1175-1985mm

Material Nylon Item 3701

Material Nylon body Small parts in galvanized steel Wheels Ø 45 mm in nylon Capacity 15 Kg Weight 220 g Item 1324 Code CRFU 65N2

Material Nylon body Small parts in galvanized steel Wheels Ø 45 mm in nylon Capacity 10 Kg Weight 180 g Item 1304 Code CRFU 65N1

Material Nylon body Small parts in galvanized steel Nylon wheels Capacity 10 Kg Weight 300 g Item 071 Code CRES 65 N4

Material Nylon body Small parts in galvanized steel Nylon wheels Steel wheels with bearing Capacity 5 Kg 10 Kg Weight 240 g 580 g Item 031 041 Code CRES 65 N2 CRES 65 C2

Material Nylon body Galvanized steel Nylon Wheels Ø 25 mm Capacity 10 Kg Saddle Weight Code Item A= 35 mm 130 g TRN1P35N 15 A= 50 mm 140 g TRN1P50N 16 A= 65 mm 160 g TRN1P65N 17 Nylon coated bearing Ø 25 mm Capacity 15 Kg Saddle Weight Code Item A= 35 mm 165 g TRN1P35C 18 A= 50 mm 170 g TRN1P50C 19 A= 65 mm 190 g TRN1P65C 20

Material Nylon body Galvanized steel Nylon Wheels Ø 25 mm Capacity 15 Kg Saddle Weight Code Item A= 35 mm 115 g CRN1P35N 9 A= 50 mm 125 g CRN1P50N 10 A= 65 mm 145 g CRN1P65N 11 Nylon coated bearing Ø 25 mm Capacity 20 Kg Sella Weight Code Item A= 35 mm 135 g CRN1P35C 12 A= 50 mm 145 g CRN1P50C 13 A= 65 mm 165 g CRN1P65C 14