Moving it - Import export

Rotating table for handling or storage of boxes, with large plan diameter 1500 o 2000 mm and capacity 200 kg. Robust. ROTATING ACCUMULATION TABLE - DIAMETER 1500 mm or 2000 mm The rotary table of accumulation is generally used in the final part of the packaging lines and facilitates the discharge of the packaging machines, facilitating the sampling operations by the operator. The table can be equipped with containing side rails and, on request, reinforced to carry heavy weights. OPTIONAL The plan may be made with customized table diameter and a different rotational speed.

MOTORIZED ROLLER DIAMETER MM. 60 PITCH MM. 80 FOR HANDLING PALLETS We realize motorized rollers conveyors with diameter mm. 60 and pitch mm. 80. They consist of a sturdy frame in painted steel and supports with fixable feet, adjustable height. The high-quality rollers are made of galvanized steel with rotation on shielded ball bearings and complete with pinions or sprockets. The transmission is a chain loops or tangential chain. The geared motors groups have suitable power with start/stop switches or photocells control. Normally the rollers have an useful width of mm. 800-1000-1200-1500 and module length of modules mm. 2000-3000. Ideal solution when handling pallets, containers with reduced base and standard pallets with cross feed.

MECHANICAL/HYDRAULIC FM LIFTERS FOR FURNITURE Ideal for transporting furniture, safes, containers and machine tools. The FM series mechanical/hydraulic lifter kit for furniture is suitable for moving furniture components in furniture stores, during removals or simply when you need to move furniture safely and without any effort. The maximum load capacity of the pair is 600kg (FM60 mechanical model) and 1800kg (FM180/A - FM 180/B hydraulic models). The kit consists of 2 lifts with lifting plates with non-slip coating and a strap for fixing. Lifting is by means of a screw with crank for the FM 60 model and a practical lever with a hydraulic pump for FM 180. The lifts are equipped with non-marking pivoting rubber wheels with steering lever. RAL 1028 yellow paint for the FM 180 models and blue for the FM 60 model Operation: Position the lifting plates below the part to be lifted, adjust the upper support and tension the safety belt.

PLANS BEARING DIAMETER 12 mm Suited to the handling of products with rigid bottom, allow to move with a push packages in any direction. Are normally used in semi-automatic lines where there are several discharge conveyors and the operator has to choose the direction that must take a specific product / package. The standard plans are made with ball diameters of 12 mm, wheelbase 37.5 in staggered rows.

MOTORIZED STANDARD CONVEYOR TAPES WITH VARIABLE SPEED Motorized conveyor tapes are made of a structure in steel section with adjustable height supports and a smooth pvc carpet and a smooth pvc carpet moving on a sheet plane. They are used for the transport of boxes and packages in industrial and productive setting. They can be combined with weighing systems, counting, inkjet markers and used as transport systems and sorting boxes. If properly designed can also transport up/down hills Complete with motors of adequate power, electrical system and start/stop switch. The geared motor unit is installed inside of the supporting structure to limit the overall dimensions. The PVC carpet is full of guides and has the metal junction to make easier the disassembly, the cleaning to and the maintenance. The speed of tape is adjustable from 4 to 16 m/min by the convenient potentiometer.

MOTORIZED STANDARD CONVEYOR TAPES WITH FIXED SPEED Motorized conveyor tapes are made of a structure in painted steel section with adjustable height supports and a smooth pvc carpet and a smooth pvc carpet moving on a sheet plane. They are used for the transport of boxes and packages in industrial and productive setting. They can be combined with weighing systems, counting, inkjet markers and used as transport systems and sorting boxes. If properly designed can also transport up/down hills. Complete with motors of adequate power, electrical system and start/stop switch. The geared motor unit is installed inside of the supporting structure to limit the overall dimensions. The PVC carpet is full of guides and has the metal junction to make easier the disassembly, the cleaning and the maintenance. The speed of tape is fixed so it cannot be regulated.

The Sonic Equipment NEXT S8 is an entry model toolbox, best suited for technicians looking for a basic to intermediate toolset. With its compact design of only 80cm in width and 51cm in depth, this toolbox is the ideal box for moving around a workshop, requiring a smaller storage space. Removable steel worktop with composite inlay 5 shallow and 2 deep drawers 60kg telescopic ball bearing slides Total loading capacity of 400kg

One space grounded bike rack in red varnished steel with black PVC caps. With bottom bracket and a plastic protection pivot supplied with 2 reductions in order to fit in different diameters. Bike rack must be threaded in the bottom bracket hole of pedals supporting the bike raising the rear wheel for few cm. It can be also use to hold the bike during its maintenance operation in safety practical way.

One space grounded bike rack in black varnished steel with black PVC caps. With bottom bracket and a plastic protection pivot supplied with 2 reductions in order to fit in different diameters. Bike rack must be threaded in the bottom bracket hole of pedals supporting the bike raising the rear wheel for few cm. It can be also use to hold the bike during its maintenance operation in safety practical way

Coupled with the 0BP0105 drain, it allows the condensate to drain in situations where space is limited.

Rectangular mirror in high temperature moved glass, silvered with an antique mirror, beveled perimeter. Other shapes and sizes possible. 120x70cm Thickness 4 mm.

Agricultural and Earth Moving Machinery Precision Parts Machined to Drawing Machining by turning and milling to drawing - from ferrous and non ferrous materials (plastics), from 2 to 40 mm of diameter, very long parts up to 3700 mm. up to 80 mm diameter from bars and up to 300 mm diameter from slugs or castings using multi axis CNC machines Application: components and precition parts foragricultural and earth moving machinery

The slewing bearing, also known as slew(ing) ring, is a type of bearing for low-speed and high axial load applications. The slewing bearing is a mechanical component that is used in major industrial sectors. Harbor and deck cranes are one of the ideal applications for using slewing bearings – for example, for container handling. Additionally, for wind turbine blades, the use of slewing bearings ensures the highest level of reliability and efficiency, as required by this sector. APPLICATIONS: Earth Moving Machinery Concrete pumps Civil and Harbor Cranes Wind Turbines Radar Robotics Packaging Logistics Material handling Bottling / filling carousels Rotating tables Polyurethane Injection Systems Drilling Rigs Welding Plants Water Treatment Plants Lunapark Woodworking Machines Marble Cutting Machines Palletizers Aerial Platforms Roller Conveyors / Idle Rollers

Thrust ball bearings are separable axial bearings. Features of thrust ball bearings: ideal for reduced and medium speeds they bear relatively high axial loads separable and easy to assemble Single direction thrust ball bearings can accomodate axial loads in one direction and thus locate a shaft axially in one direction. Double direction thrust ball bearings can accomodate axial loads acting in both directions and thus serve to axially locate a shaft in both directions. These bearings, in both versions, have been designed to withstand only axial loads and must not be subjected to radial loads of any kind. Series: 51100, 51200, 51300, 51400 APPLICATIONS: Earthmoving machinery Agricultural machinery Pumps Cleaning Equipment / Industrial cleaning machines Bottling / Filling carousels Electric motors Fitness machines Metalworking machines Glass, marble and woodworking machines Automatic opening systems Oil Industry Oil and Gas rotary tables Vertical shafts

The unique construction of spherical roller bearings make them vital for heavy applications. Their performance is consistent even in extreme conditions, as in the case of high-stress environments and / or reduced lubrication. Spherical roller bearings can give a use life equal to twice that of traditional bearings, according to some estimates. Features of spherical roller bearings: ideal for reduced and medium speeds self-aligning and very robust able to bear radial and axial loads in both directions longer use life compared to traditional bearings excellent compensation for misalignments APPLICATIONS: Earth Moving Machinery Agricultural Machinery Fitness machines Steel working machines Marble processing machines Iron and Steel Industry Oil Industry Automatic opening systems Heavy machinery (eg machines for construction and mining) Bottling / filling carousels Steel mills Industrial transmissions Vibrating equipment / machines Vibrating sieves / vibrating screens

Self-aligning ball bearings are radial bearings with two rows of balls, a common spherical track in the outer ring and a track with two deep and continuous grooves in the inner ring. They are particularly suitable for applications that are prone to alignment errors. Features of self-aligning ball bearings: low coefficient of friction exceptional performance at high speeds no overheating, lower operating temperatures excellent compensation for misalignments ideal for low to medium-high radial loads and reduced axial loads available in open or shielded versions (ZZ – 2RS) and with tapered bore (K) very low noise and limited vibrations minimal maintenance requirements Series: 1200, 1300, 2200, 2300, 11200, 11300 APPLICATIONS: Agricultural Machinery Oil Industry Electrical motors and gearboxes Medical devices Food processing machinery Chemical Industry Pumps

Angular contact bearings are designed so that the contact angle between the raceways and the balls is formed while the bearing is in use. The ability of angular contact ball bearings to withstand axial loads increases proportionally as the contact angle increases. Features of angular contact ball bearings: high stiffness ideal for high-precision performance at high speed able to withstand heavy axial loads and moderate radial loads available with a single or double row, in the open or shielded / sealed versions Series Single row: 7200, 7300 Double row: 3200, 3300, 5200, 5300 APPLICATIONS: Agricultural Machinery Metal processing Oil Industry Paper making machines Wind sector Gearboxes Pumps and Compressors Ventilators /Fans Semiconductors Motorcycle Industry Machine tools Electromechanics Textile machinery Injection molding machines

Formation N° conductors x mm 2 Size mm x mm Weight g/m mm 2 5x1 9,8x20,0 230 5 7x1 9,8x20,0 250 7 8x1,5 13,9x26,0 420 12 10x1 13,8x26,5 350 10 12x1,5 17,3x32,0 560 18 16x1,5 19,1x34,0 640 24 18x1,5 20,0x35,0 730 27 20x1,5 21,1x35,6 790 30 24x1,5 23,0x37,6 880 36 Nominal outer diameter -Tolerance +/- 0,5 mm Construction FF - Extra-flexible conductors in plain or tinned annealed copper R - Insulation with TI1 PVC 07 - Lay-up in concentric layers separated by a textile tape Y - Galvanized steel ropes R - Outer sheath inTM2 PVC Identification Cores identification according to CEI-UNEL 00722 tables; usually with progressive numbering, with or without green-yellow conductor: Blue outer sheath. On request and for minimun quantitative or 3-4000 m, possibility of supplying with black outer sheath. Standards Tabella UNEL 35010 sigle di designazione CCEI 20-29/IEC 228 conductors for insulated cables CEI 20-20/IEC 227 PVC insulated cable CEI 20-35/IEC 332.1 Flame retardant Application The ten

Formation N° conductors 6 9 12 16 20 24 N° conductors for group 2x3 3x3 3x4 4x4 5x4 6x4 Section mm 2 0,75 1,5 2,5 4 6 10 Conductors resistance 26,00 13,30 7,98 4,95 3,30 1,91 Section mm 2 16 25 35 50 Conductors resistance 1,21 0,78 0,55 0,38 Description: HO7VVH6-F N° conductors x mm 2 Size mm x mm Weight g/m mm 2 Capacity max.amp. 4x1,5 5,4x15,6 160 6 20 8x1,5 5,4x29,1 310 12 20 12x1,5 5,4x42,6 470 18 20 16x1,5 15,4x56,1 630 24 20 18x1,5 11,2x46,1 700 27 20 20x1,5 11,4x47,1 780 30 20 24x1,5 11,8x46,5 950 36 20 4x2,5 6,0x19,0 220 10 27 8x2,5 8,2x24,3 440 20 27 12x2,5 6,0x52,6 650 30 27 16x2,5 12,9x40,2 890 40 27 18x2,5 11,6x51,6 1010 50 27 4x4 6,9x21,0 330 16 36 4x6 7,7x24,2 450 24 48 4x10 10,1x30,2 720 40 63 4,16 11,0x35,4 1100 64 85 4x25 12,3x40,8 1550 100 112 4x35 15,4x49,9 2100 140 138 4x50 20,2x64,1 3150 200 168 Nominal outer diameter -Tolerance +/- 0,5 mm Construction H - Harmonized cable 05 - Nominal tension 2 U0 /U: 300/500 V oppure/or 07 - Nominal tension 3 U0 /U: 450/75