Results for
INTENSE SRL - TECNICHE DI ASSEMBLAGGIO
Italy
Thread standard: Metric, ISO DIN 13 Type: Machine tap Form B with spiral entry, for through holes Application: Oversized diameter 6H+0.1mm Material of product: HSSE Surface treatment: no For materials: Unalloyed and low alloyed steel, non abrasive material Tensile strength up to: 900 N/mm2 Standard: DIN 371/376 Tolerance: ISO2/6H+0.1mm Tap for machine use and through holes. The spiral point pushes the chips ahead and prevents clogging of the flutes. + 0,1 mm oversize for electroplating allowance ≈ 25 µm thickness. Our taps and dies are produced to the highest quality standards, to ensure precise quality threads. Wide range of hand, machine and rolling taps, dies and tools for cutting professional threads on various materials Correct lubrication is important for successful thread cutting and to decrease the wear of taps and dies. We recommend using our lubricants.
Request for a quoteINTENSE SRL - TECNICHE DI ASSEMBLAGGIO
Italy
Thread standard: Metric, ISO DIN 13 Type: Machine tap Form B with spiral entry, for through holes Application: Oversized diameter 6G Material of product: HSSE Surface treatment: no For materials: Unalloyed and low alloyed steel, non abrasive material Tensile strength up to: 900 N/mm2 Standard: DIN 371/376 Tolerance: ISO3/6G Tap for machine use and through holes. The spiral point pushes the chips ahead and prevents clogging of the flutes. Tolerance ISO3/6G – Thread with large clearance. Our taps and dies are produced to the highest quality standards, to ensure precise quality threads. Wide range of hand, machine and rolling taps, dies and tools for cutting professional threads on various materials Correct lubrication is important for successful thread cutting and to decrease the wear of taps and dies. We recommend using our lubricants.
Request for a quoteINTENSE SRL - TECNICHE DI ASSEMBLAGGIO
Italy
Thread standard: Metric, ISO DIN 13 Type: Machine tap Form B with spiral entry, for through holes Application: Overlengthed (long shank) L=150 Material of product: HSSE Surface treatment: no For materials: Unalloyed and low alloyed steel, non abrasive material Tensile strength up to: 900 N/mm2 Standard: DIN 371/376 Tolerance: ISO2/6H Tap for machine use and through holes. The spiral point pushes the chips ahead and prevents clogging of the flutes. Overlengthed (long shank), L=150 Our taps and dies are produced to the highest quality standards, to ensure precise quality threads. Wide range of hand, machine and rolling taps, dies and tools for cutting professional threads on various materials Correct lubrication is important for successful thread cutting and to decrease the wear of taps and dies. We recommend using our lubricants
Request for a quoteINTENSE SRL - TECNICHE DI ASSEMBLAGGIO
Italy
Thread standard: Metric, ISO DIN 13 Type: Machine tap Form B with spiral entry, for through holes Application: Overlengthed (long shank) L=120 Material of product: HSSE Surface treatment: no For materials: Unalloyed and low alloyed steel, non abrasive material Tensile strength up to: 900 N/mm2 Standard: DIN 371/376 Tolerance: ISO2/6H Tap for machine use and through holes. The spiral point pushes the chips ahead and prevents clogging of the flutes. Overlengthed (long shank), L=120 Our taps and dies are produced to the highest quality standards, to ensure precise quality threads. Wide range of hand, machine and rolling taps, dies and tools for cutting professional threads on various materials Correct lubrication is important for successful thread cutting and to decrease the wear of taps and dies. We recommend using our lubricants.
Request for a quoteINTENSE SRL - TECNICHE DI ASSEMBLAGGIO
Italy
Thread standard: Metric, ISO DIN 13 Type: Machine tap Form B with spiral entry, for through holes Application: Overlengthed (long shank) L=100 Material of product: HSSE Surface treatment: no For materials: Unalloyed and low alloyed steel, non abrasive material Tensile strength up to: 900 N/mm2 Standard: DIN 371/376 Tolerance: ISO2/6H Tap for machine use and through holes. The spiral point pushes the chips ahead and prevents clogging of the flutes. Overlengthed (long shank), L=100 Our taps and dies are produced to the highest quality standards, to ensure precise quality threads. Wide range of hand, machine and rolling taps, dies and tools for cutting professional threads on various materials Correct lubrication is important for successful thread cutting and to decrease the wear of taps and dies. We recommend using our lubricants.
Request for a quoteINTENSE SRL - TECNICHE DI ASSEMBLAGGIO
Italy
Thread standard: Metric, ISO DIN 13 Type: Machine tap Form B with spiral entry, for through holes Application: For special alloys Material of product: HSSE PM Surface treatment: TiAlN For materials: Nickel-based superalloys (Incoloy, Inconel, Hastelloy,…), etc* Tensile strength up to: 1200 N/mm2 Standard: DIN 371/376 Tolerance: ISO2/6H Special geometry, base material (powder metal) and surface treatment for nickel-based superalloys. The TiAlN surface treatment increases the surface hardness (approx. 3300 HV), the sliding properties (friction coefficient: 0,25) and with high temperature resistance up to 800°C. It provides a better cutting performance and increased tool life time. The base material is powder metal (HSSE PM) with a higher hardness and toughness. Tap for machine use and through holes. The spiral point pushes the chips ahead and prevents clogging of the flutes.
Request for a quoteINTENSE SRL - TECNICHE DI ASSEMBLAGGIO
Italy
Thread standard: Metric, ISO DIN 13 Type: Machine tap Form B with spiral entry, for through holes Application: For aluminium Material of product: HSSE Surface treatment: TiAlN For materials: Pure Aluminium, Aluminium cast and wrought alloys, Soft iron etc* Tensile strength up to: 700 N/mm2 Standard: DIN 371/376 Tolerance: ISO2/6H Special geometry, base material and surface treatment for light alloys (Aluminium, Copper, etc). The TiAlN surface treatment increases the surface hardness (approx. 3300 HV), the sliding properties (friction coefficient: 0,25) and with high temperature resistance up to 800°C. It provides a better cutting performance and increased tool life time. Tap for machine use and through holes. The spiral point pushes the chips ahead and prevents clogging of the flutes. Materials: Soft Iron Pure Aluminium, Aluminium cast and wrought alloys Si<5% (long-chipping) Pure Copper, Copper alloys and copper-zinc alloys (long-chipping)
Request for a quoteINTENSE SRL - TECNICHE DI ASSEMBLAGGIO
Italy
Thread standard: Metric, ISO DIN 13 Type: Machine tap Form B with spiral entry, for through holes Application: General use (universal tap) Material of product: HSSE Surface treatment: TiAlN For materials: Steel and steel alloys, Stainless steel, Cast iron, Titanium and alloys, Nickel and alloys, Copper and alloys, Aluminium, Aluminium cast and Wrought alloys, etc* Tensile strength up to: 1200 N/mm2 Standard: DIN 371/376 Tolerance: ISO2/6H UNiTap - Universal High-End Threading Tap. A real revolution in production of internal threads: for nearly all materials for nearly all production cases excellent thread quality high life-time unique patented cutting geometry ideal tap for all workshops and manufacturing with changing applications huge costs savings - only one threading tool for all applications The TiAlN surface treatment increases the surface hardness (approx. 3300 HV), the sliding properties (friction coefficient: 0,25) and with high temperature resistance up to 800°C.
Request for a quoteINTENSE SRL - TECNICHE DI ASSEMBLAGGIO
Italy
Thread standard: Metric, ISO DIN 13 Type: Machine tap Form B with spiral entry, for through holes Application: For high-tensile materials and stainless steel Material of product: HSSE PM Surface treatment: TiAlN For materials: High-tensile materials, Stainless steel, Alloyed heat-treatable steel, Cast iron, Aluminium cast and wrought alloys, etc* Tensile strength up to: 1200 N/mm2 Standard: DIN 371/376 Tolerance: ISO2/6H Special geometry, base material and surface treatment for Stainless steel. The TiAlN surface treatment increases the surface hardness (approx. 3300 HV), the sliding properties (friction coefficient: 0,25) and with high temperature resistance up to 800°C. It provides a better cutting performance and increased tool life time. The base material is powder metal (HSSE PM) with a higher hardness and toughness. Tap for machine use and through holes. The spiral point pushes the chips ahead and prevents clogging of the flutes.
Request for a quoteINTENSE SRL - TECNICHE DI ASSEMBLAGGIO
Italy
Thread standard: Metric, ISO DIN 13 Type: Hand tap, Form C, for through and blind holes, with straight flutes Application: Conical profile Material of product: HSSG Surface treatment: no For materials: Unalloyed and low alloyed steel, non abrasive material Tensile strength up to: 900 N/mm2 Standard: DIN 352 Tolerance: ISO2/6H With conical profile Set of 3 taps (taper, intermediate, finish). Three-piece hand taps- sets are used for regular threads with coarse pitch, as the thread profile area is larger than for fine threads and the force effects on the taps are greater. The advantage of three-piece hand taps is that the respective parts of a set share the cutting power: The taper tap (No. 1) (marked with one ring) removes 65 per cent of the thread profile and the intermediate tap (No. 2) (marked with two rings) removes 85 per cent. Pre-cutting and reworking with the intermediate tap (No. 2) bring the thread into shape.
Request for a quoteINTENSE SRL - TECNICHE DI ASSEMBLAGGIO
Italy
Thread standard: Metric, ISO DIN 13 Type: Hand tap, Form C, for through and blind holes, with straight flutes Application: For stainless steel Material of product: HSSE Surface treatment: VAP For materials: Stainless steel, Wear resistant steel, High alloyed steel Tensile strength up to: 1400 N/mm2 Standard: DIN 352 Tolerance: ISO2/6H The oxide surface (vaporized) improves the adhesion of the cutting oil and provides a stabil lubricant film. Cold welding in the tap flanks is reduced. Set of 3 taps (taper, intermediate, finish). Three-piece hand taps- sets are used for regular threads with coarse pitch, as the thread profile area is larger than for fine threads and the force effects on the taps are greater. The advantage of three-piece hand taps is that the respective parts of a set share the cutting power: The taper tap (No. 1) (marked with one ring) removes 65 per cent of the thread profile and the intermediate tap (No. 2) (marked with two rings) removes 85 per cent.
Request for a quoteINTENSE SRL - TECNICHE DI ASSEMBLAGGIO
Italy
Brand: Baer Tools (Germania) We are available for the questions about this product by phone, email or chat here on the site
Request for a quoteINTENSE SRL - TECNICHE DI ASSEMBLAGGIO
Italy
Brand: Baer Tools (Germania) We are available for the questions about this product by phone, email or chat here on the site
Request for a quoteINTENSE SRL - TECNICHE DI ASSEMBLAGGIO
Italy
Brand: Baer Tools (Germania) We are available for the questions about this product by phone, email or chat here on the site
Request for a quoteINTENSE SRL - TECNICHE DI ASSEMBLAGGIO
Italy
Brand: Baer Tools (Germania) We are available for the questions about this product by phone, email or chat here on the site
Request for a quoteINTENSE SRL - TECNICHE DI ASSEMBLAGGIO
Italy
Brand: Baer Tools (Germania) We are available for the questions about this product by phone, email or chat here on the site
Request for a quoteINTENSE SRL - TECNICHE DI ASSEMBLAGGIO
Italy
Screw extractor Brand: Baer Tools (Germania) We are available for the questions about this product by phone, email or chat here on the site
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
INTENSE SRL - TECNICHE DI ASSEMBLAGGIO
Italy
The self-clinching stud is the modern and rational alternative to the weld-on stud. The stud is easily applied to metal sheets of various thicknesses creating a secure, unequaled-looking attachment with very high strength values. There is almost no damage to the surface of the sheet metal and its treatment This self-clinching stud is part of our line of self-clinching inserts. All Clinch inserts are installed using a simple punch During installation process, the fastener is placed in an appropriately sized hole and then compressed by means of a punch, applyinng only sufficient pressure to squeeze the stud head and its under head tooth features into the parent sheet. The sheet metal experiences plastic deformation and locks the fastener firmly to itself. After installation the spigot joint should be flush with the sheet, so the result is aesthetically perfect. And the tooth locking feature provides high tensile as well as torsional strength
Request for a quoteINTENSE SRL - TECNICHE DI ASSEMBLAGGIO
Italy
A single-thread galvanized steel self-tapping screw with a trilobal shank and single thread with 45°degree angle Pan head Standard Pozidriv-type cross impression (Torx impression is also available upon request) The special shape of its cross-section, the high ratio of the outer diameter to the diameter of the shank, the large pitch of its thread and the narrow angle at the apex of the 45 degrees threads ensure the best anchorage in plastic materials Better distributed and lower value stresses in plastic materials, highly vibration- and tear-resistant tightening, reduced risk of cracking in materials, screwing with low torque value Specially designed to provide reliable fastenings in a wide variety of thermoplastic materials, such as ABS, polyamide e.g. Nylon 6-6, PVC and polycarbonate Very simple installation using a regular screwdriver
Request for a quoteINTENSE SRL - TECNICHE DI ASSEMBLAGGIO
Italy
A single-thread galvanized steel self-tapping screw with a trilobal shank and single thread with 45°degree angle Cylindrical head Standard Pozidriv-type cross impression (Torx impression is also available upon request) The special shape of its cross-section, the high ratio of the outer diameter to the diameter of the shank, the large pitch of its thread and the narrow angle at the apex of the 45 degrees threads ensure the best anchorage in plastic materials Better distributed and lower value stresses in plastic materials, highly vibration- and tear-resistant tightening, reduced risk of cracking in materials, screwing with low torque value Specially designed to provide reliable fastenings in a wide variety of thermoplastic materials, such as ABS, polyamide e.g. Nylon 6-6, PVC and polycarbonate Very simple installation using a regular screwdriver
Request for a quoteINTENSE SRL - TECNICHE DI ASSEMBLAGGIO
Italy
A single-thread galvanized steel self-tapping screw with a 30-degree angle. Cylindrical head Standard Pozidriv-type cross impression (Torx impression is also available upon request) Reduced core and wide thread pitch for high performance in plastic materials Specially designed to provide reliable fastenings in a wide variety of thermoplastic materials, such as ABS, polyamide e.g. Nylon 6-6, PVC and polycarbonate Very simple installation using a regular screwdriver
Request for a quoteINTENSE SRL - TECNICHE DI ASSEMBLAGGIO
Italy
Spirol coiled spring pins are coupling elements manufactured from rolled steel. They have a spiral shape and 2 1/4 coil cross-section, which gives them considerable radial flexibiliyt. This flexibility, together with the absence of the axial shear common to normal spring pins, enables them to perform at a superior level in the presence of shocks and vibrations between coupled elements. Coiled spring pins are available in three duties, light duty, standard duty and heavy duty, to provide a variety of combinations of strength, flexibility and diameters to accommodate different host materials and applications. Available in Carbon Steel (C67S HV420-545), Nickel Stainless Steel (AISI 304 hardened HV120). And also in Chrome Stainless Steel (AISI 420 HV460-560) upon request. HEAVY duty: ISO 8748, DIN 7344, UNI 6876 Wherever space allows, use Standard Duty Coiled pins. They have the optimum combination of strength and flexibility for use in nonferrous and mild steel assemblies.
Request for a quoteINTENSE SRL - TECNICHE DI ASSEMBLAGGIO
Italy
Spirol coiled spring pins are coupling elements manufactured from rolled steel. They have a spiral shape and 2 1/4 coil cross-section, which gives them considerable radial flexibiliyt. This flexibility, together with the absence of the axial shear common to normal spring pins, enables them to perform at a superior level in the presence of shocks and vibrations between coupled elements. Coiled spring pins are available in three duties, light duty, standard duty and heavy duty, to provide a variety of combinations of strength, flexibility and diameters to accommodate different host materials and applications. Available in Carbon Steel (C67S HV420-545), Nickel Stainless Steel (AISI 304 hardened HV120). And also in Chrome Stainless Steel (AISI 420 HV460-560) upon request. STANDARD duty: ISO 8750, DIN 7343, UNI 6875 Duty choice:Wherever space allows, use Standard Duty Coiled pins. They have the optimum combination of strength and flexibility for use in nonferrous and mild steel assemblies.
Request for a quoteINTENSE SRL - TECNICHE DI ASSEMBLAGGIO
Italy
Keensert high-strength threaded inserts enter in pre-threaded holes and are secured via their locking keys. In High duty series they have 2 or 4 locking keys (depending from diameter) which once positioned make the insert mechanically locked against unscrewing from rotation or vibrations. Keenserts are extremely robust, have high resistance to rotation and extraction, a very precise thread and are easy to install and remove. They are widely used in sectors such as mechanics or precision engineering, aeronautics and aerospace on light alloys, steel or cast iron. They can also be used in damaged threads in expensive components. The Keensert inserts are supplied with the locking keys already positioned inside the grooves. The pre-positioned keys ensure that by screwing the insert it automatically positions itself at the correct installation depth. Keenserts are installed using special Keenest installation tool.
Request for a quoteINTENSE SRL - TECNICHE DI ASSEMBLAGGIO
Italy
Keensert high-strength threaded inserts enter in pre-threaded holes and are secured via their locking keys. In Micro series they have 2 locking keys which once positioned make the insert mechanically locked against unscrewing from rotation or vibrations. Keenserts are extremely robust, have high resistance to rotation and extraction, a very precise thread and are easy to install and remove. They are widely used in sectors such as mechanics or precision engineering, aeronautics and aerospace on light alloys, steel or cast iron. They can also be used in damaged threads in expensive components. The Keensert inserts are supplied with the locking keys already positioned inside the grooves. The pre-positioned keys ensure that by screwing the insert it automatically positions itself at the correct installation depth. Keenserts are installed using special Keenest installation tool. As standard, Keenserts in MICRO series are
Request for a quoteINTENSE SRL - TECNICHE DI ASSEMBLAGGIO
Italy
Self-tapping insert installation tool for all types of self-tapping threaded inserts (with cutting slots Ensat 302, with cutting holes Ensat 307 and Ensat 308) and in different materials (galvanized steel, stainless steel, brass, plastic) For machine use Depth of grip adjustable with bushing Made in the EU. Intense srl is a market leader in the distribution of fastening systems for sheet metal, plastic and metal for 40 years. It is renowned for its thread inserts and self-tapping bushes, which have always been recognized by the market as products of excellent quality
Request for a quoteINTENSE SRL - TECNICHE DI ASSEMBLAGGIO
Italy
Self-tapping insert installation tool for all types of self-tapping threaded inserts (with cutting slots Ensat 302, with cutting holes Ensat 307 and Ensat 308) and in different materials (galvanized steel, stainless steel, brass, plastic) For manual use Depth of grip adjustable with bushing Made in the EU. Intense srl is a market leader in the distribution of fastening systems for sheet metal, plastic and metal for 40 years. It is renowned for its thread inserts and self-tapping bushes, which have always been recognized by the market as products of excellent quality
Request for a quoteINTENSE SRL - TECNICHE DI ASSEMBLAGGIO
Italy
High quality self-tapping ensat thread inserts. Made of ASIS 304 stainless steel Long version with three cutting holes, Ensat 308 standard Particularly designed for materials resistant to cutting and where you want to exclude any slight self-locking effect on the screw. With the same insertion torque, they exert a higher and better distributed cutting force compared to Ensat 302 inserts, having three cutting points instead of two. Similar to Ensat 307 but longer, so can be applied in thicker materials These inserts are self-tapping and do not require pre-threading. They can be easily installed by screwing them into the appropriately sized hole using the installation tool They are usually used to enforce or repair threads in metallic materials with low shear resistance (metal alloys, aluminum, cast iron, plastic, castings, etc.). These self-threading bushes have an internal thread for the screw and an external thread with cutting slots to insert itself into the material
Request for a quoteINTENSE SRL - TECNICHE DI ASSEMBLAGGIO
Italy
High quality zinc plated steel self-tapping ensat thread inserts. Made of galvanized steel, conforming to RoHS, this ensures excellent wear and corrosion resistance Short version with three cutting holes, Ensat 307 standard Particularly designed for materials resistant to cutting and where you want to exclude any slight self-locking effect on the screw. With the same insertion torque, they exert a higher and better distributed cutting force compared to Ensat 302 inserts, having three cutting points instead of two. Also Ensat 307 inserts are shorter than Ensat 308 and therefore ideal on thinner materials These inserts are self-tapping and do not require pre-threading. They can be easily installed by screwing them into the appropriately sized hole using the installation tool They are usually used to enforce or repair threads in metallic materials with low shear resistance (metal alloys, aluminum, cast iron, plastic, castings, etc.).
Request for a quoteResults for
Tools & hardware - Import exportNumber of results
200 ProductsCountries
Company type
Category