Environmental protection - Import export

The filming division is developing since 1973 and allows the company to cover all market needs by having a range of bags for mass market retailers, for recycling and for industry, produced entirely through the recycling and regeneration of waste in Polyethylene. This demonstrates a particular attention to environmental protection. Poliplast S.p.A. has been dealing with the regeneration and filming of L.D.P.E. since 1973. The finished product is the Solid Urban Waste Bag, more commonly called the garbage bag. With over forty years of experience, the company has managed to obtain a high quality product corresponding to the most varied requests of the difficult and competitive European market regarding sizes, thicknesses, colors, prints, packaging, labeling, etc. guaranteeing customers maximum availability and commercial flexibility, offering alternative products designed in our own laboratory.

The linear motion potentiometers series PR2S have a 26 mm diameter round section housing, 5 mm diameter shaft and two ball joints at the ends. Their measuring strokes range from 25 to 150 mm, and their standard resistive value is 5 KOhm. The conductive plastic resistive element grants the transducer a long life (100,000,000 motions), high independent linearity and virtually infinite resolution. The IP65 protection degree against environmental agents allow to employ the potentiometers series PR2S for severe applications, even outdoors, at extreme temperatures. AVAILABLE STROKES mm 25 – 50 – 75 – 100 – 150 AVAILABLE RESISTIVE VALUES 5 KOhm (standard) – Optional: 1 KOhm for PR2S 25

The linear motion potentiometers series PR have a 26 mm diameter round section housing and 5 mm diameter shaft. Their measuring strokes range from 25 to 150 mm, and their standard resistive value is 5 KOhm. The conductive plastic resistive element grants the transducer a long life (100,000,000 motions), high independent linearity and virtually infinite resolution. The IP65 protection degree against environmental agents allow to employ the potentiometers series PR for severe applications, even outdoors, at extreme temperatures. The potentiometer PR mounting method is extremely easy: it can be fixed by means of metal clamping brackets, or by the front screw thread. Several fittings are available: ball joint, self-aligning joint, feeler pin.

Thanks to their small size – 21 mm square section case – the linear potentiometers seris PT2S can be profitably employed for those applications where limited dimensions are a critical factor. Two ball joints are provided at both ends for air fixing. The series strokes range from 25 to 150 mm. The electrical connection is granted by means of M12 connector. The stout extrused aluminium case grants a high protection degree against environmental agents.

Thanks to their small size – 21 mm square section case – the linear potentiometers seris PT can be profitably employed for those applications where limited dimensions are a critical factor. The series strokes range from 25 to 150 mm. The electrical connection is granted by means of M12 connector. The stout extrused aluminium housing grants a high protection degree against environmental agents.

The linear motion potentiometers series PN2S have a 31 mm square section housing, 6 mm diameter shaft and two fixing ball joints at the ends. Their measuring strokes range from 50 to 750 mm, and their standard resistive value is 5 KOhm. The conductive plastic resistive element grants the transducer a long life (100,000,000 motions), high independent linearity and virtually infinite resolution. The electrical connection is granted by M12 connector. Thanks to their high protection degree against environmental agents the potentiometers series PN2S are suited for severe applications, even outdoors, at extreme temperatures.

The linear motion potentiometers series PNS have a 31 mm square section housing and 6 mm diameter shaft. Their measuring strokes range from 50 to 950 mm, and their standard resistive value is 5 KOhm. The conductive plastic resistive element grants the transducer a long life (100,000,000 motions), high independent linearity and virtually infinite resolution. The connections are granted by means of M12 connector. Thanks to their high protection degree against environmental agents the potentiometers series PNS are suited for severe applications, even outdoors, at extreme temperatures.

Stout, easy to install, highly protected against environmental agents: ELAP linear wire potentiometers series HPS are the ideal solution for those industrial applications which require high accuracy and measuring length up to 8 metres. The series HPS, with potentiometer output, is supplied with strokes ranging from 250 to 8000 mm, ±0.25% linearity, 5 KOhm resistance and infinite resolution. The analogue output signals 4-20 mA or 0/10V are also optionally available. The types HPS-S, HPS-M and HPS-L differ for mechanical size and measuring stroke. Series HPS-S: 250, 500, 1000 mm Series HPS-M: 500, 750, 1000, 1250, 1500, 2000, 3000, 4000 mm Series HPS-L: 3000, 4000, 5000, 6000, 8000 mm

Stout, easy to install, highly protected against environmental agents: ELAP wire encoders series HLS are the ideal solution for those industrial applications which require high accuracy and measuring length up to 12 metres. The encoder HLS is available with strokes ranging from 1000 to 12000 mm, and resolutions ranging from 0.04 to 1 mm, push-pull or line driver output signal. The types HLS-S, HLS-M and HLS-L differ for mechanical size and measuring stroke. Series HLS-S: 1000 mm – Resolution mm: 0.04 – 0.1 – 0.2 – 0.5 – 1 Series HLS-M: 1000, 2000, 3000, 4000, 5000 – Resolution mm: 0.05 – 0.1 – 0.2 – 0.5 -1 Series HLS-L: 6000, 7000, 8000, 9000,10000, 11000, 12000 mm – Resolution mm: 0.5 – 1

Accurate, strong, easy to mount, and weatherproof, the transducers series PD and PE are the ideal solution when you need to measure thickness or control linear displacement on any kinf of industrial machine. High reading resolution (up to 0.005 mm) Easy mounting method High protection against environmental agents (IP65) Strokes: 60 ÷ 990 mm

The small size encoders series RE40 feature great accuracy, compact size and stoutness. The incremental encoder RE40 can be supplied with different mechanical flanges: the type RE40 has 6 fixing holes on diameter 30 mm, while the encoder E40V has a front fixing screw, and the series RE40Q is provided with a square flange of mm 43×43. The types RE40M and RE40S are hollow shaft encoders designed for motor coupling, respectively by joint and by anti-rotational elastic metal support. For all the types the ppr no. ranges from 2 to 12500, with or without zero pulse (RE40 or RE41). The aluminium housing, with axial or radial cable gland, grants IP65 protection degree against environmental agents.

Stout and reliable the incremental rotary encoders series SEB/SEB-Z can be employed in severe conditions. They can be supplied in the bidirectional type (SEB) or bidirectional with zero reference pulse (SEB-Z). The number of pulses per revolution ranges from 2 to 12500. The types SEB-M/SEBZ-M operate according to the magnetic principle, with a number of ppr ranging from 8 to 2048. The ABS plastic case offers high protection against environmental agents – IP65 degree, which can be upgraded to IP66 with the optional O-ring mounted on the encoder shaft. The connections are provided by cable or connector in axial position; the output signals can feature the NPN open collector, push-pull or line-driver format.

Compact sized – Ø 50 mm x 48 mm – and stout, incremental encoders series RE50 are specially engineered for industrial use. The number of pulses per revolution ranges from 2 to 12500, with or without zero reference pulse.. The aluminium case offers PI65 protection degree against environmental agents. The connections are provided by cable or M12 connector in axial position; the output signals can feature the push-pull or line-driver format.

The incremental encoders series REV ensure high performances in terms of reading accuracy and signal stability. The aluminium housing offers an excellent protection against environmental agents and makes them suitable for applications in harsh environments. They can be supplied with round clamping or sychro flange, or square flange.