Results for
SARTEX S.R.L.
Italy
Adjustable galvanized steel leaf rake with conical socket. Equipped with 22 adjustable flat tines. Opening from 26cm to 47cm. Weight: 480gr. Socket diameter: Ø24mm.
Request for a quoteSARTEX S.R.L.
Italy
Forged hoe round eye. Weight: 600gr. Eye diameter: Ø39-36mm.
Request for a quoteSARTEX S.R.L.
Italy
Caulking gun with rotating tank. Ergonomic aluminum handle.
Request for a quoteSARTEX S.R.L.
Italy
Forged grass sickle. With plastic blade protection. Working width: 20cm.
Request for a quoteSARTEX S.R.L.
Italy
Professional ratchet lopper. Blade covered in anti-rust Teflon. Telescopic aluminum handles. Bi-material handle. Packed in soft plastic with hanging eyelet.
Request for a quoteSARTEX S.R.L.
Italy
Professional hedge shears with wavy blades. Telescopic aluminum handles. Blade covered in anti-rust Teflon. Non-slip bi-material handle. Length from 680mm to 865mm. Packed in soft plastic with hanging eyelet.
Request for a quoteSARTEX S.R.L.
Italy
Aluminum pruning shears. Curved blade with anti-rust coating. Anti-slip handle. Lock with safety notch. Packed in blister.
Request for a quoteSARTEX S.R.L.
Italy
Forged square hoe with fork. Round eye. Weight: 500gr. Eye diameter: Ø31-29mm.
Request for a quoteSARTEX S.R.L.
Italy
Forged fork 4 tines. Single piece. Colour: gold.
Request for a quoteSARTEX S.R.L.
Italy
Forged and hardened steel splitting wedge. Epoxy powder coating.
Request for a quoteSARTEX S.R.L.
Italy
Steel try square, single piece cut with laser. Painted with red epoxy powder.
Request for a quoteSARTEX S.R.L.
Italy
Rectangular level with 3 vials. Made of painted reinforced aluminium. Extremities made of shockproof material.
Request for a quoteSARTEX S.R.L.
Italy
Galvanized paint mixer. With perforated rubber pad for hanging. Suitable for mixing high viscosity materials such as tile and construction adhesives, mortars, premixed plasters and concrete.
Request for a quoteSARTEX S.R.L.
Italy
Three-component sledgehammer handle with fiberglass core and soft rubber grip for sledge hammer, stoning hammer and splitting maul Length: 90cm Size: 49x35mm For paired, gem and log splitter hammers
Request for a quoteSARTEX S.R.L.
Italy
Round tip trowel. Steel blade. Wooden handle.
Request for a quoteSARTEX S.R.L.
Italy
Forged steel wrecking bar. Hardened extremities. Epoxy painted.
Request for a quoteSARTEX S.R.L.
Italy
Bolt cutter with high quality tool steel blade. Ergonomic non-slip handle.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
SARTEX S.R.L.
Italy
Barrier tape for generic signals, in two-tone white and red polyethylene. Packed in bulk.
Request for a quoteSARTEX S.R.L.
Italy
Pulley with cast iron wheel. Steel pin, hook and frame.
Request for a quoteSARTEX S.R.L.
Italy
Hardened mud scraper. Sturdy socket. Socket diameter: Ø35mm.
Request for a quoteSARTEX S.R.L.
Italy
Painted steel hay rake. Reinforced. 20 tines. Socket diameter: Ø28mm.
Request for a quoteSARTEX S.R.L.
Italy
Regrindable pointed chisel in chrome vanadium steel. Special hardening on the tip that allows it to be re-sharpened without further treatments. Structural strength increased by the ribs. Round section 16mm.
Request for a quoteSARTEX S.R.L.
Italy
Carpenter roofing hammer with tubular handle. Two-component handle. Weight: 600gr.
Request for a quoteSARTEX S.R.L.
Italy
German type machinist hammer made of hardened forged steel painted with epoxy powder. Painted wood handle fixed to the head with a round metal wedge and transparent resin.
Request for a quoteINTENSE SRL - TECNICHE DI ASSEMBLAGGIO
Italy
Thread standard: Metric, ISO DIN 13 Type: Machine tap Forma C, for blind holes, with spiral flutes Application: Oversized diameter 7G Material of product: HSSE Surface treatment: no For materials: Unalloyed and low alloyed steel, non abrasive material Tensile strength up to: 900 N/mm2 Standard: DIN 371/376 Tolerance: ISO3/7G Tap for machine use and through holes. The spiral point pushes the chips ahead and prevents clogging of the flutes. Tolerance 7G – allowance for distortion caused by heat treatment. Our taps and dies are produced to the highest quality standards, to ensure precise quality threads. Wide range of hand, machine and rolling taps, dies and tools for cutting professional threads on various materials Correct lubrication is important for successful thread cutting and to decrease the wear of taps and dies. We recommend using our lubricants.
Request for a quoteINTENSE SRL - TECNICHE DI ASSEMBLAGGIO
Italy
Thread standard: Metric Fine, ISO DIN 13 Type: Hand tap, Form C, for through and blind holes, with straight flutes Application: Left-hand Material of product: HSSG Surface treatment: no For materials: Unalloyed and low alloyed steel, non abrasive material Tensile strength up to: 900 N/mm2 Standard: DIN 2181 Tolerance: ISO2/6H Left-hand (counter clockwise rotation). Set of 2 taps (taper, finish). Two-piece hand taps- sets are used for fine threads with a smaller pitch than with coarse thread, as the thread profile surface is smaller than with coarse threads and the force effects on the taps are smaller. The advantage of two-piece hand taps is that the respective parts of a set share the cutting power: The taper tap (No. 1) (marked with a ring) removes 65 per cent of the thread profile and the and brings the thread into shape. The finishing tap (No. 3) has no ring marking and cuts the remaining thread profile to produce the 100% full and usable thread.
Request for a quoteINTENSE SRL - TECNICHE DI ASSEMBLAGGIO
Italy
Sturdy and elegant transportable toolbox with centralized drawer locking. Filled with 47 professional tools, rationally stored in the thermoformed drawers Powder coated Guides on ball bearings
Request for a quoteINTENSE SRL - TECNICHE DI ASSEMBLAGGIO
Italy
The Sonic booster range offers professional and reliable solutions for all users. In terms of power, our range starts where other competitors end theirs. Our least powerful batteries deliver more power than most average batteries of competing products. Don't be misled by booster and battery ratings! When it comes to jump starting vehicles, what really maters is the power in Cranking Amps (CA), not in Peak Amps (PA). In addition to powerful AGM batteries, our boosters are all equipped with high-quality components; double insulated cables, fully insulated clamps with curved and bronze jaws and resistant Anderson connectors. The Sonic boosters are professional tools designed for professional and intensive use. High capacity AGM battery Starting amps: 800CA Cables: pure copper, double insulation 155 cm / 25 mm Battery charger: Automatic 12V 1.3A Analogue voltmeter 12V DC socket (input and output) 300A fuse for short circuit protection Heavy duty terminals Rotomolded plastic casing
Request for a quoteINTENSE SRL - TECNICHE DI ASSEMBLAGGIO
Italy
The extra deep Sonic Equipment NEXT S12XD toolbox is the perfect choice for technicians looking for an advanced toolset. The noticeable extra depth is what sets this one apart from other similar toolboxes. The NEXT S12XD is 63cm deep, allowing for additional storage space in still such a compact and easy maneuverable unit. Extra deep toolbox for maximum storage capacity Reinforced stainless steel worktop with integrated side pockets Spray can holder and paper roll holder 4 heavy duty casters with 350kg loading capacity each 8 XL drawers, of which 7 are shallow and 1 is deep Shallow drawers are equipped with 60kg telescopic ball bearing slides Deep drawers are equipped with 120kg double slides Advanced drawer blocking system for anti-tilt protection Total loading capacity of 1050kg Tool set suitable for heavy work
Request for a quoteResults for
Hardware - Import exportNumber of results
227 ProductsCountries
Company type
Category