• europages
  • >
  • COMPANIES - SUPPLIERS - SERVICE PROVIDERS
  • >
  • safety locks

Results for

Safety locks - Import export

ItalyManufacturer/producer

Italy

Verified by Europages

The hook for forks MKFP 100 is made from a sturdy steel frame suitable for insertion of forks with section max. mm. 135x50, screws for locking to the forks and lifting swivel hook fitted with a safety lock. The fork hook allows you to safely lift loads up to 1000 Kg. Before purchasing it is essential to make sure that your lifter is certified to raise up 1000 Kg, considering installing this hook at about half the length of the forks.

Request for a quote

Italy

Verified by Europages

Main features • Short mixing time • Extremely high mixing quality • Batches with repeatable results • Mixing ratio 1/100.000 • Coefficient of variation (CV): ≤ 3 % • Low maintenance Techanical features • Batch size: from 65 to 28.000 liters (net) • Cylindrical mixing chamber • MIxing tools: ploughshare / ploughshare with toothed design / Mix Paddle / Mix Paddle with toothed design • Material of costruction: carbon steel / Hardox 450 / AISI 304 / AISI 316 / AISI 316Ti • Inspection door complete with safety electric lock • Discharge door with round profile, building the bottom side of the mixing chamber • Rotor shaft with turned and coaxial ends • Rotor shaft sealing system with packing seals and wear resistant ferrules to protect the rotor shaft, prepared for flushing with air / nitrogen

Request for a quote

Italy

Verified by Europages

Main features • Short mixing time • Extremely high mixing quality • Batches with repeatable and scalable results • Mixing ratio 1/100.000 • Coefficient of variation (CV): ≤ 3 % • Low maintenance • Functional design for installation in R&D area Techanical features • Batch size: 1,4 / 3 / 7 / 20 liters (net) • Cylindrical mixing chamber • MIxing tools: ploughshare / ploughshare with toothed design / Mix Paddle / Mix Paddle with toothed design • Material of costruction: AISI 304 / AISI 316 / AISI 316Ti • Discharge door with round profile, building the bottom side of the mixing chamber • Front side inspection door complete with safety electric lock • Electric control panel with inverter for speed variation of the main rotor shaft • Internal finishing with roughness Ra 0.5-0.8 µm

Request for a quote

Italy

Verified by Europages

Bench cutter with lever, portable, suitable for cutting of cardboard corners. Equipped with ergonomic handle with safety latch to lock it when the cutter is not in use and a small compartment for storing rulers, blades, markers and pens and leave the workbench ordered. Operation is very simple, simply enter the portion of the corner you want to cut into the slot and pull the lever down. The cutter is used during packaging operations to cut safety corners, normally 2 meters long, into smaller pieces to be placed on the corners of boxes and pallets to strengthen them and protect them during transport.

Request for a quote

Italy

Verified by Europages

Main features • Mixing times adaptable to the specific process • Extremely high mixing quality • Constant quality of the product output • Mixing ratio 1/100.000 • Coefficient of variation (CV): ≤ 3 % • Low maintenance Techanical features • Hourly productivity: from 500 to 1.200.000 liters/h • Cylindrical mixing chamber • MIxing tools: ploughshare / ploughshare with toothed design / Mix Paddle / Mix Paddle with toothed design • Material of costruction: carbon steel / Hardox 450 / AISI 304 / AISI 316 / AISI 316Ti • Inspection door complete with safety electric lock • Vertical discharge door with adjustable internal diaphgrams to regulate the production capacity • Rotor shaft with turned and coaxial ends • Rotor shaft sealing system with packing seals and wear resistant ferrules to protect the rotor shaft, prepared for flushing with air / nitrogen

Request for a quote

Do you sell or make similar products?

Sign up to europages and have your products listed

Add my business

Italy

Verified by Europages

Main features • Short mixing time • Extremely high mixing quality • Batches with repeatable results • Mixing ratio 1/100.000 • Coefficient of variation (CV): ≤ 3 % • Low maintenance • Easy deep cleaning Techanical features • Batch size: from 65 to 28.000 liters (net) • Cylindrical mixing chamber • MIxing tools: ploughshare / ploughshare with toothed design / Mix Paddle / Mix Paddle with toothed design • Material of costruction: carbon steel / Hardox 450 / AISI 304 / AISI 316 / AISI 316Ti • Full access to mixing chamber through the extractable rotor shaft • Inspection door complete with safety electric lock • Discharge door with round profile, building the bottom side of the mixing chamber • Rotor shaft with turned and coaxial ends • Rotor shaft sealing system with packing seals and wear resistant ferrules to protect the rotor shaft, prepared for flushing with air / nitrogen

Request for a quote

Italy

Verified by Europages

HYDRAULIC DRUMS TILTER MOD. DA-FP 45 for metal or plastic drums. The new drums-tilter mod. DA-FP 45 is equipped with hook and safety band and is suitable for lifting, transporting, emptying both 210 liter metal and plastic drums. Equipped with hydraulic system with pedal or rudder drive, push handles, angular transmission with practical handwheel for drum rotation, hook and safety band to lock the drum, nylon wheels with high smoothness and brake. The lifter can also be used as a stacker for stacking or for positioning the drums on shelves with a maximum height of 1500 mm. The rotation also allows the drum to be placed horizontally at a height of 1650 mm from the ground. RAL 1028 yellow painting. Attention: the drum turner is suitable for handling metal drums or plastic drums with rim (as in the photo). Do not use for different drums.

Request for a quote

Italy

Verified by Europages

731805 Sonic Equipment MSS 2193mm setup with stainless steel worktop Sonic Equipment offers two modular storage solutions. MSS and the premium variant MSS+. Sonic Modular Storage System (MSS) has been a successful part of our product range for years. This long-lasting favorite is the perfect way to maximize the efficiency and organization of your professional workplace: Modular construction Over 34 different modules & elements 0,8 mm sheet steel self-supporting system Electrostatic powder coating to protect against scratches, wear & corrosion Wood or Stainless Steel top blade Safety drawer blocking system for mobile cabinets Key safety lock for each cabinet Compatible with Sonic Foam System 10-year warranty

Request for a quote

Italy

Verified by Europages

Sonic Equipment offers two modular storage solutions. MSS and the premium variant MSS+. Sonic Modular Storage System (MSS) has been a successful part of our product range for years. This long-lasting favorite is the perfect way to maximize the efficiency and organization of your professional workplace: Modular construction Over 34 different modules & elements 0,8 mm sheet steel self-supporting system Electrostatic powder coating to protect against scratches, wear & corrosion Wood or Stainless Steel top blade Safety drawer blocking system for mobile cabinets Key safety lock for each cabinet Compatible with Sonic Foam System 10-year warranty

Request for a quote

Italy

Verified by Europages

D.76 tank cap with key for gasoline, diesel or biodiesel, hydraulic oil and lubricating oil, in technopolymer and steel material, with internal bayonet coupling passage diameter 40 mm and different types of sealing gasket in relation to the fluid in the tank. It is available hermetic or ventilated. We can propose this product in a wide range of colors (gray, blue, red, green, white) for various needs in different sectors and, at your request, equipped with safety chains or cables or lock protection door to protect it from dust, debris residues and rainwater. We supply this cap with variable or fixed code key or with the universal fixed code key 455: in this case, a single key allows to open all the components with keyed alike locking system, for example in a soundproofed cabin of power generator (cap with key, Pushbutton actuator with key, Handle with key, Selector switch activator key).

Request for a quote

Italy

Verified by Europages

D.76 tank cap with key for gasoline, diesel or biodiesel, hydraulic oil and lubricating oil, in technopolymer and steel material, with internal bayonet coupling passage diameter 40 mm and different types of sealing gasket It is available hermetic or ventilated. We can propose this product in a wide range of colors and equipped with safety chains or cables or lock protection door We supply this cap with variable or fixed code key or with the universal fixed code key 455. This product shall be sold with our bayonet filling systems passage 40 mm or with our niches for connection to flexible fuel hose passage Ø 60 mm or with our complete filling systems. The D.76 tank cap with key is used for different applications in several industrial fields, such as generating sets, soundproofed canopy gensets, container, lighting towers, earth moving machines, wheel excavators, auxiliary tanks and so on. Product resulted suitable to approval tests according to the International Standards.

Request for a quote