Rotating plate - Import export

DUAL is the innovative COMBINED system between security grate and shutter, which share the SAME FRAME and a SINGLE CLOSING SYSTEM, suitable for elegantly protecting every home DUAL BLIND is composed of: FRAME in galvanized steel on 3 sides made by thick bending. 20/10, with 60mm front fin – Minimum depth 107mm and 20mm H lower crosspiece. GRATED DOOR made with sturdy thick galvanized steel profiles. 20/10: lock holder upright has dimensions of 60x30mm, while the crosspieces and uprights on the hinge side are 40x30mm; and as a filler chosen from our aesthetic models. Steel LOCK without central hook, is equipped with deviators that control 4 solid steel locking pins diam. 18mm, 2 upper and 2 lower (one of which is CUT-PROOF ROTATING) which intercept the closing plates installed on the shutter leaf. ½ DRILL-RESISTANT SAFETY CYLINDER equipped as standard with 1 construction site key for installation, 3 master keys and a card for their duplication.

DUAL is the innovative COMBINED system between security grate and shutter, which share the SAME FRAME and a SINGLE LOCKING SYSTEM, suitable for elegantly protecting every home. DUAL ALL is composed of: FRAME in galvanized steel on 3 sides made by thick bending. 20/10, with 60mm front fin – Minimum depth 97mm and 20mm H lower crossbar. GRATED DOOR made with sturdy thick galvanized steel profiles. 20/10: lock holder upright has dimensions of 60x30mm, while the crosspieces and uprights on the hinge side are 40x30mm; and as a filler chosen from our aesthetic models. Steel LOCK without central hook, is equipped with deviators that control 4 solid steel locking pins diam. 18mm, 2 upper and 2 lower (one of which is CUT-PROOF ROTATING) which intercept the closing plates installed on the shutter leaf. ½ DRILL-RESISTANT SAFETY CYLINDER equipped as standard with 1 construction site key for installation, 3 master keys and a card for their duplication.

GENERAL OPERATION The machine is built-up of a rotating plate and a knot device that allow to create the requested wire ties. When the cycle is running, the pinch roll insert the wire in the machine and the rotating plate starts to rotate creating the wire ties. The crossed ends of the wire are held together and twisted by rotation of the gripper. AUTOMATIC CYCLE When the operator press the “start” button, the automatic cycle command is sent to the machine. This signal allow to insert the wire into the rotating plate following the sequence below: - Realignment and lifting of the twister. - Realignment of the wire step cylinder. - Closing of the pinch roll. - Moving forward of the puller. - Insertion of the wire by means of forward rotation of the pinch roll. When the twister is in high position, the puller is moved forward, in order to pull out the wire ties. With a time delay, the machine starts a new tying cycle (according to the number of the ties set in the operator’s panel).