Results for
FERPLAST SNC
Italy
Tabletop manual bag sealers with manual closing and electromagnetic block. Impulse heat sealing (the resistance heats for a few seconds) with timer for adjusting the sealing time and a timer for adjusting the cooling time. The sealing cycle is indicated by an indicator light. Sealing bar length: mm. 300 - 400 and sealing width of 5 mm, maximum thickness weldable 0.20 mm(mm. 0.40 total). Suitable for sealing plastic polyethylene bags of medium thickness, polypropylene, light coupled polyethylene + aluminum / paper.
Request for a quoteFERPLAST SNC
Italy
Impulse sealers MG 820 series, with 820 mm sealing bar and suitable for sealing polyethylene, pvc and polypropylene bags. They have a special timer for adjusting the sealing time based on the thickness and type of material. The MG sealers are complete with a manual cutting unit for the trimming of the sealed bags and/or the creation of bags from tubular reels (if the machine is equipped with a roll holder). The sealers bars must be closed manually by the operator and are automatically held by a magnet until the end of the cycle. There are special supports with mechanical pedal, for the manual sealing machine and with electric pedal for the sealing machine with motorized bar closing. Available models: MG 820: bench sealing machine with manual closing of the bars MGMI 820: bench sealing machine with motorized bar closing and electric pedal
Request for a quoteFERPLAST SNC
Italy
MG 421 SEALING MACHINE WITH CLOSING MAGNET Impulse sealers MG 421 series with 420 mm sealing bar and suitable for sealing polyethylene pvc and polypropylene bags. They have a special timer for adjusting the sealing time based on the thickness and type of material. The MG sealers are complete with a manual cutting unit for the trimming of the sealed bags and/or the creation of bags from tubular reels (if the machine is equipped with a roll holder). The sealing bars must be closed manually by the operator and are automatically held by a magnet until the end of the cycle. They can be equipped with special supports with mechanical pedal, for the manual sealing machine and with electric pedal for the sealing machine with motorized closing of the bars. The MG 421 series sealing machines are available with bars with mechanical or motorized closure with a sealing thickness of 3 or 5 mm depending on the model. There are also special models in stainless steel and with 2 parallel welds of 3 mm.
Request for a quoteFERPLAST SNC
Italy
Sealing Pliers designed for welding packaging of all sizes in the barrier material (polypropylene laminated paper and aluminum). Thanks to its small size and limited weight can be used anywhere. The pliers dual hot bar solder is available with a width mm. 300 and mm. 400 , furthermore the welds are repeatable side by side at any length. The temperature of the sealing bars is adjustable from 0 °C to 200 °C using a temperature controller positioned on the plier. Thanks to the coated bars with antiadhesive teflon, it is also possible to weld polyethylene bags of high thickness. (Min 100 my each side - my 250 max each side)
Request for a quoteFERPLAST SNC
Italy
Machine suitable for the closing of bags with height 200 to 700 mm and max weight. 10 kg. The system with two pairs of heating elements and belts PTFE allows the closing of bags made of polyethylene, polypropylene, cellophane, coated paper, laminated aluminum, etc .This particular welding system is strongly recommended in the presence of bags with high thickness and bellows side. The temperature is controlled by two electronic temperature controllers and the feed speed is adjustable. The distance between the solder and the edge of the bag is 30 mm. The welding head and the conveyor belt are independently adjustable in height through flyers. The machine is equipped with rotary solid ink marker and interchangeable characters (max. 20 characters with height 5 mm.). The system works with inked rollers for easy reading and comes complete with photocell to do the marking in the desired place.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
FERPLAST SNC
Italy
MG 1020 SEALING MACHINE WITH CLOSING MAGNET Pulse sealers MG 1020 series, with 1020 mm sealing bar and suitable for sealing polyethylene, pvc and polypropylene bags. They have a special timer for adjusting the sealing time based on the thickness and type of material. The MG sealers are complete with a manual cutting unit for the trimming of the sealed bags and/or the creation of bags from tubular reels (if the machine is equipped with a roll holder). The sealing bars must be closed manually by the operator and are automatically held by a magnet until the end of the cycle. There are special supports with mechanical pedal, for the manual sealing machine and with electric pedal for the sealing machine with motorized bar closing. Available models: MG 1020: bench sealing machine with manual closing of the bars MGMI 1020: bench sealing machine with motorized closing of the bars and electric pedal
Request for a quoteFERPLAST SNC
Italy
Impulse sealers MG 621 series, with 620 mm sealing bar and suitable for sealing polyethylene, pvc and polypropylene bags. They have a special timer for adjusting the sealing time based on the thickness and type of material. The MG sealers are complete with a manual cutting unit for the trimming of the sealed bags and/or the creation of bags from tubular reels (if the machine is equipped with a roll holder). The sealing bars must be closed manually by the operator and are automatically held by a magnet until the end of the cycle. There are special supports with mechanical pedal, for the manual sealing machine and with electric pedal for the sealing machine with motorized bar closing. The MG 621 series sealing machines are available with mechanical or motorized closing bars with 3 or 5 mm sealing thickness depending on the model. Also available in stainless steel with mechanical closure of the bars and and 3 mm sealing.
Request for a quoteFERPLAST SNC
Italy
MG 300 SEALING MACHINE WITH CLOSING MAGNET Impulse sealers MG 300 series, with 300 mm sealing bar and suitable for sealing polyethylene, pvc and polypropylene bags. They have a special timer for adjusting the sealing time based on the thickness and type of material. The MG sealers are complete with a manual cutting unit for the trimming of the sealed bags and/or the creation of bags from tubular reels (if the machine is equipped with a roll holder). The sealing bars must be closed manually by the operator and are automatically held by a magnet until the end of the cycle. There are special supports with mechanical pedal, for the manual sealing machine and with electric pedal for the sealing machine with motorized bar closing. Maximum weldable thickness 0.15 mm (0.30 tot). Available models: MG 300: bench sealing machine with manual closing of the bars MGM 300: bench sealing machine with motorized bar closing and electric pedal
Request for a quoteFERPLAST SNC
Italy
Heat-sealing roller FP802/803 with constant heat which allows the sealing of bags and heat-sealable materials. This roller allows you to make seals with different shapes (square, circular, etc.) according to your needs. Once the roller has been switched on, the operator must wait for the roller to warm up for about 10 minutes. The temperature is adjustable via a potentiometer and reaches a maximum of 200 ° C. There is no graduated scale. The temperature must therefore be set following practical tests on the material. The use is manual. The pressure, the sealing time and the temperature must be managed by the operator. The sealing result depends exclusively on its ability and therefore the result can vary between seals. The coating of the anti-adhesive Teflon roller allows to seal bags in polypropylene, polyethylene and laminated materials. It is supplied complete with a mat in silicone material which, positioned under the product to be sealed, is the ideal match for sealing.
Request for a quoteFERPLAST SNC
Italy
Machine suitable for the closing of bags with height, mm. to 150 mm. 270 and max weight. 3 kg. The welding system with belts PTFE allows for closing of bags made of polyethylene, polypropylene, cellophane, coated paper, laminated aluminum, etc. The temperature is adjustable from 0-250° C. and the feed speed is adjustable from 0 -12 mt. / min.The welding head is adjustable in height and the distance between the welding and the edge of the bag is 10 mm. The machine is equipped with rotary solid ink marker and interchangeable characters (up to 20 characters with a height of 5 mm.), The system works with inked rollers for easy management and is complete with a photocell to do the marking in the desired location. This model is constructed in the standard version, that is, the advancement of the product occurs from right to left.
Request for a quoteFERPLAST SNC
Italy
TABLE MONOBLOC SEALER WITH MANUALLY OPERATED SEALING BAR AN INCORPORATED ROLL HOLDER The SP 600 is equipped with sealing bar with NI-CR wire for simultaneous cutting and welding of the film. Allows to obtain a polyethylene or polypropylene bag, perfectly welded and trimmed, using the normal fold film. Suitable for use in laundries, shirt factories, the textile sector in general, but is also suitable for the food sector for the packaging of the bread. Operation: Place the coil with the open side facing the operator Insert the open-film blade between the two flaps Unroll the film to the desired length Lower the sealing bar and cut the bag Enter the product in the bag and make the welding of the side remained open.
Request for a quoteFERPLAST SNC
Italy
Machine suitable for closing bags mm height. 200 mm. 320 and max weight. 5 kg. The welding system belt PTFE allows closing bags made of polyethylene, polypropylene, cellophane, coated paper, laminated aluminum, etc.. The temperature is controlled by an electronic controller and thespeed is adjustable. The distance between the sealing and the edge of the bag is 10 mm. The sealing head is adjustable in height. The machine is equipped with a marker rotary heat and interchangeable characters (20 characters max height 5 mm.), The system works with inked rollers for easy readingand comes complete with photocell to make a mark at the desired point.
Request for a quoteFERPLAST SNC
Italy
These machines are suitable to the closure in horizontal bags with maximum height mm. 300 and max weight. 5 kg. The welding system with belts PTFE allows the closure of bags made of polyethylene, polypropylene, cellophane, coated paper, laminated aluminum, etc. The temperature is controlled by an electronic temperature controller and the feed speed is adjustable. The distance between the welding and the edge of the bag is 10 mm. The distance (width) between the welding head and the conveyor belt is adjustable and is also adjustable the height of the conveyor belt relative to the floor. The machine is equipped with rotary solid ink marker and interchangeable characters (20 characters max height 5 mm.), The system works with inked rollers for easy handling and comes complete with photocell to make the marking at the desired point.
Request for a quotePOLIPLAST SPA
Italy
The filming division is developing since 1973 and allows the company to cover all market needs by having a range of bags for mass market retailers, for recycling and for industry, produced entirely through the recycling and regeneration of waste in Polyethylene. This demonstrates a particular attention to environmental protection. Poliplast S.p.A. has been dealing with the regeneration and filming of L.D.P.E. since 1973. The finished product is the Solid Urban Waste Bag, more commonly called the garbage bag. With over forty years of experience, the company has managed to obtain a high quality product corresponding to the most varied requests of the difficult and competitive European market regarding sizes, thicknesses, colors, prints, packaging, labeling, etc. guaranteeing customers maximum availability and commercial flexibility, offering alternative products designed in our own laboratory.
Request for a quoteEUROCARTEX S.P.A.
Italy
Coated paper achieved throughout a hot extrusion process using low density polyethylene. Resin coated papers are an excellent packaging for fresh foods, fatty foods and wet and also for food grade bags. Packaging in polyethylene paper are suitable for direct contact with food, freshness guarantee, protection and meet the highest standards of food hygiene. Coated papers and burger interleaves are used in supermarkets, butcher shops, delicatessens and delis to wrap counter foods such as meats, cheeses and cooked foods. In fact, the food polyethylene creates a barrier against humidity, steam and odors. For the production of high quality wrappers and sugar bags Matt PELD is generally used.
Request for a quoteResults for
Polyethylene bag - Import exportNumber of results
16 ProductsCompany type